Jump to content
 

Madison Paper Industries - Guilford customer in Maine


Recommended Posts

Another interesting location I came across while searching Guilford pictures.  This is a location that would make a good subject for a small layout or as a customer on a large® layout.  Near as I can tell from the aerial imagery of Madison, Maine, this papermill has three tracks that enter this particular building/warehouse.  A pair of tracks enter one corner of the building while a third track runs parallel to this portion of the building before entering further down.  I don't have a lot of info on this place so I am assuming at this time that this is a warehouse where finished paper rolls are loaded for shipment.  If that assumption is correct, then your primary traffic will be inbound empty paper service boxcars.  I think you could pull this off in a compressed form in a 1'x6' board although I would probably consider something 15"-18" deep and closer to 8' in length if I were building this for myself.  One other item that might appeal to some of you; it appears that this is the end of a branch giving you the chance to have a train come into view, shuffle loads and empties, and then head back the way it appears.  Here's the pictures.

 

 

http://www.railpictures.net/viewphoto.php?id=83002&nseq=8

http://www.railpictures.net/viewphoto.php?id=83004&nseq=7

 

 

http://maineanencyclopedia.com/wp-content/uploads/madiso02x.jpg

 

 

Article on sale of mills parent company.  Nice view of old mill from across the river.

 

http://www.onlinesentinel.com/news/madison-papers-parent-company-sold_2010-12-22.html

 

 

Somewhat fuzzy aerial from Bing Maps.  Wish this were clearer but I think you can probably get a good idea of the location from this.  There is more of the mill to the left along the river but this warehouse portion struck me as a section that would be fairly easy to model although it admittedly will lack some of the freight car variety that the main mill will have.

 

http://www.bing.com/maps/?v=2&cp=rfzdxp958nsm&lvl=18&dir=270&sty=o&q=Perkins%20St%20%26%20Pine%20St%2C%20Madison%2C%20ME%2004950&form=LMLTCC

 

 

Wish I knew more about this mill or could find more ground level pictures.  Hopefully someone else will have something to add.

 

 

Jason Cook

 

 

 

Link to post
Share on other sites

There's an industry further up the line to the north which appears to have the headshunt to the run around loop serving it on a bridge over the river. A rather interesting Street View shot can be seen at the following coordinates: 44.855002,-69.902327

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...