RMweb Premium CloggyDog Posted January 2, 2023 Author RMweb Premium Share Posted January 2, 2023 Just realised I forgot to account for the axle diameter when making the bogie inners 😣 I can hopefully salvage what I've done so far, if not it's only plasticard and time wasted. 3 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted February 6, 2023 Author RMweb Premium Share Posted February 6, 2023 Much progress with stock, ahead of Dounreay's debut at the Kenavon exhibition in east Reading on Saturday 18 February. Reworked my bogie inners to correct the wheelbase and finished 6 pairs, so the Mk1s are pretty much done, the pair of PMVs have wheels, paint and glazing, the 24/1 is decalled, glazed and fitted with Kadees and I'm working my way through the freight stock. The Bulleid Third Open is finished as Sc1466S, one of the dozen or so sent north of the border in the mid-1960s to replace Mk1s converted to REPs and TCs. The layout also now has it's own section on Maidenhead club's website: http://www.mmdmrc.org.uk/dounreay.html 9 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted February 8, 2023 Author RMweb Premium Share Posted February 8, 2023 The scratchbuilt Salmon and the 2 Grampuses that accompany it are decalled up and just need some grot, while a bunch of 16t mins, assorted VB revenue vans, highs, lows, Plate and Tube are getting their numbers and letters. The VB stock is also having the Lima brake gear reworked to bring the shoes in line with the wheels and tiebars fitted. I did find my spare Toad chassis, so am pondering making a Stanier 20t brake van body for it out of Evergreen car siding... watch this space, as they say... 10 3 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted February 10, 2023 Author RMweb Premium Share Posted February 10, 2023 And, befitting the c1970 setting, some blue & grey stock to mix in with the maroon, plus some completed vans and a lowfit. 14 2 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted February 16, 2023 Author RMweb Premium Share Posted February 16, 2023 (edited) Some final testing before Dounreay's debut on Saturday, with the fiddlestick made and wired up last evening. This did reveal that the Derby Type 2 was a tad light and struggled to haul trains, so this had some weight added this morning, which helped. Apart from that though, things seem good to go. Edited February 16, 2023 by CloggyDog 12 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted February 17, 2023 Author RMweb Premium Share Posted February 17, 2023 Found a slightly knackered Lima 20t brake van in the stash, one end of the body cracked and broken. Chassis still in reasonable nick, so I've started scratchbuilding a Stanier LMS 20t brake van body from Evergreen car-siding and assorted microstrip. Probably won't get it done for Kenavon on Saturday, but may have it with me as a wip for display. 2 5 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post CloggyDog Posted February 18, 2023 Author RMweb Premium Popular Post Share Posted February 18, 2023 Dounreay had it's very pleasant debut at Kenavon exhibition today and ran well, with plenty of positive comments and feedback. My thanks to @RJS1977 for the invitation, as always a nice friendly show with plenty of interesting layouts. A few minor stock-related things to sort before the next outing (DEMU Showcase in June) and I'm aiming to get at least 1 more loco into service by then, possibly 2 if I can. 19 2 Link to post Share on other sites More sharing options...
27105 Posted May 8, 2023 Share Posted May 8, 2023 On 07/02/2021 at 20:54, CloggyDog said: A little more progress to report, a set of scratchbuilt platform lamps, signage and the backscene now in place. The lamps used the Chris Nevard method, a length of 3mm bamboo rod, a nail and some plastic tube. The backscene used a panorama taken from Google Street View, played around with in MS Paint and printed across 6 landscape A4 sheets which were pritted together and trimmed to shape. Great little layout and well done. How did you make your totem signs? Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted May 8, 2023 Author RMweb Premium Share Posted May 8, 2023 5 hours ago, 27105 said: Great little layout and well done. How did you make your totem signs? Thanks! The totems I did using this source: http://homepages.enterprise.net/iainlogan/modelrail/free.html That included the large layout sign and also the tiny ones on the platform lamps, which I printed on thin card at about 10% scale (possibly even smaller) 4 Link to post Share on other sites More sharing options...
27105 Posted May 8, 2023 Share Posted May 8, 2023 2 hours ago, CloggyDog said: Thanks! The totems I did using this source: http://homepages.enterprise.net/iainlogan/modelrail/free.html That included the large layout sign and also the tiny ones on the platform lamps, which I printed on thin card at about 10% scale (possibly even smaller) Hi, Many thanks for your reply and useful link. Mark 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted May 23, 2023 Author RMweb Premium Share Posted May 23, 2023 The Stanier 20t brake has been completed and a second Derby Two is well underway using the other bogie from the Roco V90 under a Lincoln Locos 3D-printed bodyshell. A bunch of exhibitions coming up, DEMU Showcase in Sutton Coldfield Sat 17 & Sun 18 June, Maidenhead Club's summer show in Knowl Hill Sat 24 June and Woolwich on 10th December 9 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted June 5, 2023 Author RMweb Premium Share Posted June 5, 2023 Had a few hours of gentle plasticard-wrangling over the weekend to scratchbuild an Insul-Fish conversion of an LNER diagram 134 fish van, a handful of which lasted in fish service to the mid/late-60s, so just creeping into my timeframe. Rather pleased with how it came out, paint, decals* and a coat of grot to add. May well do another in due course. *assuming I can find the safe place I put my clear decal sheets... The 2nd Derby Two has some paint and will be finished as D5114, GSYE, decals from Railtec ordered. I'll be making good use of the test track at the club this evening! 12 2 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted June 13, 2023 Author RMweb Premium Share Posted June 13, 2023 (edited) Insul-Fish and a BR Insulated van finished and I've also redone Dounreay's backscene. Correct length this time and applied with more care. The horizon is a few cm lower, giving more sky. And I tracked down a couple of period poster images online and printed them off to help set the timeline. Pretty much ready for DEMU Showcase next weekend in Sutton Coldfield, followed by Maidenhead club's summer exhibition in Knowl Hill the Saturday after. Later in the year Dounreay will be at Bracknell show on Sun 29 Oct and Woolwich on Sun 10 Dec. Edited September 21, 2023 by CloggyDog 11 1 Link to post Share on other sites More sharing options...
