DLIBOD17

Fox transfers to the rescue for one of the Farewell headboards.

The winged thistle one they’ve produced for a while…..

Dear 37114,

Looking at the grilles I’d say the radiator grilles are separate items. They fit very tightly but I reckon they’re not part of the main body moulding.

I was intending resisting the new batch of Deltics but having seen images of them succumbed. I’ve corrected the eth cables on 55022 & painted them black. As regards 55015 I’ve blinged this up & added Railtec 3D Rainhill plaques to the headcode panels. Both models have been further enhanced with Protoneo self adhesive etched nameplates which match exactly the size of the factory applied nameplates. Would be great if somebody was to produce Deltic Farewell headboards in 0 ! 

16 minutes ago, GBRf 66 The Flying Dustman said:

 Very nice you need to remove the centre section of the plough on 37 610 as it doesn’t have it in real life .

I had noticed that from images. Must help the poor shunters in real life but decided to fit mine in the 00 world 👍🏻

…

The bufferbeam pipes make such a difference to the finished appearance ………

Received my 37051 model today & very pleasing it is too. I had to refix two items of loose glazing but as the body comes off very easily the task wasn’t daunting at all. The redesigned bogie chain fixing helped too as I’d accidentally dislodged one. The shape, the detailing & the finish are all up to Accurascale’s usual standard. I’m very impressed how easily the bufferbeam pipework slots into their respective apertures. No filing to remove excess plastic or thick paint was required. Looking forward to several more other versions when they arrive.

2 minutes ago, Alan Oliver said:

I used T Cut on my 144011 certainly looks a lot better now.

Did the transfers all survive intact ? Lighter rubbing across those & the windows ? The yellow ends are far too dirty. Thankyou 

If one was to remove the weathering from the EFE 144’s what would be the best method please ? The factory weathering is a little heavy for my liking. Many Thanks.

Apologies but I’ve not run mine yet.

No sandboxes in the box. I’m hoping that Rails of Sheffield will receive some for onward transmission to purchasers. Just hope that they are weathered to match the bogies.

Very impressed with my 27032. The factory weathering is certainly getting even better than some previous models. The instructions for affixing the snowploughs are incorrect & for a different design for fixing.

Now on their way to the UK apparently…..

On 19/12/2022 at 15:25, scouse889 said:

No real surprise there then!

I messaged Hornby spares requesting a pair of their black plastic drawhooks at least & was told that those items weren’t part of the original moulding & therefore couldn’t be supplied as spares.

Good job I had some Accurascale screw links handy.

Luckily my models are for static display only.

Somebody previously mentioned the basic moulded drawhook/screw link coupling so I replaced mine with a grey spray painted Accurascale product ……

Pretty impressed with my 45033. The lifting points are a pain to handle with tweezers & I half expected them plus the draw hook & screw link couplings not to be weathered to match the rest of the loco. A nice model though.

The instruction sheet doesn’t illustrate the correct eth provision when compared to images of the actual loco.

I used images to locate the various components …..

Just noticed that Silver Tay Models produce the 1977 Silver Jubilee headboard ….

& finally last but by now means least …

Plus these …

Steve at Grimy Times has weaved his magic on these …

On 09/07/2022 at 15:35, Tiddles47 said:

Question for those who have the DPS ltd ed of D9009… has anyone tried to put on the ETH connection on the buffer beam  when adding the detail?  I cant seem to see any place for them to go… @Accurascale Fran any ideas? 

 

EDIT: tried it with them on but the wire hangs too low and scrapes the rail and restricts the movement of the bogie. However a snip of the cable but leaving the eth connection boxes on solves the problem.  Hope this helps anyone. 

:) 

 Alycidon’s unique eth equipment location ……

43 minutes ago, Legend said:

 

Nice . Might I enquire where you got headboards?

 Hi - it’s a Fox Transfers product 👍🏻

Had to reattach a bogie chain after a neighbour’s daughter picked the model up roughly !! I wasn’t a happy bunny !!