mikeeyh Posted February 26, 2011 Share Posted February 26, 2011 Just wanted to say hello from newbie. Bought a Graham Farish Set last November and upgraded the train and controller to DCC and with in a few days I NEEDED more track, but was quite quickly kicked of the dinning table and sent to the loft. Unfortunally this meant the set getting put away for a few weeks as the loft needed tidying and more boards putting down, had the track setup on a borrowed table (so not able to paint it, drill it or shape it). So recently took a day of work and built a 90x200cm work bench to lay the track on. The two receses are for the controller and point switches (not going DCC with them yet), and so that I can have a bridge or viaduct with out the hassle of inclines. Pretty much decided (well this week) on the following layout I've transfered the track back onto the new board and roughly marked the board out for different secenary options, which should keep me busy for a while. Link to post Share on other sites More sharing options...
bobster Posted February 26, 2011 Share Posted February 26, 2011 Hi - Welcome Aboard - Good track plan. Cheers. Bob. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.