RMweb Premium DavidLong Posted September 4, 2023 RMweb Premium Share Posted September 4, 2023 On 13/06/2023 at 08:09, CloggyDog said: Insul-Fish and a BR Insulated van finished and I've also redone Dounreay's backscene. Correct length this time and applied with more care. The horizon is a few cm lower, giving more sky. And I tracked down a couple of period poster images online and printed them off to help set the timeline. Pretty much ready for DEMU Showcase next weekend in Sutton Coldfield, followed by Maidenhead club's summer exhibition in Knowl Hill the Saturday after. Later in the year Dounreay will be at Bracknell show on Sun 29 Oct and Woolwich on Sun 3 Dec. Really pleased to see Dounreay at DEMU, Alan. I'd forgotten that it was on RMweb so I've just been back through all the posts that I've missed. It seems that its next appearances are at a bit of distance from Manchester so it may be a while before I can catch up with it again. David 1 Link to post Share on other sites More sharing options...
bradfordbuffer Posted November 16, 2023 Share Posted November 16, 2023 On 01/01/2023 at 21:29, CloggyDog said: With a show outing approaching (the Kenavon show in east Reading, mid-Feb) I thought I'd best crack on with enough stock to run a service. So a selection of my reworked Lima Mk1s have been painted, glazed, decalled (thank you RailTec!) and I've worked out a way of making scale-length BR1 bogies to go under them. I'd already made a set of master sideframes from cutting & shutting the Playcraft shorty BR1, but wasn't happy with the Worsley etched inners (rescaled from their TT3, I think, which means an odd/non-standard axle length) I'd already decided on using 12mm OO disc wheelsets as being close enough for 3'6" coach discs in H0. Having proved the concept with the trailing bogie on my Lincoln Locos 24/1, I've gone with a layered 80 thou plasticard inside-bearing core to which my cast resin sideframes can be attached. As Dounreay's passenger rakes are at most load 3, the friction inherent in the design shouldn't be an issue. Some good work there... Mk1 mk2 and mk3 bogies are available on several 3d stl sights just scale to fit Yeggi and cults3d 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted November 16, 2023 Author RMweb Premium Share Posted November 16, 2023 1 hour ago, bradfordbuffer said: Some good work there... Mk1 mk2 and mk3 bogies are available on several 3d stl sights just scale to fit Yeggi and cults3d Interesting and potentially useful. My only concern is when rescaling down to H0, what axle length would be required? 24.5mm pin-points is fairly standard in the scale. I'd respectfully point out that BR1s ride on 3ft6in wheels, which scales to 14mm in 4mm, rather than 12.6mm. In H0 I use 12mm disc wheels (slightly under diameter, but within the acceptable wear limits of the prototype). In any event, I have a few dozen of my resin BR1 sideframes still to use, plus a bunch of 80 thou plasticard, but thanks for the suggestion. I would probably be interested in Commonwealth bogies, if they are under consideration. 1 1 Link to post Share on other sites More sharing options...
bradfordbuffer Posted November 16, 2023 Share Posted November 16, 2023 45 minutes ago, CloggyDog said: Interesting and potentially useful. My only concern is when rescaling down to H0, what axle length would be required? 24.5mm pin-points is fairly standard in the scale. I'd respectfully point out that BR1s ride on 3ft6in wheels, which scales to 14mm in 4mm, rather than 12.6mm. In H0 I use 12mm disc wheels (slightly under diameter, but within the acceptable wear limits of the prototype). In any event, I have a few dozen of my resin BR1 sideframes still to use, plus a bunch of 80 thou plasticard, but thanks for the suggestion. I would probably be interested in Commonwealth bogies, if they are under consideration. When rescaled to Ho unlock unerversal scaling and widen width to suit There is a commonwealth on thingiverse I've printed to 3mm it would only be use as a cosmetic overlay as no hole for pinpoints and is very delicate.. https://www.thingiverse.com/thing:5994358 serch his designs Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted December 9, 2023 Author RMweb Premium Share Posted December 9, 2023 Aiming to have this LMS 50ft BG added to the fleet before Woolwich exhibition on Sunday. It's a cut & shut from a Rivarossi Third using Silhouette - cut sides. Decals, glazing and a light grotting to do. 8 1 Link to post Share on other sites More sharing options...
RMweb Premium CloggyDog Posted December 10, 2023 Author RMweb Premium Share Posted December 10, 2023 A very pleasant day at Woolwich exhibition, Liz line and the 244 played ball allowing me to get there and back with no problems. Still need to get decals for the 50ft BG, will get an order in to Railtec in a day or so (need the numbers for the VoR too) Dounreay's next outing is April 2024 at the Bentley MRG's show in Calne. 10 1 Link to post Share on other sites More sharing options...
Irish Padre Posted April 13 Share Posted April 13 What a little gem. Saw this at Calne show today. Most impressive. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now