pteandy1402 Posted March 19 Author Share Posted March 19 Orange cantrail added to the roof, just need to draw and print the little white aerials for the rod and print some of the electrical cable connectors for the ends. Using dcc concepts axle pickups for the decoder and using a Hornby lighting strip and lokpilot decoder. 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 19 Author Share Posted March 19 My landrover road railer conversion with its first coat of network rail yellow need to draw the roof rack, box on the front bumper and side steps 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 19 Author Share Posted March 19 The 153 viu getting its yellow ends and the 3d printed parts getting a coat of yellow. 4 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 19 Author Share Posted March 19 Coast of blue and roof grey done on 153376 4 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 22 Author Share Posted March 22 Nearly there decalling the 153376 network rail test train. Using railtec Decals and Microsoft to get over the rivets. Picking out little details in various colours to add interest. Legomanbiffo sound to go in just deciding on a speaker as I'm hoping to house it inside a because that goes inside I'm hoping to print. Half way through this video there is inside the train 6 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 23 Author Share Posted March 23 Started to draw the basics of the interior with speaker enclosure a the generator need to add batteries, computer racks, kitchen and seats Link to post Share on other sites More sharing options...
pteandy1402 Posted March 23 Author Share Posted March 23 12 outputs used in total including the 2x standard light outputs for the various lighting. Each end Day Headlight Night Headlight BiMode Marker lights BiMode Tail lights Cab light Interior lighting Under chassis track scanning spotlights I am using a ESU loksound v5 with legomanbiffo sound Link to post Share on other sites More sharing options...
LMSfan72 Posted March 23 Share Posted March 23 I think that’s what I did too. I used the ESU 150 sound file. Link to post Share on other sites More sharing options...
LMSfan72 Posted March 23 Share Posted March 23 Although I think I skipped the interior as I didn’t like mine! I’ll be keen to see how it turns out Link to post Share on other sites More sharing options...
pteandy1402 Posted March 23 Author Share Posted March 23 4 minutes ago, LMSfan72 said: Although I think I skipped the interior as I didn’t like mine! I’ll be keen to see how it turns out The generator is slightly over scale to fit the speaker in but from viewing through the windows you won't be able to tell. Will drill holes in the chassis and weights to allow sound out but will look better than just seats. Link to post Share on other sites More sharing options...
pteandy1402 Posted March 24 Author Share Posted March 24 All the decals added moving onto the electrics now adding different lighting modes, scanning lights and internal lights. 3 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 8 Author Share Posted April 8 Nearly finished 62384 UTU1 coach to run with my network rail rake on making tracks the final frontier. A combination of a Bachmann mk1 and the Brittania Pacific kit. 3d printed parts drawn by myself and printed by chris at the club. Decals by Railtec. Will be eventually fitting interior but for now will be fitting syrup lights on the chassis and spot lights to ban on the track and interior strip light. DCC concepts spring pickups provide the power to lokpilot decoder. Using Accurascales idea for removable roof I've used magnets to make the roof be able to be removed too service decoder and add interior. 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 8 Author Share Posted April 8 Bit more done on the viu 153 using the video done on how it was designed and made on YouTube I was able to draw the interior that has a generator in it which will house the speaker. Cupboards will hide the decoder and using 3d parts that came with the kit I'm adding independent lighting with all the lighting modes available including spot lighting onto the track. 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 8 Author Share Posted April 8 Network rail autoballaster nearly there, just little bit of weathering to add. Upgraded the servo to a higher torque servo from spectrum. It uses a 5v buck convertor or usb convertor to drop a function output from 12v down to 5v needed for a servo. Another output from the lokpilot is configured as a servo output to open the ballast chute allowing ballast to slowly pour. I've also added the working lights along the bottom that work on a function. 2 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 18 Author Share Posted April 18 All the lighting added to the Network Rail 153376 VIU, interior added and painted, speaker added, track advances with lights added. Night and day headlight modes, yard mode, bimode markers and tail lights. Cablights and interior light 6 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 18 Author Share Posted April 18 Legomanbiffo sound with a speaker I got a while ago from roads and rails will try and get a video in the next few days. Now fitting the lighting to Network Rail UTU1 62384 test coach to go in my rake. 4 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 20 Author Share Posted April 20 Railtracks 960011 by Dapol that I've upgraded with cameras and floodlights repaired ready for the NEC running legomanbiffo sound and a em1+ sugarcube 5 Link to post Share on other sites More sharing options...
pteandy1402 Posted April 20 Author Share Posted April 20 Little taster of something new and another lad and a chap from America having been working on. Also got the same thing but designed by CMAC models that I'm painting 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted May 21 Author Share Posted May 21 Colas Class 66847 Terry Baker by Hattons that I'm working on. Adding nameplates, replacing the old hat logos with the diamonds, weathering, adding a em2 speaker and sugarcube that comes out of the exhaust. Lifecolour weathering colours and washes. Legomanbiffos sound , fixed the wobble by opening up the bogie holes and reglueing all the axle bearings on straight. Will run as a fixed rake with some network rail autoballasters and another colas 66 6 Link to post Share on other sites More sharing options...
pteandy1402 Posted May 26 Author Share Posted May 26 Ian aka Legomanbiffo kindly sent me his latest soundfile for the excellent Cavalex Colas Class 56. It sounds great and will hopefully get some running shots of it on making tracks through Watford. Little short video of it on Flickr once weathered out will ruin with some network rail wagons in a rake 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted May 26 Author Share Posted May 26 Been using the ammo chipping fluid you paint the base rust colour on light it dry, chipping fluid, then acrylic colour to match the buff colour let that touch dry then scrub it off leaving patches like the paint has peeled off, more weathering to add. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now