JohnBS Posted February 20, 2013 Share Posted February 20, 2013 Hi all, I have posted more details of this on the 2mm finescale forum but thought that a summary would also be useful here A rendering of the 3D model, produced in Solidworks The printing, by Shapeways in FUD, straight out of the box Cleaned up a bit and dusted with grey primer - still a bit more sanding to do I intend to produce a 3D version of a 3,500 gallon tender to go with this. Then move on to make the chassis (traditional 2mm SA split frame with a tender-mounted motor and cardan shaft drive). Check the 2mm finescale forum for progress. John Link to post Share on other sites More sharing options...
5D_Stoke Posted February 21, 2013 Share Posted February 21, 2013 This Saint looks divine, especially impressed by the front end rivet detail you've achieved in 2mm scale. Looking forward to seeing your progress Mark (5D_Stoke) Link to post Share on other sites More sharing options...
JohnBS Posted April 29, 2013 Author Share Posted April 29, 2013 Hi all, The production versions of the Saint loco superstructure and the 3,500 gallon Churchward tender (two versions, with and without space for motor) in 2mm FS are now available from Shapeways - see http://www.shapeways...ops/SteamPrint N-gauge versions will be available soon. Also see GWR Saint thread in 2 mm finescale section. John Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.