Digitrax DS64 and Peco PL10

[Geoff_Borders]

Hi,

 

I have tried the Ds 64 with track power and aux power/loconet and still find the switch only goes one way. I’ve tried different pl10s and 2 DS64s. I’ve been controlling the DS64s with JMRI and I use a Digitrax Dcs 52.

 

I’ve merrily followed the Ds64 manual for Peco solenoid motor.

 

has anyone come across anything like this?

 

thanks for any thoughts.

 

Geoff

[smokebox]

Have you got the common connection of the point motor connected to the correct terminal of the DS 64?

[Geoff_Borders]

Thanks smokebox but no luck. I have a black wire across two of the pl10  solder points and the other two carry the current. On the DS64 the black goes to the common and the other two got to the point connections. I've ordered another pl10 to test that. I'll be back with photos if that doesn't work.

[richard brown]

Have you tried a different output. Also is the ds64 working I had one which did not work on loconet but did on dcc

[Geoff_Borders]

Thanks all. It seems to have been a bad connection as track power passed through a connector on way to ds64..