Axlebox Posted June 29, 2014 Share Posted June 29, 2014 Evening All Anyone know where I can get my hands on a drawing of a BR Eastern Region (GN section pref) relay box as per this one at Lincoln... http://www.roscalen.com/signals/Lincoln/BoulthamJct.htm (scroll to bottom of the page) thanks in advance Duncan PS I've just assumed they're called 'relay boxes' please feel free to correct/chastise! Link to post Share on other sites More sharing options...
LNERGE Posted June 30, 2014 Share Posted June 30, 2014 You can have all i've got on these a bit later on. It wont be much use to you but it may help. Link to post Share on other sites More sharing options...
LNERGE Posted June 30, 2014 Share Posted June 30, 2014 As i said earlier not a lot of use but you can see what the LNER called them. I suggest the one in the picture is an E type apparatus cupboard. Link to post Share on other sites More sharing options...
Axlebox Posted June 30, 2014 Author Share Posted June 30, 2014 As i said earlier not a lot of use but you can see what the LNER called them. I suggest the one in the picture is an E type apparatus cupboard. Its a start...and I can probably scale things up from the size of a standard battery... Thanks Duncan Link to post Share on other sites More sharing options...
LNERGE Posted June 30, 2014 Share Posted June 30, 2014 I do have some i can measure if needed. An E and F for sure plus a telephone cupboard. Link to post Share on other sites More sharing options...
Axlebox Posted July 1, 2014 Author Share Posted July 1, 2014 I do have some i can measure if needed. An E and F for sure plus a telephone cupboard. Yes please...anything with some dimensions on...I've got 3 to make in all, an E/F sized cabinet and then 2 roughly sized D. Thanks in advance Duncan Link to post Share on other sites More sharing options...
LNERGE Posted July 2, 2014 Share Posted July 2, 2014 Yes please...anything with some dimensions on...I've got 3 to make in all, an E/F sized cabinet and then 2 roughly sized D. Thanks in advance Duncan It'll be this evening as i'm stuck in the orifice for the day. Link to post Share on other sites More sharing options...
LNERGE Posted July 2, 2014 Share Posted July 2, 2014 I ran out of time tonight, domestic duties etc. I do have this on file though.. Link to post Share on other sites More sharing options...
LNERGE Posted July 3, 2014 Share Posted July 3, 2014 The F type is 7 inches deep, 36 inches tall at the front and 35 at the back. Both the E and F type are 17 inches wide. The E type is 12 inches deep, 36 inches high at the front and 34 ant the back. I do have a C type also. Most of these i've seen were made at Leyton shops. I think they were quite proud of them... Link to post Share on other sites More sharing options...
Axlebox Posted July 3, 2014 Author Share Posted July 3, 2014 ...thank you for the time and trouble you've taken digging both drawings out... I should have enough to make a reasonable stab at making the cabinets...all I need to do now is get on with them! Just seen the pic...with yet more dimensions!!! Link to post Share on other sites More sharing options...
LNERGE Posted July 3, 2014 Share Posted July 3, 2014 Good luck with models. I have to do some repairs to a couple of mine this summer. Steel is so much easier.. F type and signal post telephone cupboard.. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.