RMweb Premium steverabone Posted November 24, 2009 RMweb Premium Share Posted November 24, 2009 I have the latest Bachmann Peak - the split headcode version. The instructions state that you should remove the four large screws by the bogies and the two small ones near the ends. Even though I've done this I'm not able to remove the body. I've tried the usual tricks of slipping card strips down the sides of the body but there is no sign of movement at all. How do you remove the body/ Help please!! Link to post Share on other sites More sharing options...
Guest Max Stafford Posted November 24, 2009 Share Posted November 24, 2009 I'm just going out to the shed to work on one Steve. I'll have a look and get back to you! Dave. Link to post Share on other sites More sharing options...
RMweb Premium steverabone Posted November 24, 2009 Author RMweb Premium Share Posted November 24, 2009 I'm just going out to the shed to work on one Steve. I'll have a look and get back to you! Dave. I've discovered I'd removed the wrong screws! The correct ones are buried deep inside some holes and I'd removed the ones that are visible by the side of the bogies. Stephen Link to post Share on other sites More sharing options...
Guest Max Stafford Posted November 24, 2009 Share Posted November 24, 2009 Did you catch the little ones right on the nose end behind the buffer beam too Steve? Dave. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.