Jump to content
 

NScaleNotes

Members
 View Profile  See their activity

  • Posts

    64

  • Joined

  • Last visited

 Content Type 

Blog Entries posted by NScaleNotes

  1. NScaleNotes
    I promised an update so here is the work I've completed so far.
    Interestingly I find I'm using the blog posting process to overcome any procrastination to force myself to make progress on this module.
     
    Knowing that the area I wanted to recreate would fit on a T-Trak module I thought the best place to start would be with the roads and pavements. The Stadtbahn itself runs right across the middle of the board and laying the roads/pavements would help me make a more accurate guess at the span of the bridge that is the centrepiece of the module; I'd also have a much better idea how much space I'd have available for buildings.
     
    I know that an N scale T-Trak module represents a real-World area of about 50m x 57m. Using the scale built into the maps and images of the Universitätsstraße area I drew a box this size over the area I wanted to model. This locks in the area I'm modelling and gives me edges to measure from. Using the same ratios, I then calculated the width of the roads and pavements.
     
    First I figured out the width of the pavements in various parts of the scene and cut these from white styrene. I debated for a little while whether I should try and replicate the various pavement surfaces (cobbles/square paving/diamond paving) by scribing the surface of the plastic but I think whatever I attempt might look over-scale. Perhaps I'll come back to this later.
     
    I then figured the width of the roads. I decided to use grey card (the kind you find on the back of pads of paper) for the road surface. It's not completely smooth (that didn't look quite right) and has just enough surface texture without looking over-scale. I'm hoping the lip created by laying the pavements on top of the road will allow the buildings to sit behind/inside the lip help hide any gaps that might be present at the bottom of the buildings.
    Here's a picture of the first card roads:
     

     
    As you can see I hadn't quite finished laying all the road and my excitement at the progress and how it was already looking made me jump ahead to the next stage, the tram tracks.
     
    A tram track runs parallel with the Stadtbahn across the centre of the scene. I debated for a while whether I should try and use Kato TramTrak or even scratchbuild some tracks but decided this might give me reason to put the project on hold so went for the option of creating non-working tram tracks instead. If I made them correctly there was no reason why a static model couldn't sit on the tracks later.
     
    I calculated where the outer tram tracks ran in relation to the edge of the road and cut the surface of the road in half at this point. I then removed 9mm from the edge of the inner piece of road. I used 0.5mm x 0.5mm styrene strip to represent the rails and 0.25mm x 0.75mm styrene strip to represent the inner 'check rails'?
    I glued the roads and rails down with tacky PVA glue. being careful to maintain a consistent gap between the rails and 'check rails'.
     


     
    I might add a second piece of styrene to the rails to make them a bit higher as they are currently slightly below the surface of the road.
     
    I haven't yet glued down the pavements but here's a final shot of the scene as it stands now from the kind of perspective I hope the module will be viewed from:
     

     
    Next steps, finish laying the road and glue everything down.
     
    In the meantime I've also started drawing plans for the first building:

     
    Until next time.
     
    Simon
     
  2. NScaleNotes
    Wow, doesn't time fly?

     
    Back in January I wrote my first post about how I built a light-weight and relatively cheap T-Trak module using Gatorboard. Since then almost three months have passed but in that time I've finally decided what to model and have actually made a start.

     
    So what did I chose to build on my first module?
    After weeks of deliberation, trying to decide whether to create a river bridge scene, a US rail-served industrial building, a city scene or a road bridge, I can now announce the winning idea is a Berlin Stadtbahn scene.
     
    More specifically, I've chosen to model this view down Universitätsstraße.
     
    It’s going to be quite a project but I like to throw myself in the deep-end.  
    I’ve always wanted to create a European city scene having been inspired by the Cross Street layout of David Lund, the exhibition layout Schwungischerplatz and the scratch-built card and plastic building models of Grahame here on RMWeb.
     
    I have to admit it won’t be a prototypical model as I’ll be taking some liberties with the buildings in the scene. The coffee shop on the right is staying but I’ve found another building I want to put in the foreground on the left and also on either side of the road behind the tracks.
     
    Here’s a map of the scene with T-Trak module sized overlays; Universitätsstraße is on the right:
     

     
    I’ve transferred a rough plan to the surface of the Gatorboard and can confirm everything I want to include fits on the module.
     
