A gathering of gronks?
I've a peculiar habit - nothing like that! No I mean I've a habit of revisiting older models and bringing them up to my recent standards.
This is most evident when I have more than one of a locomotive type - actually that's nearly all my stock (3 08/09s, 2 33s, 3 37s and just one 58). I find working on a newer model makes me re-evaluate a previous effort and look to improve it. I guess this progression is pretty natural and is a good way for a beginner to progress - so guys, don't be afraid of re-working models you thought you'd finished - it's very satisfying.
So what is all this waffling about?
Yup - my brace of 08/09s. I've a thing about the Bachmann model (although I reckon all three need tweaking mechanically to improve running a little) and it responds really well to weathering and detailing. The models were completed in the order EWS, RF Grey and most recently the Mainline liveried 09 (featured in December 2009 Model Rail ). As I've done each model I've updated the previous versions and after completing the last of the three and adding wire handrails to my Pacer project I wondered if the small short Gibson handrail knobs I'd aquired for that project could be used on the 08s?
The answer - as you can see, is yes! Check out the revised foot step handrails!
The foot steps need modifying first (as described in the article) with plasticard to make them wider. Then you can drill 0.5mm holes at the top to fit the knobs. Once these are fitted I added 0.33mm Gibson handrail wire (easier the thread then the 0.45mm - so less fiddly). I'm really impressed - so impressed that I'm going to roll out the modification to the other pair at the same time!
I've also added improved pipework under the cab and revised the vacuum pipe. I also need to add one extra air pipe to each end - and then just touch in the details. These models are ones I'm really proud of - the humble shunter and mundane appearance of all three is perfect for my layout. I think the Bachmann model, with these small modifications really comes to life. I'm planning on fitting Brassmasters rods to all three at some point this year once I master soldering with my Judith Edge Sentinel kit in the summer.
After my recent 37 detailing I'm planning to revisit my model of 37013 next - but have a plan of attack on Paxton Road thought out for the next month or so to try and progress the warehouse area despite the cold weather.
Questions, comments etc welcome as usual - I'll keep an eye on the comments and respond as necessary. If you're interested in the weathering finishes I can elaborate as the original posts describing the work are now on RMweb 3 which as of this week is still unavailable unfortunately.
15 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now