RMweb Gold Hattons Dave Posted May 18, 2020 Author RMweb Gold Share Posted May 18, 2020 Hi all, I've replied to the above points on the A4 thread which should be of interest: Cheers Dave Link to post Share on other sites More sharing options...
kiwitrains Posted May 31, 2020 Share Posted May 31, 2020 Help- A3 ‘Flying Scotsman’ could anyone tell me where the following part goes and how does the the fall plate fit when the lugs are the wrong way around. The other problem I have got is how to fit the link couplings to the tender in place of the kadee type. thank you in anticipation Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted May 31, 2020 RMweb Premium Share Posted May 31, 2020 (edited) Top image is one of the seats in the cab. And how do you mean the lugs are the wrong way round? Edited May 31, 2020 by Hilux5972 1 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted May 31, 2020 RMweb Gold Share Posted May 31, 2020 I did away with those tiny and almost useless folded over brass lugs on the fallplate after one came off. I removed the other one and replaced them with longer ones made from steel and simply glued in place. Much easier now to locate and stay in place. The seat you can just glue back into place. Cheers, Ade. Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted May 31, 2020 RMweb Gold Share Posted May 31, 2020 Forgot to reply re the coupling on the tender. As well as the cosmetic knuckle coupling there is a standard hook. Link to post Share on other sites More sharing options...
kiwitrains Posted May 31, 2020 Share Posted May 31, 2020 Thanks for that, how do you remove the dummy coupling to install the link. thanks Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted May 31, 2020 RMweb Premium Share Posted May 31, 2020 1 hour ago, kiwitrains said: Thanks for that, how do you remove the dummy coupling to install the link. Give it to a courier for half an hour 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted May 31, 2020 RMweb Gold Share Posted May 31, 2020 Have a look at your model. There is already a hook there, no need to add or remove anything if you are using three link couplings or screw link couplings. It is partly hidden by the corridor connection. Hope this helps? Cheers, Ade. Link to post Share on other sites More sharing options...
kiwitrains Posted May 31, 2020 Share Posted May 31, 2020 Thanks very much see it now. 1 Link to post Share on other sites More sharing options...
kiwitrains Posted August 9, 2020 Share Posted August 9, 2020 Just to keep you up to date with my dilemma regarding the A3 I have had Three Flying Scotsman and all have been faulty First one the running gear collapsed second one would not run seemed to be seized and the third four of the 6 wheels were buckled, all of them had parts dropping off too many to mention here. I am waiting now for instructions from Hattons on the return of #3. The problem I have I live in Western Australia and as far as I know there is nobody can repair these and I cannot do it myself I suggested they send me a complete new chassis as if I get a complete loco I have taxes of some sort to pay. Anyway I am not having another complete one. One point is I purchased an A4 `Sir Nigel Greasley` and it is perfect . We will see what happens this time. Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted August 10, 2020 RMweb Premium Share Posted August 10, 2020 23 hours ago, kiwitrains said: One point is I purchased an A4 `Sir Nigel Greasley` and it is perfect . Perfect apart from the name plate! 3 1 Link to post Share on other sites More sharing options...
johnhutnick Posted August 11, 2020 Share Posted August 11, 2020 I am in the US. Based on the discussions here, I would not purchase the Heljan Scotsman. I do not want pieces breaking off. I have acquired a Sunset models 2-rail brass A3 unlettered. Does anyone have an opinion on these? What would be the most popular loco name to use other than Flying Scotsman? Link to post Share on other sites More sharing options...
Simond Posted August 11, 2020 Share Posted August 11, 2020 John, if my memory can be relied upon, David L O Smith may have (had) one of those. He goes by the nickname of Isambarduk on here. Might be worth a pm. atb Simon Link to post Share on other sites More sharing options...
