The last building is William Fish & Son.
The building is based on the T024a Industrial A – Warehouse from Scalescenes.
For the roof I used the zinc roof texture from the Scalescenes Garage and for the slated part TX184 = Mixed grey roof slates from Modelrailwayscenery.

When I designed this diorama I wanted to use a large advertising board on this building.
To create tis one I used a layered approach. And as I promised I would show you how I did it.
You need two advertising boards to realise it.
Cut out the poster inside the frame.

Next step:
Put the frame on top of the second poster.

And the end result: a layered advertising board. Although almost invisible on the pictures.

Then you can glue the advertising board on the building.

The picture shows the final result after weathering.

The building is built in the same way as the goods receiving office and also weathered, using the same materials.
The doors are from the internet. The sign is made myself using Publisher.

Although the roof texture is designed to glue it in one part on the roof, I decided to using the method I also used for the roof for the Goods Receiving Office. A layered approach gives you the opportunity to create an individual roof.

As you can see I used the roof Scalescenes created for the ware house as a guidance. For me the mixed slates are going very well with the colours of the bricks.

I also wanted to give the side wall of the building some more character. So I gave it a window and u bricked up door.

And because a picture says more than a thousand words some pictures op the final building.

The alley between the two buildings.

A birds-eye view of the building

Now I can give the diorama a final finishing touch. Looking critical to the pictures I have made an adding a final detail or some final details.

As always comments and suggestions are welcome.

Kind regards,
Job