RMweb Gold Andy Ross Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 (edited) As part of my Hunslet project (See link at bottom of page) I have been producing etches for several Hunslet Locomotives during different parts of the build process in the works in 7mm scale. Because of what they are intended for they have been drawn almost the same as the originals including all cut outs and internal details, and component parts, such as fuel tanks and air reservoirs, etc. One of the these loco types is the later Bord na Móna locos that were built in the 80's. I have done changes to the etches so I can build one of these up at 21mm gauge to run up and down the yard but it would still not be complete and pretty much as the photos below. Yes it still needs wheels. I am considering doing taking some of the drawings I have done and making these into a basic kit but it would be quite involved and there is the issue of mechanisms, casting etc. to get over. Although I have never produced a kit before I have several friend who have so I know I could get some help if needed. I am not saying I would definitely do this but I would be interested in how much interest there would be if I was to invest the time. Also what gauge would be preferred This is just to get a feel and I am not going to hold anybody to this they say they are interested and there is no time scale at this stage. Thanks in advance Andy R Edited March 12, 2021 by Trams and Locos Spelling Correction 3 2 Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted March 11, 2021 RMweb Premium Share Posted March 11, 2021 Looks great. I’ve long wanted one of those for my 0-16.5 layout and would be very interested in having one or two. While I can build kits, building chassis is beyond me. I suggest you mention your potential kit to the 7mm Narrow Gauge Association. Someone in it might know of a RTR chassis that would fit. Link to post Share on other sites More sharing options...
laurenceb Posted March 11, 2021 Share Posted March 11, 2021 Mark Clark of Locos n Stuff does bepoke motor bogies https://www.locosnstuff.com/Motor-Bogie-and-Chassis-kits.php 1 Link to post Share on other sites More sharing options...
RMweb Gold Andy Ross Posted March 12, 2021 Author RMweb Gold Share Posted March 12, 2021 The problem is that the loco is 38mm wheel base and looks like Marks only go up to 35mm. Black Beatles look like they went to 38mm but they do not appear to be available at the moment. Link to post Share on other sites More sharing options...
Nearholmer Posted March 12, 2021 Share Posted March 12, 2021 7mm/ft ..... I probably couldn’t resist! Having enjoyed so many visits to BnM lines over the years, a souvenir would be marvellous, even if it is a bit small - I have a Wagonmaster, but that is 15mm/ft. 1 Link to post Share on other sites More sharing options...
RMweb Gold Andy Ross Posted March 28, 2021 Author RMweb Gold Share Posted March 28, 2021 See latest photos below - I have recently cracked some basic 3d drawing and a friend with a printer has done the air filter housing and exhaust silencer and they really add to whats been done so far. 3 2 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now