sub39h Posted April 11, 2013 Share Posted April 11, 2013 Hi guys, I'm wanting to replace the wheels on my Mk4 carriages for metal ones. Which ones are right? I can't find any sources telling me the right diameter (for the model or the prototype so I can work it out myself). I would just measure my own carriages but they're all in storage. Thanks for the help! Link to post Share on other sites More sharing options...
deltic79 Posted April 11, 2013 Share Posted April 11, 2013 I think you'll need 14mm disc wheels but stand to be corrected. Hornby do a pack of these, R8218. They also do R8264 which are 2 hole coach wheels but someone else on here more knowledgeable than me would need to tell you whether these are more appropriate or, indeed, what coaches they were used on. Link to post Share on other sites More sharing options...
naugytrax Posted April 11, 2013 Share Posted April 11, 2013 British passenger cars from the late BR Mk 2 onwards have 3'0'' diameter wheels. The correct size in OO scale is 12mm. Holes on carriage wheels are not very noticable. Just be sure to avoid the 12mm wheels (Hornby says they are 12.5mm) which have 3 large holes - they are only suitable for freight wagons. In the Hornby range I would go for R8096. Link to post Share on other sites More sharing options...
sub39h Posted April 11, 2013 Author Share Posted April 11, 2013 That's perfect, thank you! Link to post Share on other sites More sharing options...
lyneux Posted April 11, 2013 Share Posted April 11, 2013 From the drawings in the diagram book, they look to be 3ft. So 12mm is good for 4mm scale. For a cheap replacement, try Hornby R8096 (or something better if you prefer). Link to post Share on other sites More sharing options...
sub39h Posted April 14, 2013 Author Share Posted April 14, 2013 Nope Hornby R8096 is perfect. I was in ModelZone with some in my hand and wasn't sure so put them back. Now I'm certain I'll go back and get some. Thanks everyone Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.