sub39h Posted July 10, 2014 Share Posted July 10, 2014 Hi guys, I purchased a pack of these recently to compliment some of the other Dogfish wagons I have. Starting to form an impressive rake now! 4095 comes with loads. Does anyone know if there is any way to remove these loads? I presumed they'd be removable but they seem firmly stuck in! Thanks in advance. Link to post Share on other sites More sharing options...
rembrow Posted July 11, 2014 Share Posted July 11, 2014 Hi sub39h The loads modelled in the Dogfish set 4095 (and also in set 4096) have been glued in place, but in both my sets the glue has only been applied at the 2 ends and appears to be a liquid solvent. The loads are only about 1.5mm in the thickness of the flat edges that push into the body and I've successfully removed mine by pushing a craft knife between the body and the load at one of the ends and carefully prising upwards. Hope that helps. Link to post Share on other sites More sharing options...
sub39h Posted July 11, 2014 Author Share Posted July 11, 2014 Perfect, thanks. 3 Came out easily. 1 of them is putting up a real fight! I think this one might be glued on all 4 sides. The others as you say were glued on the two ends. Edit - the last one was glued on all 4 sides. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.