Window Frames

[LJC]

Have a large window to glaze, what is the best and quickest way to get window frames onto the glazing sheet.

 

Have a lot to do therefore individual pieces of card/wood is "out the window" as you would say.

 

Have heard of some kind of fine line paint pen, are they any good, IF who stocks them.

 

Cheers

 

LJC

[28XX]

Try this: http://www.rmweb.co.uk/community/index.php/topic/26297-glazing-bars-in-4mm/

[kandc_au]

And just to add to all the confusion,

I have been going through a lot of old Railway Modellers and there was an article in one about drawing them all out and printing them onto acetate or something similar.

DO NOT ask me which issue of RM as I do not remember....I've gone through that many in the last few days.

 

khris

[LJC]

Try this: http://www.rmweb.co.uk/community/index.php/topic/26297-glazing-bars-in-4mm/

 

 

Thanks for the help.

[The Stationmaster]

I claim no originality at all for this one but chatted to a chap using the technique at an exhibition last year. Take some ordinary white thread and run an even coating of neat pva along it then let it dry while hung vertically with a little weight at the bottom to keep it stretched out straight. He had got the idea from someone else but was using it very successfully on 2mm scale buildings.