Guest Isambarduk Posted August 12, 2020 Share Posted August 12, 2020 On 11/08/2020 at 17:53, johnhutnick said: I have acquired a Sunset models 2-rail brass A3 unlettered. Hmm. Well I hope it is better than mine was when I acquired it. On my webpage about Royal Lancer, I wrote: "Recognising that I would never have time to build all the locomotives and rolling stock that I would like and that I did not know so much about the LNER, I decided to order a ready-to-run A1 from Sunset Models when they were announced in 2005. My model was eventually delivered late in 2007 but I was somewhat disappointed to discover that it was a very poor runner with an intermittent short and that it had a number of components that were damaged or that had broken free in transit. Scott Mann at Sunset Models is a friendly chap and he did try to offer advice when I saw him at shows but he was unable to help in practice. Peter Dawson of Kemilway, the UK importer, did not wish to know so, in the end, it was down to me to sort out the problems. None of them was difficult to correct but I found it a bit hair-raising working on a fully painted model to which David Studley had superbly added the numbers and corrected the lining. There was also a problem with the on-board Quantum QSI electronic control and sound system, which periodically shorted out bringing the train to a sudden and complete stand whilst the acceleration function restarted and the train slowly moved off once more. I disconnected the motor from the control system, to revert to traditional DC control, and the loco actually performs far better without the control system, so I have left it this way. I did find the source of the intermittent short but I decided not to restore the sound." Although I could fill in a bit more here, I thought it prudent not to write too much on my website! David Link to post Share on other sites More sharing options...
micklner Posted August 12, 2020 Share Posted August 12, 2020 39 minutes ago, Isambarduk said: Hmm. Well I hope it is better than mine was when I acquired it. On my webpage about Royal Lancer, I wrote: "Recognising that I would never have time to build all the locomotives and rolling stock that I would like and that I did not know so much about the LNER, I decided to order a ready-to-run A1 from Sunset Models when they were announced in 2005. My model was eventually delivered late in 2007 but I was somewhat disappointed to discover that it was a very poor runner with an intermittent short and that it had a number of components that were damaged or that had broken free in transit. Scott Mann at Sunset Models is a friendly chap and he did try to offer advice when I saw him at shows but he was unable to help in practice. Peter Dawson of Kemilway, the UK importer, did not wish to know so, in the end, it was down to me to sort out the problems. None of them was difficult to correct but I found it a bit hair-raising working on a fully painted model to which David Studley had superbly added the numbers and corrected the lining. There was also a problem with the on-board Quantum QSI electronic control and sound system, which periodically shorted out bringing the train to a sudden and complete stand whilst the acceleration function restarted and the train slowly moved off once more. I disconnected the motor from the control system, to revert to traditional DC control, and the loco actually performs far better without the control system, so I have left it this way. I did find the source of the intermittent short but I decided not to restore the sound." Although I could fill in a bit more here, I thought it prudent not to write too much on my website! David Looks very nice, however the Tender wheels on your site show green they should be all black. Link to post Share on other sites More sharing options...
johnhutnick Posted August 13, 2020 Share Posted August 13, 2020 If you check US Ebay completed listings, this is what I bought: item number 154023179744, Sunset 2-Rail British Gresley Flying Scotsman Steam Engine F/P O-SCALE. It was listed as needing work. Writing to the Seller, the gearbox, etc. is original. I figured that for the price, I could fix it. Regarding the comment from micklner, the tender wheels are green. For me in the US, this is of little concern. I would appreciate it if someone could suggest what would be a popular name. Link to post Share on other sites More sharing options...
mcjlf1 Posted August 13, 2020 Share Posted August 13, 2020 Take your pick from this list... https://en.wikipedia.org/wiki/List_of_LNER_Class_A1/A3_locomotives How about one of these: 4479 - Robert the Devil 2745 - Captain Cuttle 2506 - Salmon Trout If you're a fan of Star Trek, then there's always 4480 - Enterprise. oh, just one more thing - 2501 Colombo 1 Link to post Share on other sites More sharing options...
johnhutnick Posted August 13, 2020 Share Posted August 13, 2020 Thanks for the suggestions. I have been doing further research. The Sunset model has a corridor tender, as you may see in the Ebay listing photos. From what I read, LNER made 10 corridor tenders: http://www.doncasterworksrecords.org.uk/Part-28.html This shows corridor tenders built in 1926 allocated to 2743-2752. Then it lists actual engine numbers 4472/76, 2573/80/46/69/56 and 2743-45. I figured that there must be some LNER experts here who can tell me what loco numbers/names actually used a corridor tender. The SS model has spoked tender wheels, which is earlier. Link to post Share on other sites More sharing options...
