-missy- Posted April 30, 2021 Share Posted April 30, 2021 Teeny Tiny Wagon Bogie now... Wheels next..... Julia. 9 6 Link to comment Share on other sites More sharing options...
Yorkshire Square Posted April 30, 2021 Share Posted April 30, 2021 3 hours ago, -missy- said: Teeny Tiny Wagon Bogie now... Wheels next..... Julia. I was going to ask if the wheels on the truck go round and round... 3 Link to comment Share on other sites More sharing options...
-missy- Posted April 30, 2021 Share Posted April 30, 2021 (edited) 1 hour ago, Yorkshire Square said: I was going to ask if the wheels on the truck go round and round... Depends if they are spoked wheels or solid ones. Julia :p Edited April 30, 2021 by -missy- english 1 2 Link to comment Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted May 1, 2021 RMweb Premium Share Posted May 1, 2021 Reg, the Freshwater delivery driver, is about to start delivering the Luggage in Advance (LIA) to the hotels and boarding houses around Totland Bay. He is really happy that his Morris PV van finally has some glass in the windows. At last, off my workbench and fixed to the layout, I painted this white metal model maroon and cream over 12 years ago. I glazed it this week with some clear plastic from a tray of exceedingly good cakes. Then I did a little online research and found that the roof was canvas, and should be grey, and that the mud guards were almost invariably black. Also, the wheels were sticking out too far, so I had to cut them off, shorten the axles and glue them back. After a little touching up, addition of some number plates (DL for Isle of Wight) and a 12BA bolt to stick into the ground, it finally has a permanent place on the layout. I know that the Southern Railway had very few motor vehicles, and have no idea if a Morris PV van ever wore British Railways livery, but I have not yet found out how LIA was distributed. Therefore, Rule 1 applies (until I get told at the next exhibition). 16 1 Link to comment Share on other sites More sharing options...
Sam Kennion Posted May 2, 2021 Share Posted May 2, 2021 On 29/04/2021 at 19:24, -missy- said: Teeny Tiny Wagon Chassis... Had to make my own bending jig for it... Julia 'Want one!' Well, I don’t want just ONE, I want several please! What wheelbase are they and what gauge? What wheels are you going to use with them? Sam Link to comment Share on other sites More sharing options...
2mm Andy Posted May 2, 2021 Share Posted May 2, 2021 5 hours ago, Sam Kennion said: 'Want one!' Well, I don’t want just ONE, I want several please! What wheelbase are they and what gauge? What wheels are you going to use with them? Sam If you don't know the gauge, the wheelbase and what wheels fit them, how do you know that you definitely want some...? 1 2 1 Link to comment Share on other sites More sharing options...
Sam Kennion Posted May 3, 2021 Share Posted May 3, 2021 (edited) On 02/05/2021 at 17:43, 2mm Andy said: If you don't know the gauge, the wheelbase and what wheels fit them, how do you know that you definitely want some...? Educated guess on the gauge (and the rest). I'm fairly sure they'll be useful. Edited May 3, 2021 by Sam Kennion Link to comment Share on other sites More sharing options...
Yorkshire Square Posted May 3, 2021 Share Posted May 3, 2021 On 02/05/2021 at 17:43, 2mm Andy said: If you don't know the gauge, the wheelbase and what wheels fit them, how do you know that you definitely want some...? 7mm coarse scale broad gauge. Displayed on a beautifully modelled overscale finger... 5 Link to comment Share on other sites More sharing options...
Sam Kennion Posted May 3, 2021 Share Posted May 3, 2021 1 hour ago, Yorkshire Square said: 7mm coarse scale broad gauge. Displayed on a beautifully modelled overscale finger... It's in the wrong forum then! I can still use them then, on the garden railway! 1 Link to comment Share on other sites More sharing options...
RMweb Gold Argos Posted May 3, 2021 RMweb Gold Share Posted May 3, 2021 (edited) I've not done much modelling of late but have decided I need to finish some of the models I have hanging around and cluttering the workbench. To that end the primer was broken out The eclectic mix probably explains why my modelling sometimes lacks focus and gets derailed! From left to right, a Midland Railway van, a BR plywood vent van, two LMS vans, a LNER fish van, a MGWR horsebox (Irish, photo'd in a relatively recent 2mm scale association magazine}, a MGWR fish van, a LMS open wagon, a Caledonian Railway open wagon and finally a CB&SCR open wagon (Irish, a kind gift from a fellow 2mm modeller). Edited May 3, 2021 by Argos 19 Link to comment Share on other sites More sharing options...
