Jump to content
 

West German un-named layout (formerly Project Calderfoot)


townend91

Recommended Posts

Hey,

While Attention is Now being made on Halifax MRC's acton-parkway-oo, Which I'm due to update in Due Course (Due to Work Constraints).
In between the time i do have to myself, I have tried and Failed numerous times to build a layout, and deciding against it, But this time I will not Fail!.


I've Know The Beams are abit big, but you can't turn down Off Cuts at B&Q.


Right Off to Work Now Enjoy the Weekend :)
Matt

Link to post
Share on other sites

Heard and seen People using Foam sheets on layouts as a cheaper alternative to cork, had mine delivered today.

post-21016-0-52152500-1438597228_thumb.jpg

 

Been looking at my plan and wondering do I keep it in a British Location or shall I go more Continental......

 

Well with another Swiss layout in the pipeline it could help broaden my Horizon :)

 

Matt

Link to post
Share on other sites

Finalized the Plan..

post-21016-0-75095700-1438942005_thumb.jpg

 

The use of Setrack and Streamline For the Traction Maintenance Depot, Which will now be set in Europe (Can't stop looking at that stock now) on the Swiss Frontier, Which will host a variety of Stock from different Regions, DB, SBB, BLS, SNCF, OBB (and anything else I feel silly buying).

 

Matthew

Link to post
Share on other sites

  • RMweb Gold

Finalized the Plan..

attachicon.gifTMD.jpg

 

The use of Setrack and Streamline For the Traction Maintenance Depot, Which will now be set in Europe (Can't stop looking at that stock now) on the Swiss Frontier, Which will host a variety of Stock from different Regions, DB, SBB, BLS, SNCF, OBB (and anything else I feel silly buying).

 

Matthew

 

Careful with the SNCF locos unless they are diesels. Not many SNCF electrics equipped for 15kV.

Link to post
Share on other sites

Agreed!

In fact, is it just the class BB37xxx that are so fitted along with some TGV's? Which I assume, would be too long for this layout!

Having said that, I'm always keen as mustard to see others work with regards to continental stock so looking forward to seeing this develop.

Good on you!

Cheers,

John E.

Link to post
Share on other sites

Agreed!

In fact, is it just the class BB37xxx that are so fitted along with some TGV's? Which I assume, would be too long for this layout!

Having said that, I'm always keen as mustard to see others work with regards to continental stock so looking forward to seeing this develop.

Good on you!

Cheers,

John E.

There were also the BB20200s, though these might have gone by now.

Link to post
Share on other sites

  • 2 weeks later...

Trackwork is Progressing, Plan has changed alittle bit to save money to accomadate a Electric Depot and a light maintenance shed and storage for wagons and other vehicles.

post-21016-0-23920000-1440501609_thumb.jpg

 

Storage Yard

post-21016-0-40555300-1440501611_thumb.jpg

 

Veiw from Portal

post-21016-0-49927100-1440501613_thumb.jpg

 

Trackwork should be completed mid september.

 

Matt

Link to post
Share on other sites

Ooops,

 

I've Ended up with another project to do....

 

Still Sticking with the European theme.

 

But as you can see.. Not a TMD (Different Board)

post-21016-0-19484300-1441051547_thumb.jpg

 

 

The TMD will be in Temporary Storage - hopefully not long.

 

Matt

Link to post
Share on other sites

  • 1 month later...

After a short spell of tending to other layouts, i'm back with my own.

 

Decided to Go West Germany with it too the Late Steam Period, Still plenty of research to be had, making sure I have the right sort of stock.

 

post-21016-0-28270300-1443955637_thumb.jpg

 

 

Not the Stock i'm "Aiming" for... (Panic Purchase)

post-21016-0-59814200-1443955639_thumb.jpg

 

 

Station Building Is yet to be made, maybe something to do this week between shifts..

 

Until Next time...

 

Matthew

Link to post
Share on other sites

  • 2 weeks later...

Halifax Model Railway Club

OPEN DAY - THIS SUNDAY!!!

LOCATION: The Clubrooms, 5 Deal Street, Halifax, West Yorkshire, HX1 1QX
DATE : 18th October 2015
TIMES: 10.00am until 4.00pm

Why not come along and see what we get up to and chat to the members about any aspect of the club, you never know you could become hooked and end up joining us.

Link to post
Share on other sites

  • 2 weeks later...

