RSS Fetcher Posted December 26, 2018 Share Posted December 26, 2018 On to part two of my TPO build, with the girls up very early again this morning (and distracted by their new toys). I snuck off to the railway room for half an hour before heading out for the day. The first task was fitting the final section of side, cutting to length and then flying into place. Once this dried the roof was temporarily fitted and attention moved on to the right hand panel. One side on my chosen prototype has a different window location. (A word of warning, it seems no two TPO coaches were the same, with windows and grills appearing in different places).Fortunately I have a lot of spare window frames from my Bachmann conversion. So after carving off the original frame and filling with evergreen strip, I drilled out and added the new frame. It now needs a bit of filler, the roof needs to be updated with different vents and it will be ready for paint. I looked at starting on the second one, but the chassis is a bit more difficult to use. I have stripped it down but I am now thinking I will look in my VSOE box and swap chassis with one of those (as it hopefully will have the raised edge that is required). NTA NSA NSA (t) NUA As many as I can show on Wheal Imogen. I need to find some OO disk wheels and get the bogies capable of working on Brent. (And I need to get the bits ordered for my 1940s equivalent set Attached thumbnail(s) View the full article Link to post Share on other sites More sharing options...
Recommended Posts