fitting snow ploughs

[class26]

Can anyone help ? I want to fit snow ploughs to a Bachmann class 37 and Heljan 26 but also fit Kadees. Its my understanding that the Kadee goes in the NEM slot but the central part of the snow plough (at least on the Bachmann 37) goes in this slot also. Can I fit both ? If yes, how ?

 

Many thanks

[Piemanlarger]

I dont think you can. Just fit the outer snow ploughs, bu even that may require gentle curves?

[kevpeo]

Can anyone help ? I want to fit snow ploughs to a Bachmann class 37 and Heljan 26 but also fit Kadees. Its my understanding that the Kadee goes in the NEM slot but the central part of the snow plough (at least on the Bachmann 37) goes in this slot also. Can I fit both ? If yes, how ?

 

Many thanks

 

It is possible!

It's not correct as the snowploughs swing with the bogie. But it will go round 23'' radius curves on Loch Dour.

Just chop off the centre plough above the cross member, add some extra bracing in the form of steel wire behind the ploughs and epoxy to the NEM box. In the case of the 37 just the centre piece needs doing. HTH, kev.

[class26]

Hi Kev,

 

Thats grwat , many thanks. I will have a go

 

Nigel

[ladysplicer]

It is possible!

If not correct as the snowploughs swing with the bogie. But it will go round 23'' radius curves on Loch Dour.

Just chop off the centre plough above the cross member, add some extra bracing in the form of steel wire behind the ploughs and epoxy to the NEM box. In the case of the 37 just the centre piece needs doing. HTH, kev.

 

A never thought of that im going to have a go as i always leave the middle bit off.

 

thanxs