RMweb Premium Popular Post airnimal Posted June 22, 2020 Author RMweb Premium Popular Post Share Posted June 22, 2020 I didn't get a lot done yesterday because we had a social distanced visit from our youngest daughter with a couple of grandsons. So so today after doing a bit of house work to earn a few brownie points I added the details on one end and made a start on the bolster which just leaves the other side and end to do. Looking at the photographs I need to change the retaining strap holding the axleboxes in place because the N.S.R had drop down ones on this wagon. I have looked at photographs of other N.S.R wagons and they don't have this feature. There is still plenty to do yet but as the weather is getting better this week I might not get a lot done because I am going to get out on my bike and enjoy the sunshine. 13 8 Link to post Share on other sites More sharing options...
Caley Jim Posted June 22, 2020 Share Posted June 22, 2020 Stunning as always, Mike. Jim 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post airnimal Posted June 23, 2020 Author RMweb Premium Popular Post Share Posted June 23, 2020 (edited) Well the weather isn't the bright sunshine as yet so instead of going out on my bike I have done a little more on the bolster. I turned the stanchions from brass and I have soldered on a bracket for the chains on one of them. Now I have to see if I can make another one to match as good ? Edited June 23, 2020 by airnimal 10 11 Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted June 23, 2020 RMweb Gold Share Posted June 23, 2020 Every day is an inspiration. Such a superb quality of work on this thread I look forward to reading it. 8 Link to post Share on other sites More sharing options...
Tricky Posted June 23, 2020 Share Posted June 23, 2020 On 20/06/2020 at 22:13, Argos said: Hi Tricky, I find those PCB drill bits very brittle and snap at the slightest provocation, this effect is exacerbated by the fact are aggressively fluted so tend to "grab" and pull the bit into the hole. I do use them in hand drill though. Proxxon make some nice shanked drill bits that retail at less than £4 for a box of three (same size) but not all diameters are available, Tamiya also market some down to 0.2mm diameter although these are more expensive for single bits. Yes, totally agree they are brittle - one little catch and they’re gone. But I suppose at the price they are fairly ‘disposable’. 2 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 24, 2020 Author RMweb Premium Share Posted June 24, 2020 The fine weather is with us once again so I have not done a lot modelling wise. I have fixed a children's bike and musical roundabout to keep the grandchildren happy and be in the good books at home. The body of the single bolster wagon is finished so it's down to the running gear and brake. I had a look at using one of my own castings from my brake van kit but there are the wrong shape. I could have modified one but it seems as shame to butcher a complete casting only to use half of it., So I have cut a new brake block from an old brass door plate. This was found in the shed and stored many years ago because it's 70 thou thick and lovely and flat. I have several bits of metal in stock and they always come in useful even if it's many years down the line before I use them. Are we all hoarders at heart ? 5 1 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 24, 2020 Author RMweb Premium Share Posted June 24, 2020 *** WARNING*** Do not try to use a gas torch anywhere near a plastic model ! I was doing so well getting on with the brake gear so I thought I would use the gas torch to solder it all together. Perhaps the sun has got to me because I was sure I had moved the model out of the way. Clearly I was wrong. I suppose it could have been worse because if I rub the burnt bit down and replace the bolts I may get away without scrapping the whole wagon. Lesson leant I hope ! 5 10 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted June 24, 2020 RMweb Premium Share Posted June 24, 2020 That looks like a bit of everyday wear and tear from here. 7 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 24, 2020 Author RMweb Premium Share Posted June 24, 2020 I have managed to retrieve the situation without to much damage with just 4 bolts melted and replaced. The scorched side has been rubbed down and hopefully will not be to bad when painted but it could have been worse. The offending brake block has been a success after all the drama. When people say they have had a meltdown were they refeering to me ? 12 7 Link to post Share on other sites More sharing options...
RMweb Premium Dave Hunt Posted June 25, 2020 RMweb Premium Share Posted June 25, 2020 Another stunner nearing completion Mike. I was going to say hot stuff but then had second thoughts............ Dave 1 2 2 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 25, 2020 Author RMweb Premium Share Posted June 25, 2020 After the hiccups yesterday I have done a bit more this morning without burning anything down. I have only the brake handle and rack to do and then I can paint at last. I cut out the axleboxes retaining straps which are an unusual shape. I soldered 4 bits of nickel together and cut them out as one. I think they do make a difference to the appearance of the wagon. 10 7 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 26, 2020 Author RMweb Premium Share Posted June 26, 2020 After all the mistakes including putting the label clip in the same location on both sides which was wrong I have finally got to the painting stage. Even having photos of both sides I failed to notice the label clip on the brake side had been moved to fit the brake rack. At least I noticed before I started painting which was a bonus. So I have prepared all the parts after cleaning and blackening the metal bits. A quick 30 minutes with the rattle cans before the rain appeared was time enough to get to the stage you can see here. I borrowed some better wheels from a finished wagon which I will have replace. 7 11 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post airnimal Posted June 26, 2020 Author RMweb Premium Popular Post Share Posted June 26, 2020 Hopefully I will be able to complete this wagon this weekend. Still lots of loose ends to tidy up and finish the lettering but there is light at the end of the tunnel. 19 10 Link to post Share on other sites More sharing options...
