BrianB Posted June 16, 2010 Share Posted June 16, 2010 Im in Canada these days and needless to say A4 is hard to come by So far with the free model from scalescenes ive just about been able to get it printed on Letter size paper. But is there an easier way ive been missing? I certainly dont want it resizing to fit as that blows the scale. Link to post Share on other sites More sharing options...
Scalescenes Posted June 18, 2010 Share Posted June 18, 2010 Hi Brian Generally printing the A4 kits on to Letter works out OK as I always try to leave fairly generous margins at the top and bottom of the pages. If you find that a couple of small section do get cut off you should be able to print just that area again. Firstly zoom into the section that you wish to print and then select print. Once in the print window in the 'Print range' section, select 'Current view'. Please ensure that 'Page scaling - none' is also selected. If 'Fit to print margins' is enabled then the selected section will print out at the incorrect scale. Failing that if you do find one sheet isn't co-operating just send me an email and I'll just pop the element/s on to a Letter sheet. Happy modelling! John Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.