61666 Posted September 5, 2018 Share Posted September 5, 2018 At Guildex last weekend, I was fortunate to acquire a J15 kit from the remnants of Richard Chown's estate. It is etched brass [no castings] and comes under the label of TDM and Studio Scale Models. TDM stands for Terry McDermott of Dublin. The etchings are actually dated 1985, but the kit is 1998 as this is the date of the letter Terry sent to Richard with the kit, reminding him he still owed £2.50 P&P! Any info on this kit would be most welcome, especially any thoughts on where to source castings for buffers, springs, axle boxes, safety valves, cab detail etc. At the moment, all I have is a chimney and dome, though there is a nice outline drawing included. Link to post Share on other sites More sharing options...
Horsetan Posted September 5, 2018 Share Posted September 5, 2018 (edited) You might want to ask Des Sullivan at SSM whether he was handed any 7mm artwork or castings for the J15 when he took control of SSM. There is also the possibility that the 7mm frets were done as a one-off for the late Mr. Chown; I've never seen one. Edited September 5, 2018 by Horsetan Link to post Share on other sites More sharing options...
John M Posted September 5, 2018 Share Posted September 5, 2018 You might want to ask Des Sullivan at SSM whether he was handed any 7mm artwork or castings for the J15 when he took control of SSM. There is also the possibility that the 7mm frets were done as a one-off for the late Mr. Chown; I've never seen one. As far as I recall the SSM produced the J15 as a set of etches in 7mm in nickle silver when Paul Green operated the business, I remember seeing the frets at an MRSI club night about 20 years ago no castings were included. Dave Walker (also also modeled the WLWR in the same era as Richard Chown) had a very nice J15 on his 7mm Killaney layout which may have been assembled from TMD/SSM etchings rather than scratchbuilt. 61666 description indicates that the original 1985 4mm J15 TMD artwork may have been "blown-up" to 7mm scale. Link to post Share on other sites More sharing options...
kirley Posted September 10, 2018 Share Posted September 10, 2018 David I have the instructions of the TMD 4mm kit if that is of any use to you? Link to post Share on other sites More sharing options...
61666 Posted September 13, 2018 Author Share Posted September 13, 2018 Thank you, but there are a set in the kit, including an outline drawing. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now