rikbrik Posted February 12, 2012 Share Posted February 12, 2012 Hi there here goes my first post so be gentle, Ive made a small test set up to try out a cobalt point motor with the ad1 decoder fitted, by following the instructions (page 3)on the dcc concepts web site to wire it up for DC use only ( at the moment ). The problem i have is that the switch will not move the point motor at all when pressed. Ive double checked the wiring and the soldering all ok, the led's are 12v and work ok. The point motor works fine when wired up to a 9v battery. The switch also works ok when wired up to a 9v battery and an led. To me the problem seems to be the switch on the ad1 has anyone had the same problem, or have any ideas about what i could do thanks rikbrik Link to post Share on other sites More sharing options...
Neil Rogers Posted February 12, 2012 Share Posted February 12, 2012 i've only tried using them under dcc! have you got the 12v feeds +/- round the right way? Neil Link to post Share on other sites More sharing options...
rikbrik Posted February 12, 2012 Author Share Posted February 12, 2012 hi neil, yeah have tried them the other way round with no success rikbrik Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.