I wrote a Forum post about some of these ‘absorbed’ engines back in 2014 but it has now been archived and has lost its illustrations, so I thought it was worth restoring these in this blog post, which is partly based on my original text.
Some time ago, I acquired a bound set of the RCTS "Locomotives of the Great Western Railway", mainly to learn more about the various pre-grouping designs by William Dean. I had tended to skip over the volumes on 'Absorbed Engines' but later found my
When I started this blog, a year ago, I wrote that my aim was to follow the conversion of my existing layout to an earlier time-frame. In practice, I seem to have spent most of my time designing and constructing new stock, while I have done relatively little to the basic framework of the layout itself. So, for this post, I decided to make a start on some 'backdating' of the layout scenery. Fortunately, static features of the landscape tend to change much more slowly than vehicles: I often notice
In my very first post in this Blog , I referred to the need for plenty of horses and the facilities to support them. As part of "Turning Back the Clock", I decided that an essential railway vehicle would be a Horse Box, so I chose to build the Wizard Models/51L etched brass kit of the GWR diagram N6 box.
Inspired by @magmouse description of his 7mm scale model, I decided to restore my own early post about my 4mm scale model.
Although at that time (2013), I had not started
NB There is a newer version of this post at :
In my OP in this Blog, I referred to the need for plenty of horses and the facilities to support them. As part of "Turning Back the Clock", I decided that an essential railway vehicle would be the Horse Box, so I chose to build the Wizard Models/51L etched brass kit of the GWR diagram N6 box.
I felt that the N6 was a suitable design for a beginner in etched-brass construction, as the prototypes, dating from 1890, were of a pa
I've finally worked out a simpler method for constructing a clerestory roof, so now I have all the vehicles needed to take Sir John's family up to London for the season.
On my first U29 composite, described in recent posts, I folded the roof from a single sheet of 5 thou brass sheet but found it difficult to make the reverse folds correctly. For the family saloon, which I now believe to be Diagram G13, I have therefore made the roof in three parts - two separate sides and the raised
As I mentioned in the previous post, I have been trying to track down a photo of the prototype of Sir John's special train.
Today, I have found one but unfortunately, the morning of April 1st 1892 was notable for the famous London 'pea-soup' fog.
Despite the photographer's best efforts he has been unable to capture much detail of the train. He has, however, used sepia toning very effectively to enhance the subject 🙂
Train in London Smog - 1st April '92
It's been a cold, wet, dull, Spring and I have been finding it difficult to gain much inspiration for modelling. I got somewhat bogged down in the intricacies of what Amy Wilcote calls those 'old broad gauge things'. I have, however, been enjoying viewing the splendid work shown by other modellers, in various threads on this site. So, in an attempt to get my own ideas flowing, I have been wandering around some of the less familiar parts of North Leigh.
The creamery is not a very attr
Time flies! Back in August, I wrote about the 'DCC Concepts' oil lamps that I had installed on the platform at North Leigh. Various events have conspired to limit my modelling activities of late, but I have finally got around to wiring up these lamps.
The enamelled copper wires attached to the lamps are extremely fine, so I mounted small printed circuit boards carrying block connectors, onto which I soldered these wires. This proved a rather cruel test of my eyesight since, although
I have written before in this blog about the Wilcote family, whose activities formed such a large part of the social life of North Leigh in the late 19th-century. Any regular readers will know a little about the younger daughter, Blanche, but her sister, Amy, was a far more serious character.
Like any well-educated young lady of the period, Amy enjoyed practising her artistic accomplishments. Remarkably, some of her work has survived and come into my possession, so I am fortunate to
Most of my train-running recently has been for the enjoyment of my young grand-children. For this, I tend to use my reliable ‘1854’ saddle tank, with its heavy ‘Wills’ cast body and ‘Hornby’ chassis that make it fairly ‘bomb-proof’
Trains at North Leigh
Suddenly, after what has been many months (if not years) of reliable running, the engine de-railed on the three-way point at the West end of North Leigh station. Following application of the ‘big hand in the s
I realise that I left matters hanging with the tender for No.184, in my post of almost two years ago!
The awful truth is that I rather lost interest, when I found that I had made the frames of the locomotive too wide, so that the outside cranks tended to bind. I simply couldn’t face starting again from scratch until, quite recently, I hit on the idea of simply cutting off the folded edges of the plate which supported these frames and fitting new support members, made from short lengt
It's been a while since my last entry in this blog - lots of summertime activities getting in the way of modelling! I've also had that common modeller's problem of having so many things to do that it's been hard to decide where to start.
I'm afraid that I have, once again, ignored Blanche's petulant pleas for new dresses and got down to the more mundane task of building a tender for No.184. I produced an outline drawing for this tender by starting from a side-on photograph of what ap
When I decided to base my layout around the never-built line to Witney through North Leigh, it was simply a whim, derived from a map shown on Martin Loader's website about the Fairford branch.
