Hi All,
I'm new to the forum, and pretty new at tuning CV's in DCC, So I'm hoping there will be someone out there that can provide some advise.
So I've fitted the decoder and speakers in the loco, the loco operates as it should and the sound also works.
There is a slight issue with the timings of the sounds;
1 - When the drain cocks close and the loco is supposed to start moving and then progress onto the next sound file, being low speed chuff's the following occurs
- Drain cocks sound and close, there is then a slight pause, the first chuff then sounds, then the loco starts to creep forwards.
2 - When the loco is then in motion, the chuff's aren't synchronised with the wheel movement
I'm pretty sure this is just because some settings need to be adjusted slightly, as not every loco runs the same, however I just don't know which CV's I need to adjust and what effect they should have. I assume that it's the back EMF settings that I need to adjust, but I'm no expert.
Any help would be greatly appreciated,
Chris