simon1969 Posted May 21, 2011 Share Posted May 21, 2011 This is my proposed l shaped layout with a folded figure 8 with a difference and a heritage railway running from a bay platform at the station dimensions of layout are 10'x3' along one side and the rest of the L is planned to be varieing in width between 1' and 3' with a 4' long viaduct on the 1' wide section which will be removeable to allow access through the door overall length of this side will 12' the baseboards are on order and i am just in the process of rejigging my design the heritage line was origionally going to be a modern day rural branch line however my partner has shown an interest in modelling and put her twopence worth in so now we have extended in principle the base of the L with as said a removeable section to bridge the gap across where the french doors are, i enclose the first two mockup designs prior to this alteration so you can see the basic principle simon Link to post Share on other sites More sharing options...
simon1969 Posted May 21, 2011 Author Share Posted May 21, 2011 am currently looking for suggestions of a suspension bridge that is used by rail in the uk or could easily be adapted to be as this is what my partner has in her head she wishes to have for this layout Link to post Share on other sites More sharing options...
robrailltd Posted May 21, 2011 Share Posted May 21, 2011 Hornby suspension bridge ca be adapted for n-gauge. Link to post Share on other sites More sharing options...
simon1969 Posted May 21, 2011 Author Share Posted May 21, 2011 thanks for that it is even the ideal length for what i had in mind Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.