Some useful worker figures

[PhilH]

I came across these files while looking for figures for a diorama. They are for manual labourers and could be useful for some different scenarios. They are sized for n scale but scale up nicely. I’ve printed them for 1/35 and am pleased with the results. I printed them using abs like resin which is my go to now, not so brittle as standard.

 

https://www.thingiverse.com/thing:5441402

[Carlislecitadel2]

Thanks or the link Phil

[eldavo]

Good spot Mr Harding.

 

Cheers

Dave

 

[PhilH]

A quick update, a photo of one of the above figures scaled up to 1/35. The diagonal lines are totally invisible to the naked eye. They were printed on my mono X, all 16 on the build plate at the same time and cost about 90p total for all 16. As can be seen my support removal skills are somewhat lacking….

Edited April 19, 2023 by PhilH

[bradfordbuffer]

On 19/04/2023 at 09:44, PhilH said:

A quick update, a photo of one of the above figures scaled up to 1/35. The diagonal lines are totally invisible to the naked eye. They were printed on my mono X, all 16 on the build plate at the same time and cost about 90p total for all 16. As can be seen my support removal skills are somewhat lacking….

You where only ment to take the bloody supports off! ....not the bloody spokes!....all done in a Michel cane accent