Abit of absence since last updated, but there has been changes.

West German layout with a Cold war feel to it, but as it fictional I can do what I want... even if something does look abit out of place in the picture.

So far I've built a Good Shed(needs detailing) and started building the station building, placement if this structure was a real pain so instead I've put it at the end of the platform which gives it an impression that it was a bigger station.. in time the imagination with erupt in to better thoughts.

(Taken with tablet)

post-21016-0-97764100-1445857819_thumb.jpg

Matthew

Link to post
Share on other sites

  • 1 month later...

Since last update.

 

The Station building has been built,  slight modification to the line second from the back (runs alongside main roads).

 

Purchased a Roco Multimaus System for Christmas, this will be fun to set up, with the layout haha.

 

~Pictures will follow in due course.

 

Matthew

Link to post
Share on other sites

  • 2 weeks later...

Hope everyone had a great Christmas.

A little readjustment to one of the sidings, meaning I can use both sides of the Goods Shed.

post-21016-0-44671600-1451487931_thumb.jpg

 

Using both Auhagen portal's to assist in creation of a raised level.

post-21016-0-82724200-1451487940_thumb.jpg

 

Overall look of the Station area.

post-21016-0-39206400-1451487937_thumb.jpg

 

Matthew.

 

Happy New Year :)

Link to post
Share on other sites

  • 3 months later...

...............3 Months Later:

 

Been a abit of Progress since New Year, Well The rolling stock list has grown abit more, unlike the layout.

 

Now

 

Spent the laste two weekends playing with Prieser Walling Kits (very Good), Decided to get a Lokschuppen (Engine Shed).

 

Raised Area using Fromentioned Prieser Kits

post-21016-0-35821800-1459701141_thumb.jpg

 

Another look but on the layout, including another section used with spare bits (note; Im not burying a BR23 hahaha)

post-21016-0-11325600-1459701139_thumb.jpg

 

Lokschuppen (just fits a BR57, on that note, when one purchases a BR44 theres nowhere to hide it :( )

post-21016-0-58089200-1459701136_thumb.jpg

 

Overall Area on the Schuppen's (Time for some card shopping )

post-21016-0-54123700-1459701133_thumb.jpg

 

And to finish off this post, A simple purchase from York Show.

post-21016-0-25356900-1459701617_thumb.jpg

 

Matthew

Link to post
Share on other sites

  • 3 weeks later...

Location plan, Is now set around Northern Germany, Considering that most Stock carry either Hamburg or Koln (Cologne) on their chassis and the inclusion of Retaining walls appearing, Gives it a slight Urban Feeling.

 

My Recent Purchase has now been Attached the Layout, No exactly in the centre, but in a position that it doesnt portrude the viewing area

post-21016-0-87047400-1461522295_thumb.jpg

 

Thought why not get the Modern stock out for a run for a change, they don't see much action.

post-21016-0-53484500-1461522250_thumb.jpg

 

185 just fits haha.

post-21016-0-05517000-1461522246_thumb.jpg

 

Layout does look dark at the moment, due to relocation of Former baseboard (Which has a set of 3 ways on "wink wink")

 

Promise another update within 2 weeks time, When I get my 94 back.

 

 

 

 

 

 

 

 

 

Still need to sort out a fiddle yard, But Ebay is evil...

Link to post
Share on other sites

  • 2 weeks later...

Morning all

 

Busy Bank holiday With Halifax's Acton Parkway at Bradford (Cleckheaton) Show and a Visit to the Tramway Museum at Crich (plenty of drink)

 

With the few hours spare last night I thought why not build a bridge.

 

I'm pleased with the results.

post-21016-0-64022200-1462268987_thumb.jpg

DR 94 Posing while Entering the area with a "Good WillTrain from the Iron Curtain"

post-21016-0-43756700-1462268985_thumb.jpg

 

Matthew

Link to post
Share on other sites

  • 3 weeks later...

I've decided to go with the dark art of Electrification,

~Only the Station area - Not as complicated, although speaking of "complicated" I've chosen to go with using Sommerfeldt OHLE.

Placement on the Pylons isn't a problem, Its the rest of it :)

 

BR185 helping with Gauging - although I've got slightly taller Pylons on order for the Junctions the two shown will be placed at the ends on sections for the tensioners.

post-21016-0-91256000-1464081951_thumb.jpg

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...