Guest Isambarduk Posted August 13, 2020 Share Posted August 13, 2020 23 hours ago, micklner said: the Tender wheels on your site show green they should be all black. That's how Sunset Models must have painted them and David Studley (expert painter of locos LNER) did not alter them ... so that's the way they'll stay. But thanks for your comments, anyway. David Link to post Share on other sites More sharing options...
jay*bobble Posted August 13, 2020 Share Posted August 13, 2020 Papyrus. Sir fredrick banbury. Had corridor tenders. As for names blenhieme. Geltymore . trigo Doncaster. Night of thistle. Merry Hampton. Call boy. Flying fox.prince palatin. Spearmint .lemberge. come to mind.all nice names well I think so Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted August 13, 2020 RMweb Premium Share Posted August 13, 2020 5 minutes ago, jay*bobble said: Papyrus. Sir fredrick banbury. Had corridor tenders. As for names blenhieme. Geltymore . trigo Doncaster. Night of thistle. Merry Hampton. Call boy. Flying fox.prince palatin. Spearmint .lemberge. come to mind.all nice names well I think so It would probably be more helpful if the names were spelt properly. Blenheim Galtee More Knight of Thistle Prince Palatine Lemberg 2 1 Link to post Share on other sites More sharing options...
johnhutnick Posted August 17, 2020 Share Posted August 17, 2020 For everyone's interest, I had the following in a message from the LNER Society. Below is the list of A3’s that never had the corridor tender with spoked wheels 2747 Coronach 2748 Colorado 2751 Humorist 2595 Trigo 2596 Manna 2597 Gainsborough 2598 Blenheim 2599 Book Law 2795 Call Boy 2797 Cicero 2500 Windsor Lad 2502 Hyperion 2503 Firduassi 2504 Sandwich 2505 Cameronian 2507 Singapore You have to be careful with any of the rest because the tenders were only attached when they were on the Non-Stop Flying Scotsman allocation Full details are in Yeadon’s Register of LNER locomotives Volume 1. After reviewing what I can find online, my conclusion is that for me, I will use PAPYRUS, figuring that would be the second most famous A3 after Scotsman, based on the 1935 speed run. There is a Locos in Profile print showing this loco with a spoked corridor tender. Also, in gettyimages.com I found the original LNER photo showing PAPYRUS in this configuration. Also, I checked a Sunset 3-rail Scotsman that I have, and it uses solid tender wheels. And amusingly, American English uses spelled instead of spelt. Link to post Share on other sites More sharing options...
norman Posted November 5, 2020 Share Posted November 5, 2020 Seen on Hattons web site today. Looks like a return due to gear problems. Pity about the design and build quality though. Heljan H7-A3-002-PO O Gauge (1:43 Scale) Class A3 4-6-2 4472 "Flying Scotsman" in LNER Grass green with unstreamlined corridor tender - "Record Breaker" - Pre-owned - sold as seen - motor runs but slipping gears - Good box Link to post Share on other sites More sharing options...
Nova Scotian Posted November 5, 2020 Share Posted November 5, 2020 That's so odd - why wouldn't it be still within warranty to be sent back for repair? Link to post Share on other sites More sharing options...
norman Posted November 6, 2020 Share Posted November 6, 2020 I don't think the Chinese do repairs, Heljan in Denmark also, so you are left with selling them off cheaply in the hope that there are mugs who will buy them. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now