cheekychops
-
Posts
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Posts posted by cheekychops
-
-
Thanks, I have had a look and can see that the premium range might be better. I have managed to seal it with Halfords Matt Lacquer. What to do spend more money. I am not keen on self-adhesive/non-aqueous glues so I might go ahead with the current standard grade and coat it. Not really impressed with this product, it should be water-fast whatever the grade!
D
-
I did a small experiment with Halfords Matt Lacquer and it did provide protection against a 'wet finger swipe' after only one coat. I'm surprised no one has found this an issue this as a backscene blemish is easily noticed.
-
Hi
I have noticed that the ID Backscene I have is easily blemish with water and/or slight abrasion when damp. Any ideas on protecting this against? Dullcote? Matt lacquer?
Many thanks
-
Thanks ColHut - Ill look into these!
-
I wish to add to my layout an oil depot using PECO's Oil Depot 530 Kit. This would allow for the transfer of oil from tankers to road vehicles for delivery to domestic users in the rural area I am modelling (Suffolk, 1950-70). However I am unsure as to
- Do you need a pumping house as in the PECO 529 Oil Depot kit?
- How is the Oil Depot 530 Kit positioned with respect to the rail tracks. Are there any prototypical pictures of such installations?
Many thanks in advance.
-
And Bachmann has replied!
Thank you for your recent e-mail, unfortunately, we are unable to supply the coupling rods as a separate part they come pre-fitted to the wheelset. We can supply a wheelset for £21.00 in UK PPH.
-
I have also noticed the back wheel pair (0-6-0) can be 'adjusted' or independently turned, so the quartering might be off. Does anyone know where to obtain a small spanner or tool for the coupling rod bolts?
-
Thanks! Yes, I agree, I haven't taken apart coupling rods being a diesel/electric person. Hopefully, Bachmann will reply to the email I just sent them requesting spare parts.
-
-
Thanks for the ideas! I have ordered two MBRmodel Bartosz i Maciej Radke Sp.j. firs, being quite a bit less expensive than those Model Scene.
Regards!
-
Sorry, looking for commercial options due to time constraints.
-
Recommend a robust plug..
in Electrics (non-DCC)
Posted
Can anyone suggest a robust plug to carry the DCC bus between and to boards.
In more detail. I have the simple NCE 'starter' DCC control. I have 4 boards: 2 scenic, 1 cassette and 1 storage sidings. I need to connect from the floor where the NCE unit will be positioned to the each board separately (when the layout is in not fully assembled) and between boards (when exhibiting). I have used computer type connectors (MAPLIN) and found them ineffective for frequent assembly/disassembly. I am not sure how robust DIN PLUGS are?
Should I use a 4+ pin variety to take a low voltage DC supply for accessories, lighting?
Please also recommend a supplier?
Many thanks