sonofjamie Posted September 29, 2015 Share Posted September 29, 2015 HI, New to the forum, so apologies if this has already been discussed. I have just sent an order away for 3 pairs of FLA's with containers and while I am waiting for their arrival I just wondered if REALTRACK (or anybody else for that matter) has any plans to produce the 'inner' version of these wagons?? Link to post Share on other sites More sharing options...
RMweb Premium Bernard Lamb Posted September 29, 2015 RMweb Premium Share Posted September 29, 2015 Both Charlie and Arran are members on here so why not get in touch with either of them? They are both quite friendly and don't bite. Bernard Link to post Share on other sites More sharing options...
arran Posted September 29, 2015 Share Posted September 29, 2015 HI All Its a different wagon but some have done some kit bashing to achieve that look. If you need spare decks give me a call. Regards Arran Link to post Share on other sites More sharing options...
Glorious NSE Posted September 29, 2015 Share Posted September 29, 2015 Doddy, there was an earlier build of FLA under BR which were originally in sets of 5 (but variable these days) - as Arran says other than basic configuration there's almost no parts the same between the two though. Link to post Share on other sites More sharing options...
sonofjamie Posted September 29, 2015 Author Share Posted September 29, 2015 Unlikely. The Realtrack 'FLA' wagon is a coupled pair. Are you sure your not mixing these up with the Five-Unit British Railway Freightliner Wagons? They had inner (FFA) and outer (FGA) wagons: aka, FGA+FFA+FFA+FFA+FGA. Bachmann plan to do these. See link http://www.rmweb.co.uk/community/index.php?/topic/87703-Bachmann-announce-ffafga-early-container-flats/ As quoted from the Astra Rail website: FLA 2 x 40´ | 8-axle UK container wagon (Lowliner) This wagon with 2 platforms is designed for transportation of 9’6” high 2500 mm wide containers within W8 and SB1-C gauge on a loading deck of 40’. Wagon platforms are connected by a tie rod. http://www.astrarail.com/products/intermodal-wagons/fla-2-x-40-lowliner/ Hi Doddy, Thanks for your comment but no, I am aware of these and looking forward to their release. According to the LTSV Wagons website, FLA's also ran in a similar configuration to the FGA/FFA i.e 3 'inners' and 2 'outers' :- http://www.ltsv.com/w_profile_053.php There is a picture of an FLA 'inner' on the right hand side of the article. Link to post Share on other sites More sharing options...
sonofjamie Posted September 29, 2015 Author Share Posted September 29, 2015 These are some pictures of FLA 'inners' in case anyone thinks I'm making it up. http://ukrailwaypics.smugmug.com/UKRailRollingstock/F/FLA-lowliner-Freightliner/i-MXZrVXC/A http://ukrailwaypics.smugmug.com/UKRailRollingstock/F/FLA-lowliner-Freightliner/i-8n5rWb3/A http://ukrailwaypics.smugmug.com/UKRailRollingstock/F/FLA-lowliner-Freightliner/i-8n5rWb3/A http://ukrailwaypics.smugmug.com/UKRailRollingstock/F/FLA-lowliner-Freightliner/i-PBghtqX/A Link to post Share on other sites More sharing options...
sonofjamie Posted September 29, 2015 Author Share Posted September 29, 2015 HI All Its a different wagon but some have done some kit bashing to achieve that look. If you need spare decks give me a call. Regards Arran Hi Arran, Cheers! and thanks. I have also just taken delivery of a large order of various containers from yourself (reefers, tanks, and dry boxes). Well impressed!!! The 'Cast' containers are particularly welcome as these are a bit of nostalgia for me. I've been looking for 'Cast' containers for years as I used to drive lorries with these on a regular basis. The haulage company that I drove for did a lot of work for the 'Cast' shipping company as well as 'Ellerman' (Cunard Ellerman I believe?). Link to post Share on other sites More sharing options...
Chrisjh Posted December 27, 2016 Share Posted December 27, 2016 HI, New to the forum, so apologies if this has already been discussed. I have just sent an order away for 3 pairs of FLA's with containers and while I am waiting for their arrival I just wondered if REALTRACK (or anybody else for that matter) has any plans to produce the 'inner' version of these wagons?? Evening, I have just purchased 10 FLA's from Charlie which are lovely wagons. Just wondering if I could get some guidance? I can only seem to run 7 x FLA wagons (14 x Hi Cube Containers) and then only when I double head the consist. My curves are greater than 4th radius as I have used peco flexi track. If I run more than 7 FLA's the train hardly moves and then on entering the first bend they de-rail which would suggest that the physics aren't correct. By comparisionI can run 18 x Gulf Oil 100 tonne tanks with a single class 66. Greatly appreciate any help, Anyone any ideas? Best, Chris Link to post Share on other sites More sharing options...
arran Posted December 28, 2016 Share Posted December 28, 2016 Evening, I have just purchased 10 FLA's from Charlie which are lovely wagons. Just wondering if I could get some guidance? I can only seem to run 7 x FLA wagons (14 x Hi Cube Containers) and then only when I double head the consist. My curves are greater than 4th radius as I have used peco flexi track. If I run more than 7 FLA's the train hardly moves and then on entering the first bend they de-rail which would suggest that the physics aren't correct. By comparisionI can run 18 x Gulf Oil 100 tonne tanks with a single class 66. Greatly appreciate any help, Anyone any ideas? Best, Chris HI Chris The bogies are inside bearing which do create more friction, try using some dry lubricant on them like a graphite. Regards Arran Link to post Share on other sites More sharing options...
