hayfield Posted August 2, 2016 Share Posted August 2, 2016 I am going through my chassis box and I have an EM gauge chassis with a wheelbase of 30.5 mm x 32 mm. I have looked at the Gibson coupling rods section as a guild, but drawn a blank. The frames do look like Gibson milled ones Has Gibson type 20 mm wheels and I would guess its a tender loco owing to the rear wheels being so close to the rear of the frame and no space for guard irons I am just about to embark on a GWR/SR EM gauge layout so it might come in handy. The chassis seems to be well built as a flexi chassis, If I have trouble quartering the wheels I could easily swap them for Romford's At worst I could keep the motor and it sell on eBay Thanks in advance Link to post Share on other sites More sharing options...
Earlswood Nob Posted August 2, 2016 Share Posted August 2, 2016 Good morning all If LNER it is possibly a J36 which had 7'6+8'0 wheelbase. I have little knowledge of the other three Big Four companies. Earlswood nob Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.