Industrial Cabside Numberplates in 4mm

[jukebox]

I'm looking for a source for oval cabside numberplates to add to an industrial tank loco I am building. I'd like something similar to this:

 

 

The oval shape and ornate font are what I'm chasing - preferably in low numbers - below 10 would be best, but below 100 would still do.

 

(of course the LB&SCR is not relevant, but in 4mm would scarcely be ledgible, so even a source for these would be fine).

 

Can anyone suggest a manufacturer/supplier/stockist?

 

Cheers

 

Scott

[Kits from Somerset]

They are listed in my 1990 Jackson Evans cat, not shore if they are still around closed down or taken over. Somebody will be able to tell you that.

[ianmaccormac]

 

Hi,

These are what I produce. These are 4mm scale.

4mm high for the North British one and 4.5 for the LB&SCR one.

I can etch for you if you like at 11 pounds for 2 numbers of the same style incl p and p if you send me photos or details/drawings, with an about three week turnaround or I have

some numbers in stock at the mo.

HTH

Ian MacCormac in Blackpool

[Portchullin Tatty]

A good source is Guilplates:

 

GuilPlates,

32 Wodeland Avenue,

Guildford,

Surrey GU2 4JZ

Tel: 01483 565980/563156 Fax: 01483 565980 (office hours only)

Email: guilplat@globalnet.co.uk

 

Gareth will do pretty much whatever you want.