    I’m currently creating scale drawings of the roads, pavements and buildings before I start cutting and assembling.
    Watch this space for progress reports and photographs…

  3. NScaleNotes
    Hello
     
    I've been blogging about real-World locations that might make good modules or cameos on my own website for a while now and I've recently become very interested in building T-Trak modules.
    In a nutshell, T-Trak is a set of standards for building very small modules. The standard ‘single’ module is only 308mm wide and 355mm deep. If you model in N scale like I do this means that a ‘single’ module represents about 50m x 57m of the real World. You can find out more about T-Trak here: http://www.t-trak.org/
     
    As it's winter and I lack workshop space I need to be able to build the modules inside the house with simple tools using a strong, light material.
    Using foamcore board seemed like a solution. Tho only thing is I've built experimental formboard modules/layouts in the past using the kind of foamcore that can be found in the average hobby or art store but I've never been completely satisfied with the results. They tended to warp when damp/wet and the material never seemed as strong as advocates of the method made out.
    Then I got my hands on some Gatorboard...
     
    Gator Board is a heavy-duty foam board. The surface of Gator Board is made from wood pulp mixed with a fibreglass plastic and is advertised as being much tougher than regular foam board. The foam used between the surfaces also seemed to be denser than regular foam board.
    Now I've put a module together using it I can confirm that Gator Board is definitely much tougher than regular foam board!
    In the past I've cut foam board cleanly with a couple of passes of a scalpel but a scalpel barely scratched the surface of Gator Board. Using a mount board cutter was a complete failure and I ended up using a Stanley knife.
     
    Here's the basic dimensions of a T-Trak single module:
     

     
    The module should be 70mm high. The Gator Board I'm using is 10mm thick so sides are 60mm high and the deck adds 10mm to this to arrive at 70mm high.
    The modules are 308mm wide and 355mm deep. Front and back faces are fixed inside the side faces so are actually cut 288mm wide.
    So to create the module I needed:
     
    Two side faces 355mm x 60mm.
    Two front/back faces 288mm x 60mm.
    One deck (or top surface) 355mm x 308mm.
    I measured and marked my cuts from the factory cut side of the Gator Board using another small piece to keep my ruler right on the edge of the board. It's hard to visualise so here is a picture:
     

     
    I tried to always keep a factory edge where the small piece of board meets the cutting mat and where the piece being marked meets the small guide piece.
     
    I cut the pieces using multiple passes of a Stanley knife (with a fresh blade) using the long ruler that came with my Jakar mountboard cutting kit to guide the blade. As the board is tough even with the rulers rubber backing I needed to apply quite a bit of pressure to keep the ruler in place and the blade cutting straight.
     
    Now I may have been trying to force the knife to cut too quickly (probably) but I struggled to end up with a square cuts. Thankfully, this is where the toughness of the Gator Board helped. I was actually able to gently sand any not-quite-square cut edges with sandpaper!
    To keep my sanding efforts square I wrapped the sandpaper around another piece of Gator Board and tried to keep this flat as possible. It actually worked very well.
     

     
    It was only when putting this posts together that I remembered the facing contains glass fibres so sanding without a mask really isn't a good idea. Don't do what I did, wear a mask if you sand the board.
     
    I glued the pieces together with PVA glue (the bottle no longer has a label but I think it's some kind of Tacky glue as it's quite thick). I started by attaching one of the long side-pieces to the top deck, then an end, then the second side-piece and finally the second end-piece.
    Once the glue started to setup, I flipped the module over and put it under some weight to finish drying.
     

     
    It's not easy getting everything into position correctly and keeping it there. Trying to do it all in one go did lead to some swearing.
    There has to be an easier way of doing this and I'll have a think about this before I do this again.
     
    While gluing everything together it also became clear that one of my cuts wasn't quite as good as it should have been and there was a small gap where one of the end pieces touched a side piece. I had to inject a little bit of superglue gel into the gap as it was too late to re-cut or shape the edge of the board.
     
    Those of you with eagle eyes will also have noticed a dink in the bottom corner of the module already. That's actually from cutting where the knife drops off the edge of the board but it shows that even though Gator Board is much tougher than foam board you still have to be careful. However the final construction feels very robust, much more so than regular foamboard and it's should be able to take quite a bit of weight despite being very light.
     

     

     
    That's about it. A quick, easy and relatively cheap way to create a T-Trak module. Now all I've got to do is decide what to build on it.
     
    Simon
×
×
  • Create New...