As I have got 'drawn in' to the scenario, I have begun to learn more about the area and have found, to my surprise, that some of my 'fiction' is closer to the truth than I thought. My layout incorporates several 'features', including a quarry, saw-mill, and.lime kilns.
From s
Although popular with several European manufacturers, tender-drive has never been well-regarded in UK, possibly because of some rather poor implementations back in the 20th century. Nevertheless, it does have some advantages, when modelling prototypes from the 19th century. Locomotives of that period were generally quite small, with open cabs, and most passenger classes used single drivers until quite late in the century. These characteristics create two problems for the modeller: there is littl
I have written before in this blog about the convenience of using tender-drive for small 19th century locomotives, especially for 'single wheelers'.
In my earlier post, I described the conversion of two types of tender kit, both of which represented Dean 3000 gallon tenders. Since then, I've read 'GWR Tenders and all that' in drduncan's blog, which, amongst many other useful insights, showed the close similarity between Dean's 2500 gallon and 3000 gallon designs. He also comments on
I've read that some people like blog posts to be fairly substantial, so I'll include a resumé, in this post, of the story so far, before showing photos of my model of GWR No. 184. There are more details in the earlier posts in this series.
Background
I chose this prototype since it was one of the first standard-gauge engines to run on the GWR, following the absorption of the Oxford, Worcester, and Wolverhampton Railway (otherwise known as the 'Old Worse and Worse'). No.18
Although this may seem a short post, it represents a very big step for me! I had been seriously concerned that I would not be able to construct a chassis with sufficiently well-aligned axles, within the constraints of my own abilities and my lack of any real workshop facilities - just a desk and Dremel drill on a stand.
My work-desk
When one builds a kit, the designer has already made lots of difficult decisions for you. A scratch-builder has to think out eve
I feel it is time for an update on progress with my model of GWR No.184. After a rather static period, when I did little actual modelling but thought quite a lot about the details of this engine, I have at last been cutting metal.
In fact, apart from the fact that it is now made of brass, I have made few changes to my initial paper template. My method of construction followed that used on my first scratch-built model (GWR 'Queen'-class - described in Railway Modeller July 2014). In s
Part 4 already, and I've not actually touched any metal yet! My thanks to all who have given encouragement by their 'Likes' and a warning not to expect any 'model engineering' in this thread - it's more like cut-out scrap-booking - but I enjoy it and it might lead to a working model.
Since my last post, I've re-visited the cab area, so that it can accommodate the rear pair of drivers. On my paper model, I've cut slots in the front of the cab and floor, to allow for the 14.4mm back-to
I've re-titled this thread, so that it doesn't read as though I'm building a whole fleet of engines - one at a time is enough for me!
My first attempt at scratch building was a 'Queen'-class 2-2-2. I chose it on the grounds of simplicity, since building an uncoupled 2-2-2 is little different from building a wagon. My first step was to draw the constituent parts and then cut these out as a series of paper templates, so that I could check the fit of the parts and explore different asse
A comment on my recent post about modelling Rocket reminded me that my first scratch-built locomotive was an Armstrong 2-2-2 that I constructed 10 years ago and described in ‘Railway Modeller’, July 2014 , as ‘Simply Victorian’. I explained in that article that I was encouraged by a drawing of one of these engines in Russell’s ‘A Pictorial Record of Great Western Engines’ with the caption comment that: "The utter simplicity of these early engines can be seen." The idea of ‘simplicity’ appealed t
Having gone right back to 1804 with Trevithick’s locomotives, I decided to start moving forward again - to Stephenson’s famous ‘Rocket’, which was to put passenger-carrying railways firmly on the map.
When I built my Trevithick model, I wanted to put it alongside a model of ‘Rocket’ to illustrate the progress made over 25 years but, although I know I have a 4 mm scale model built from an Airfix kit, ‘somewhere’, I couldn’t find it!
I did find however that there is a 3D pr
It's now over two years since I built my first locomotive from scratch, using brass sheet. It's still looking quite good and helped to inspire me to continue with building lots more scratch-built stock. For more information about my model, see 'Railway Modeller', July 2014, "Simply Victorian".
My model of the GWR 'Queen' class
It really was simple to build - basically a brass tube over a brass plate, with a very simple 'chassis' to hold a set of wheels at the right
I’ve now managed to produce a set of ‘printable’ parts from the original download from the ‘Printables’ website described in my previous post.
I’m still puzzled by the theories on exactly which of Trevithick’s locomotive engines was actually used for the Penydarren trial, which was the moment in history that put the steam locomotive on the map.
There is a print in the Science Museum collection, said to be the Penydarren engine but it has been discredited because, accord
I have not forgotten about my plans to create a diorama, as described in my Broad Gauge blog.
While I was researching the early days of the GWR, however, I found myself thinking about what had gone before – back to the ultimate pre-grouping period! This led me to Trevithick’s engines, of which I photographed a replica at Blists Hill Museum near Telford:
Trevithick replica at Blists Hill Museum
Trevithick was a remarkable inventor but, sadly, not a good