Chrisjh Posted December 28, 2016 Share Posted December 28, 2016 Thanks Arran I have tried graphite based on a previous post. The consist just de-rails, it seems that it is over torqued as the wagons as they enter the greater than 4th radius curve are pulled across the curve and fall over. Not seen this before when longer consists are hauled over the track. Greatly appreciate any further thoughts. Best, Chris Link to post Share on other sites More sharing options...
Glorious NSE Posted December 28, 2016 Share Posted December 28, 2016 If they are stringlining (pulling taught and rolling over on the inside of the curve) then you might want to try adding some weight in the the containers at the start of the consist. Link to post Share on other sites More sharing options...
royaloak Posted December 28, 2016 Share Posted December 28, 2016 Are the bogies free to rotate enough without binding or the wheels contacting the framework, are the bogies able to 'rock' to allow for any slight discrepancies in track alignment. I know this is all basic stuff but sometimes its the obvious stuff we miss. Link to post Share on other sites More sharing options...
Chrisjh Posted December 28, 2016 Share Posted December 28, 2016 Many thanks Royal Oak and Glorious NSE I have added some small Industrial magnets to the first four container wagons in reducing amounts from the engines. Unfortunately they still de-rail. I have checked the bogies and they are free. I just think if I did the engineering calcs then the physics would determine the maximum consist is 7 FLA's given the parameters stated. Great shame given that I can run 18 x Gulf 100 Tonne Tankers with 1 x Class 66 (although rather slowly over the incline) any other ideas would be greatly appreciated. Best, Chris Link to post Share on other sites More sharing options...
Trade Member charliepetty Posted December 29, 2016 Trade Member Share Posted December 29, 2016 Many thanks Royal Oak and Glorious NSE I have added some small Industrial magnets to the first four container wagons in reducing amounts from the engines. Unfortunately they still de-rail. I have checked the bogies and they are free. I just think if I did the engineering calcs then the physics would determine the maximum consist is 7 FLA's given the parameters stated. Great shame given that I can run 18 x Gulf 100 Tonne Tankers with 1 x Class 66 (although rather slowly over the incline) any other ideas would be greatly appreciated. Best, Chris On the Real Railway, FLA Wagons do not run in rakes, the are used as 'Add Ons' to fixed formations, so the chances of long rakes of FLA's are very rarely seen, If ever! Charlie Link to post Share on other sites More sharing options...
Chrisjh Posted December 29, 2016 Share Posted December 29, 2016 Thanks Charlie, we despatch at least a full rake of Hi cube FLA's on our network every day as a result of customer demand. My Ops Manager tells me we have just despatched a full rake of FLA's on the 1548 from Birmingham to Southampton which left an hour ago. He also tells me the 0932 Southampton to Coatbridge today was also made up of a full rake of Hi Cube FLA's. Regards,Chris Link to post Share on other sites More sharing options...
MRDBLUE17 Posted December 29, 2016 Share Posted December 29, 2016 Hi Chris, My layout has curves that are very tight in places especially into the fiddle yard and whilst certain trains are not seen at exhibitions at home I have tested various rakes for other projects. (Including 15 HHA's with the full chassis block 150 hauling it) Sometimes the odd derailment has occurred and is often down to 1 wheel set or bogie. You might have already done this but run the rake slowly and try and work out the exact spot where a wheel or bogie catches, could be a Rail joint, could just been a tight wheel or bogie which is causing it. Once this is found you can take that wagon out and see if that helps or put it in a different spot behind the locos and see if that cures the problem. Hope that helps Mark Link to post Share on other sites More sharing options...
Trade Member charliepetty Posted December 29, 2016 Trade Member Share Posted December 29, 2016 Thanks Charlie, we despatch at least a full rake of Hi cube FLA's on our network every day as a result of customer demand. My Ops Manager tells me we have just despatched a full rake of FLA's on the 1548 from Birmingham to Southampton which left an hour ago. He also tells me the 0932 Southampton to Coatbridge today was also made up of a full rake of Hi Cube FLA's. Regards, Chris I stand corrected! When built that was not there purpose we were told, I hasve got loads of photos of these, never seen a full rake of Twin Sets. Charlie Link to post Share on other sites More sharing options...
Chrisjh Posted December 29, 2016 Share Posted December 29, 2016 Thanks Charlie thanks Mark, yes I have swapped the consist around to see if that makes a difference. They seem to de-rail at lengths of greater than 7 x FLA's in every curve. A real shame these are great models. Best, Chris Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.