gjhimages Posted July 31, 2014 Share Posted July 31, 2014 I have a Hornby select, it does not read CV,s if I bought a sprog 2 to set values how does you then set select unit? Link to post Share on other sites More sharing options...
Nigelcliffe Posted August 1, 2014 Share Posted August 1, 2014 There is nothing to set in the Select (or any other DCC system). The Sprog will setup CV values on your locos, you then use the locos on the Select. Do NOT attempt to connect the Select and Sprog to the same piece of track; at best nothing will work and at worst you will damage one or both devices. Only significant issue is that you use Loco Addresses with the Sprog that are also allowed by the Select; a Select can only address a very small range of loco number (1 to 59 (or 60)), whereas the Sprog can create and use addresses 1 to 9999. So, you need to set the addresses with the Sprog to be in the range which the Select can use. Link to post Share on other sites More sharing options...
gjhimages Posted August 1, 2014 Author Share Posted August 1, 2014 Thanks for the info I have ordered a sprog 2 Gary Link to post Share on other sites More sharing options...
Bilbo Posted August 1, 2014 Share Posted August 1, 2014 You won't be disappointed it's great. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.