Daniel43163 Posted August 14, 2011 Share Posted August 14, 2011 Hi All! Ive spent the last hour or so fitting the snowploughs to my new Heljan 33 with great success!. Below are some photos to show what went on . As you can see.. first image shows the end of the class 33. Remove the body and then remove the buffer beam by pulling on both sides.. it will unclip.. take care not to break the small clips on the back to hold it into the chassis.. One you have removed the buffer beams.. i have found that if you pull on the NEM pocket, they unclip! leaving enought space for the snowploughs to be fitted without the bogie catching them!. Once this has been done.. the Ploughs can now be fitted to the back of the buffer beams. They should slot into two holes in the back of the beam ( these may need to be opened out abit!). One they have been glued into place! they can now be fitted back onto the chassis!. and HEY PRESTO! it works Here it is on my Layout! Now to fit the sound! 3 Link to post Share on other sites More sharing options...
mikesndbs Posted June 23, 2019 Share Posted June 23, 2019 Looks great, can you just confirm how to remove the NEM pockets please? Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now