josephmarsh

Thanks for your reply, however this does not help me build the kit, yes i'm hanging by a thread! but I'm still hanging!

Thanks for the info. Though to clarify, I bought a Judith Edge Kit, this was brand new, though the instructions went along the lines of part 6 to part 12 and sub assembly with part 19. "If you get me" Yes most of the part have a number on the copper sheet, if you can see what it says. This is a well made kit but the instructions are way over my head, "NO EXPLODED VIEW" ala AIRFIX. With no experience building kits like this, I will have to resort to someone more skilled than me. The kit comes with all parts to build except, wheels, pickups, buffers and motor. I have a motor that may do the job, and wheels from a Hornby 040 steam shunter that will do fine. Looking at the parts, i'm just looking at a jigsaw with no reference picture to work from ie"pieces in a bag with no box or artwork" Yes I have some pictures of the part built kit from J.Edge and pictures of the real engine, but it's over my head

Thanks for your reply, If I can't get someone to build it then it will stay in the box, my hands wont keep still long enough to solder the parts if I could find out where they go. I know some one that could paint if for me but they don't have the skill to put it together, "Thats how far they got" really just part of the chassis. If anyone would like to contact me, I did include my email address in the last message, I usually can't find replys like this as I don't know where or when to look, Just luck I found this. Thanks for your help. Regards Joseph Marsh

Could someone pass this on to Tony Wright please! Hi, New to this and not sure how to reach you. I bought a metal kit of an engine that ran at Round Oak Steel Works in the late 60s. I'm getting nowhere building it and after getting no reply from a local model club i'm stuck. Seeing your Right Track dvds and then today seeing you show what you'd been doing during lockdown I wondered if you could help and at what cost. The engine is a Judith Edge Kit of a Yorkshire Engine DE2 040 diesel, please see pictures. If i sent the kit to you could you build and paint it ready for a DCC chip, I have a motor, though you would probably know of a better item. Yes I know what i'm asking you to do, but after paying £50 for a box of bits, It's just sitting there doing nothing. Parts of the main body, chassis and cab have been soldered together, I just cant work out what part is what and don't have the skill to do anything else. The pictures are of the kit built by Judith Edge, I only built part of the chassis sub frame, second picture is it finished and 3rd is real engine at R O Steel works Please give me some idea of the cost. Kindest regards Joseph Marsh56@gmail.com

Could someone pass this on to Tony Wright please! Hi, New to this and not sure how to reach you. I bought a metal kit of an engine that ran at Round Oak Steel Works in the late 60s. I'm getting nowhere building it and after getting no reply from a local model club i'm stuck. Seeing your Right Track dvds and then today seeing you show what you'd been doing during lockdown I wondered if you could help and at what cost. The engine is a Judith Edge Kit of a Yorkshire Engine DE2 040 diesel, please see pictures. If i sent the kit to you could you build and paint it ready for a DCC chip, I have a motor, though you would probably know of a better item. Yes I know what i'm asking you to do, but after paying £50 for a box of bits, It's just sitting there doing nothing. Parts of the main body, chassis and cab have been soldered together, I just cant work out what part is what and don't have the skill to do anything else. The pictures are of the kit built by Judith Edge, I only built part of the chassis sub frame, second picture is it finished and 3rd is real engine at R O Steel works Please give me some idea of the cost. Kindest regards Joseph Marsh56@gmail.com

Could someone pass this on to Tony Wright please! Hi, New to this and not sure how to reach you. I bought a metal kit of an engine that ran at Round Oak Steel Works in the late 60s. I'm getting nowhere building it and after getting no reply from a local model club i'm stuck. Seeing your Right Track dvds and then today seeing you show what you'd been doing during lockdown I wondered if you could help and at what cost. The engine is a Judith Edge Kit of a Yorkshire Engine DE2 060 diesel, please see pictures. If i sent the kit to you could you build and paint it ready for a DCC chip, I have a motor, though you would probably know of a better item. Yes I know what i'm asking you to do, but after paying £50 for a box of bits, It's just sitting there doing nothing. Parts of the main body, chassis and cab have been soldered together, I just cant work out what part is what and don't have the skill to do anything else. The pictures are of the kit built by Judith Edge, I only built part of the chassis sub frame, second picture is it finished and 3rd is real engine at R O Steel works Please give me some idea of the cost. Kindest regards Joseph Marsh

Thanks, not sure i could make a kit so would really like one already built etc.

Hi, I used to live in Pensnett, "Round Oak to Bagrage line", one of these used to travel past my garden every day, I WANT AN OO GUAGE MODEL of this, ""bee stripes on cab as well" can you supply or tell me who could. PLEASE Hi, I used to live in Pensnett, "Round Oak to Bagrage line", one of these used to travel past my garden every day, I WANT AN OO GUAGE MODEL of this, ""bee stripes on cab as well" can you supply or tell me who could. PLEASE