bkrenderman

I did this tutorial on weathering 3d printed portal for N scale. hope you like!

this is the actual video

Hi everyone.

I have made this Arduino based auto reverse loop that works by detecting shorts just like Digitrax AR1. I hope you find it useful - let me know if this can be improved - 

Hope you like these anyrail layout planning software tutorials - 

Here I have tried to describe how I did planing, visualization and virtual tour in Anyrail 3D . hope you like.

I am adding few more track work to this previously final layout its really tight at this point but I am trying to add some space in front - 

https://youtu.be/ZVd7SiGpPd0

Yes you can use simple servo attached to Piano wire. but the reason i am building this is to address 2 things.

One is obvious we need to switch frog polarity and that's where the SPDT switch helps. but second thing is more important and that is to use the Sensors to get the point position to the controller so it knows the current state of the point and accordingly can take decisions on automatic train operations.

I will be posting second video soon.

I dont have access to the after market point motor so decided to make my own from servo with proper linear motion. your suggestion are welcome i will be making frog connections later.
 

https://youtu.be/k7aY2UCjAMY

Part-1 - Designing the bridge

https://youtu.be/KADP3xJdvDE

Part-2 - Designing the Pier

https://youtu.be/qgvr_cX_54c

Part-3 - 3D Printing 

Hi

Here is my very small 4 * 2 N scale Layout called Rambridge. hope you like

Introduction-
https://youtu.be/YdIm9IQ8Ty8

Progress - 2
https://youtu.be/_6jWJLvdGYo

Progress - 3
https://youtu.be/_shmQo0oJzM

Final Layout-
https://youtu.be/ZVd7SiGpPd0

https://youtu.be/13qelLiGjoU

Hi this is my first post, i recently completed my very compact Layout 4*2 feet. here is the video - https://youtu.be/ZVd7SiGpPd0

hope you like it. I have also made several video of my progress on this layout which you can check on my channel.