Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 20/12/18 in all areas

  1. Over the last couple of weeks I've managed to get the final scenic baseboard constructed. This board will house the completely fictitious sidings to a mill. I've already got most of the mill buildings which are based on Ebridge mill in Norfolk. The board is a slightly odd shape to incorporate a removable section which will lead the track round to the fiddle-yard. This is made removable so that the bed which sits in the railway room can still be used when needed as a bed! At the other end of the layout the overbridge is coming along nicely. This is mainly cut in 1mm MDF with a frame of 3mm. I've painted with Humbrol brick red, applied mortar with 'Wilko' own-brand fine filler and then applied some washes of Vallejo Acrylic grey. The white painted section is for sighting the advanced starter signal which is just in front of the bridge. The wing walls will be buried to around 40 degrees in the sides of the cutting. The original bring looks like this. It is a 5 segment arch bridge, which means that there are 5 arcs which form the elliptical shape. Following some discussion on the Scalefour society forum I was appraised that just drawing an ellipse in CAD wasn't accurate as the builders would not have been able to make form-work based on an ellipse. The internet revealed how to construct a 5 segment arch with rather too many uses of the word 'bisect' for my humble brain. Still it's Scalefour - getting it - Alright! A fair amount of consolidation and re-pointing has happened on the bridge so I don't trust that the weathering now is what it looked like in 1955. There is probably quite a bit less soot and a lot more lime leaching out of the brickwork now. Moving on the the fiddle-yard I had another go at making a cassette. This time I used a base of 3mm ply rather than 6mm. This has several advantages over the earlier version. The 3mm version has a little flex in it and actually sits better on the baseboard. The difficulty of making two surfaces completely flat over the size of the cassette meant that the original 6mm version had a tendency to rock along its length. Secondly the use of 3mm ply means that I can make the tongue and groove joint in two layers of different sizes, this then gives some vertical alignment which the earlier version didn't have. The cassette and the entry track can be brought together and we now get horizontal and vertical alignment. I've also drawn up a first experiment for the 'cassette clamp' which I'll try to cut over the next day or two. David
    4 points
  2. After nearly four months off the workbench, due to Railway Commissions - the Shack is back to be finished. To be honest there wasn't a much to do - main undercarriage, wheels, props, a few aerials/pitot tubes, some painting and an awful lot of transfers! Prop assembly - 3 parts to each prop, 8 props and once painted 9 decals per prop! Painting the main under carriage wheel bays - while I was doing this, the wheels & undercarriage struts & doors where in paint. Adding the transfers - there's a lot! Once the wings where decaled up underneath, I fitted the undercarriage. Props test fitted at this point and rear props had the shaft hole opened up to ensure they rotate (no innuendo please)! Both wings done and glued on. 72 decals later the props where added. Finished Shackleton and a cameo... And a Christmas treat - The Three Wise Avro's.. Till next time TBG
    3 points
  3. Brickhill progress update. Next tasks: signalling and snow fences.
    1 point
  4. Hi. Bit of an odd ball posting this time, when are they not? The first three photos go back a considerable period of time. The first one is the cover of the first dedicated railway book I bought. Railways had featured in other books such as the Odhams Press publication How it Works and how it's Done. . but this was my first real railway book. As may be seen from the cover it is the script of a B.B.C. broadcast. On the title page it quotes, A dramatisation of events that occurred at a vital Cross-roads on the path to victory on a certain day in 1944 between the hours of 10am and 10pm. The 6th June springs to mind but the book was published in June so presumably the broadcast was before that. Also the forward to the book by the then Minister of War transport is dated 2nd June. So make of that what you want. There is a good selection of photos in the book if any of you would like me to attach them sometime .I was 15 at the time and had been working a year. The second photo goes back to 1962. It was taken at the Leeds Model Railway Exhibition for publication in the Yorkshire Post Paper. It's my son and myself. He was nine at the time and is due to become a Grandad in April. The Leeds Exhibition at that time was held in the Corn Exhange, and was that a dusty place..The Aire Valley did three shows there and the layout got a nice coating of dust. There was no way to dust it and in the end I thought it antiquated the layout. The third photo was taken at a show in Huddersfield organised by the Yorkshire Area of the Talyllyn Railway Preservation Society in 1964. It's my youngest daughter, now a double Grandmother, holding a model, not built by me of a Corris loco. Hovering just off scene is the builder of the model ready ready to catch it if the worst happened. It was handed back undamaged. the remaining photos all-though recent are of an older subject. It's a model I built about 1965/66 of Emmet's Nellie and train. I think this was the time when Emmet's locos and stock were popular with modeller's. I think the loco chassis is Triang. I remotored it last year. The coaches are scratch built and have an oil lamp for illumination. These are made from a grain of wheat bulb with a short length of brass tube for the oil container and a Chinese style hat on top. These and the bulb in Nellie's headlamp are the original ones. It is now in the possession of the fore mentioned daughter. It is normally kept in a display case but gets to run round the Christmas tree each year. I am also including a photo of a HIAB sea crane I built from a kit I got at the Blackpool Model Boat three years ago. Once again this is in the possession the afore mentioned daughter works for HIAB in the main office in Ellesmere. Think that's about it for now. Cheers. Derek.
    1 point
×
×
  • Create New...