josekimber Posted June 16, 2023 Share Posted June 16, 2023 Please can anyone help to find out how to adjust the volume of the factory sound fitted Dapol Manor? It is not listed in any of the functions. I mainly run the loco on our large club layout and the sound is barely audible, while other sound fitted locos seem to work much better. The manual says it is a Zimo Sound decoder but does not specify which one or which sound files they are using. Thanks Jose Link to post Share on other sites More sharing options...
pauliebanger Posted June 17, 2023 Share Posted June 17, 2023 The master volume CV on all ZIMO sound decoders is CV266. Typical value is around 64, useful up to say 120 but maybe some distortion. Paul Link to post Share on other sites More sharing options...
josekimber Posted June 17, 2023 Author Share Posted June 17, 2023 Thanks for that, Paul. Do you know if it is possible to assign this to a function button, and if so how I would do it? There are some functions I will probably never use that could be used for this if it is possible to do it. Regards Jose Link to post Share on other sites More sharing options...
pauliebanger Posted June 18, 2023 Share Posted June 18, 2023 Many sound projects already have a down volume key and an up volume key, depends what Dapol specified. Mine usually have these on F 27 and F28 respectively. CV 395 sets max volume. Don't exceed 120 here. CV396 = 27 CV397 = 28 Sets the F keys You'll need to remove what is already on you chosen keys as they will still be active otherwise. Paul Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now