RMweb Gold SHMD Posted January 3, 2021 RMweb Gold Share Posted January 3, 2021 In the south eastern corner of Lancashire is the small mill town of Mossley. The town is small but it had a LOT of Mills. Pretty much all gone now though. More recently, Ibex ropes once manufactured in what was left of the Britannia Mill, which was conveniently was, located next to the Britannia Inn. The hill on the left was in Yorkshire and the high ground on the right was in Derbyshire. My cakebox 2021 entry will feature Britannia Mill, Mossley Goods yard, the spur into Britannia Mill and Manchester Rd. The goods yard and spur will feature a wagon turn table and Manchester road will have the SHMD Tram track going along it. All surfaces will be cobbled or York Stoned, and all walls will be stonework. I am going to set this in 1920 (plus or minus a fudge or two). A really good source of info about the Britannia Mill can be found here: - https://library.oxfordarchaeology.com/2918/1/L10912_BritanniaMill_Mossley_FullRep.pdf and here: - https://mossleyheritage.org/trails/horses-tale/stops/6 Kev. 4 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 3, 2021 Author RMweb Gold Share Posted January 3, 2021 Yesterday, a went for a walk and accidentally managed to take some photos of the site. It answered a lot of questions but throw up some new ones too. It all seems very do-able in the giant wedding cakebox of 8ft by 6ft by 8ft that we have to play with. Here's some of the shots I took... Plenty of detail and inspiration there. What do you mean I have only got 8 inches by 6 inches by 8 inches to play with!!! This is going to be a squeeze then! Kev. 2 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 3, 2021 Author RMweb Gold Share Posted January 3, 2021 Having studied yesterdays photos, today I decided to go back, but this time with a tape measure! ( I also took some more photos.) I've always wondered why there was this disconnect in the wall on Manchester road. Now I know, it's the only remaining bit of Mossley Goods Shed. I plan to move this further south and onto scene in the cakebox but I'm going to have to guess what it looked like as I can find no photos of it. Kev. Kev. 1 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 3, 2021 Author RMweb Gold Share Posted January 3, 2021 The concept.. I'm going to move the Goods Shed gable end into the scene, the Wagon Turn Table is closer to the Tunnel entrance than it should be, and Manchester road is going to be narrower - but do-able I think. Some measurements.. (The 88" and the 120" values I have extrapolated off this photograph.) Kev. 2 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 4, 2021 Author RMweb Gold Share Posted January 4, 2021 I've started work! Kev. 6 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 6, 2021 Author RMweb Gold Share Posted January 6, 2021 I really must machine that first wall ( x2) but in the meantime I have been working on the main "blocky" retaining wall with the rail tunnel through it. I have at least three more layers to add to this before I will machine this to test the ideas out. Kev. 2 Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted January 6, 2021 RMweb Gold Share Posted January 6, 2021 Impressive work kev, looking forward to seeing this machined. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 6, 2021 Author RMweb Gold Share Posted January 6, 2021 ..and here's the Mill! OK, I can only use the top two floors, of five windows each, but this kit will save a tonne of time. These Mill kits are from JSModels:- (No connection other than being a very happy customer.) Phil Parker has even done a (very good) video on building and painting one of these kits. Most useful. The Wagon Turn Table is an (unusable) prototype I made for another project, so I'm going to use it here. I'm also using the large round Lego turntable brick, to mount my turntable on, as Lego is accurate, robust and available. Kev. 4 Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted January 6, 2021 RMweb Gold Share Posted January 6, 2021 Kevin those are lovely looking kits with some really nice details. It will look great on your cakebox challenge build even if it's just a small part of the model. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 7, 2021 Author RMweb Gold Share Posted January 7, 2021 Loads of stuff arrived in the post today, a couple of packets of cogs and stuff, and some Lego Technic stuff. The Lego, whilst convenient, is large, course and adds quite a load. Great fun though - can't deny that! So here is the a couple of "few quid's worth" packets of assorted/random gears/worms/bevels/cogs. Hmmm... I wonder what I could do here? OK, Plan A = Hand of God, Plan B = Fixed TT, Plan C = working TT, Plan D = Working TT that has seized solid! Kev. 2 2 Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted January 7, 2021 RMweb Gold Share Posted January 7, 2021 Kevin some interesting purchases, loads of ideas can be achieved with those cogs and gears. 1 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 9, 2021 Author RMweb Gold Share Posted January 9, 2021 More CAD plus some CAM. The CAD is quite involved... The CAM will take quite a while to machine, so... (I'm quite pleased with the effect though.) ...I'm going to redraw the CAD so that the machining is quicker, easier and neater to both draw and machine. One or two other changes will be made at the same time. Such as the post marks up the side of the arch. I have no idea when these gates/doors/slides appeared but I suspect they were much later than the 1920s. I also added another course of stone at the very bottom of the wall. I'm convinced that no Van would have ever fitted through the arch! Kev. 4 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted January 10, 2021 Author RMweb Gold Share Posted January 10, 2021 OK, CAD done, CAM done, tool bits sorted and tool paths arranged. Tomorrow I mount and cut. Kev. 3 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now