kitpw Posted June 26, 2020 Share Posted June 26, 2020 ....no sign of heat damage, only some wear and tear from "loads in service" - another first rate model. Kit PW Swan Hill - https://www.rmweb.co.uk/community/index.php?/blogs/blog/2502-swan-hill/ 5 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 27, 2020 Author RMweb Premium Share Posted June 27, 2020 ....no sign of heat damage ? It has nearly been chucked on the fire several times these past couple of days ! So much for saying I have a photo of each sides so I should not have any excuse for getting things wrong. The label clips were moved because I thought I had them both in the wrong place when only one of them was in fact wrong. I missed completely I had put the brake gear on the wrong side. Could I live with this stupid error ? Of course not it would forever eat away at me ever time I looked at it. So last night when our neighbors daughter and her friends were having a birthday party right outside my bedroom window, I put right the brake gear issues. My wife can sleep through anything but a dozen 23 year olds merry on Vodkas and with a healthy disco turned up loud didn't make for a good nights sleep. So so this morning when looking at where to put the chalk marks on another glaring error jumps out at at me. I spaced the N.S.R to far apart. More work. I won't win any prizes for my observational skills I think I have got it right at last. Onwards to the finish I hope..... 9 4 3 Link to post Share on other sites More sharing options...
RMweb Premium Dave Hunt Posted June 27, 2020 RMweb Premium Share Posted June 27, 2020 It's still a cracker Mike. Stop beating yourself up. Dave (who has never made a mistake when making a model in his life....??) 3 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 28, 2020 Author RMweb Premium Share Posted June 28, 2020 Quote There are a couple of bits to do but it's more or less finished. I started on the 18th and now it's the 28th so 10 days work for a small wagon. Obviously I didn't work on it every day but there has to be about 60 hours in it. Was it worth it ? What to do next ? There are still about 10 wagons that need finishing / painting in my workshop as well parts galore hanging around. I don't have a good track record using kits so the G.W.R Cooper Craft parts I have don't excite me much. I feel we have been left in limbo wating for the lockdown to ease so we can go and look at a house move. If we don't get a move on soon I feel it will be to late and we will end up staying here and the railway will never get built. Perhaps thinking that way I should order some baseboards and just get on with it ! 12 2 Link to post Share on other sites More sharing options...
RMweb Premium Andy Hayter Posted June 28, 2020 RMweb Premium Share Posted June 28, 2020 Was it worth it? Really only you can answer that, but in my eyes it most certainly was worth it. You are working as fast if not faster scratch building wagons in O than I am making kits or semi scratch building in OO. So was it worth it? Oh yes. 3 Link to post Share on other sites More sharing options...
Caley Jim Posted June 28, 2020 Share Posted June 28, 2020 51 minutes ago, airnimal said: Was it worth it ? I agree entirely with @Andy Hayter. A result as good as that is always worth the effort 55 minutes ago, airnimal said: Perhaps thinking that way I should order some baseboards and just get on with it ! Definitely! Procrastination is the enemy of progress! Jim (whose never got round to joining the Procrastination Society) 2 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted June 28, 2020 RMweb Premium Share Posted June 28, 2020 Funnily enough I’ve just been looking at a Cooper Craft wagon I made up some time ago, but made wider with new ends as a broad gauge job. It looks nice enough, but the tops of the sides are all banana shape in plan view, maybe they don’t like Mekpak. Something will have to be done, keep the lower half and rebuild the top. Your NSR bolster shows the time and care spent on it for a quality job. 2 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post airnimal Posted June 28, 2020 Author RMweb Premium Popular Post Share Posted June 28, 2020 Many thanks for kind comments, It is appreciated. I forgot the ends of the buffers that I made as a separate piece to go on after the painting was complete. Rarther than cut in to the frame to put the iron retaining straps on, I cut 4 pieces from black plastikard with the corners rounded off and painted body colour on one side. I then cleaned the paint off the edge to leave just the black showing. These were then glued on so they look like they have the iron band around the end of the frame. These pieces look smaller than the frame. That's not a mistake on my part they are like that on the prototype. 14 8 Link to post Share on other sites More sharing options...
RMweb Gold Regularity Posted June 28, 2020 RMweb Gold Share Posted June 28, 2020 Very, very nice, Mike. But didn’t these tend to run around in pairs? 4 Link to post Share on other sites More sharing options...
Tricky Posted June 29, 2020 Share Posted June 29, 2020 20 hours ago, Regularity said: Very, very nice, Mike. But didn’t these tend to run around in pairs? Uh-oh. 4 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted June 29, 2020 RMweb Premium Share Posted June 29, 2020 21 hours ago, Regularity said: Very, very nice, Mike. But didn’t these tend to run around in pairs? One might be worked singly to a station where three were needed to convey a long load. 3 1 Link to post Share on other sites More sharing options...
RMweb Premium airnimal Posted June 29, 2020 Author RMweb Premium Share Posted June 29, 2020 Good job I have ordered 10 sets of wagon wheels from Slaters then ! 7 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now