RSS Fetcher Posted November 9, 2018 Share Posted November 9, 2018 The key to successful appearance when using pigments is to apply small quantities at a time. This approach allows the gradual build-up of colour and texture, so that the subject is not overwhelmed. My technique involves the following steps: Make sure that the lid of the container is properly screwed on Give the container a brief shake Tap the container firmly on the work surface Open the container and inspect the inside of the lid/cap, where you should see a thin film of pigment Pick up some of this thin film on the tip of your filbert brush Tap the brush on the edge of the lid or pot Gently apply the remaining pigment to the model, moving the brush in a downward motion in the manner that rain would carry the dirt. The process will allow the representation of a dirt build-up that occurs over time: Attached thumbnail(s) View the full article 2 Link to post Share on other sites More sharing options...
Recommended Posts