RMweb Premium Izzy Posted May 4, 2021 RMweb Premium Share Posted May 4, 2021 The level crossing has finally been installed. Getting the gates and posts to line up wasn't as easy as I had hoped. As you can see there is an awful long way to go, please forgive the crudeness of it all, but the layout works, which is the main thing, and power is cut to the track around the crossing when it is closed. Or rather open to road traffic. There will be a semaphore signal eventually, and hopefully interlocked with the gates. But the standard hacked servo design I now use for points may be a bit too fast so experiments are under way to see what I can come up with that fits with the power and control arrangements used. 12 1 Link to comment Share on other sites More sharing options...
Nigelcliffe Posted May 4, 2021 Share Posted May 4, 2021 (edited) 7 hours ago, Izzy said: The level crossing has finally been installed. Getting the gates and posts to line up wasn't as easy as I had hoped. As you can see there is an awful long way to go, please forgive the crudeness of it all, but the layout works, which is the main thing, and power is cut to the track around the crossing when it is closed. Or rather open to road traffic. There will be a semaphore signal eventually, and hopefully interlocked with the gates. But the standard hacked servo design I now use for points may be a bit too fast so experiments are under way to see what I can come up with that fits with the power and control arrangements used. A simple Geneva drive - disc underneath, swinging each gate in turn. As used on Coldfair Green, video below, mechanism built by John Watson. Needs a simple DC motor to rotate it. End stops are microswitches with diodes (to allow reversing away from the stop). Control is DPDT switch (open/close). Get the motor gearing so the disc rotates at a sensible speed and the gates will move beautifully - starting slowly, fastest in the middle, and slowing as they reach 90 degrees. The drive pins need some fine-pitch adjustment of radius, hence in short slots in the disk, so they correctly move the gate controls through 90 degrees. ( Ignore the relays to the side, they're used to interlock signalling and information to a remote control panel. ) Edited May 4, 2021 by Nigelcliffe 8 3 Link to comment Share on other sites More sharing options...
RMweb Gold tapdieuk Posted May 11, 2021 RMweb Gold Share Posted May 11, 2021 (edited) A break from wagon building with a B6 Easitrac pegged point with machined frog, my first point. Tonight's job file the point blades Edited May 11, 2021 by tapdieuk Photo link edit 15 Link to comment Share on other sites More sharing options...
richbrummitt Posted May 17, 2021 Share Posted May 17, 2021 2nd round of prints of axle boxes with springs. The gap between solebar and component has closed up (top) compared with the first (bottom) but version 3 will be required at least. My hasty updating of the CAD meant that there is an error in the change that I made. 10 Link to comment Share on other sites More sharing options...
richbrummitt Posted May 18, 2021 Share Posted May 18, 2021 These ones I am happier with. The others are in the bin to avoid getting mixed up. 6 1 Link to comment Share on other sites More sharing options...
Sithlord75 Posted May 18, 2021 Share Posted May 18, 2021 Is that a cobbled chassis you've got under there or a "shop brought" one? Link to comment Share on other sites More sharing options...
richbrummitt Posted May 18, 2021 Share Posted May 18, 2021 1 minute ago, Sithlord75 said: Is that a cobbled chassis you've got under there or a "shop brought" one? Both. I cobbled a 2-363 and something brake lever shaped that looked the right size with a part from a 2-361 that will no longer be possible to build as DC1. 1 Link to comment Share on other sites More sharing options...
Sithlord75 Posted May 19, 2021 Share Posted May 19, 2021 Not so much as on the workbench but on the dining room table (more space) showing the Shop 2 order which arrived today for members of the SEQAG. Should keep us busy for a couple of weeks...... 7 Link to comment Share on other sites More sharing options...
RMweb Premium 65179 Posted May 19, 2021 RMweb Premium Share Posted May 19, 2021 21 minutes ago, Sithlord75 said: Not so much as on the workbench but on the dining room table (more space) showing the Shop 2 order which arrived today for members of the SEQAG. Should keep us busy for a couple of weeks...... Wasn't the remaining worldwide stock of NGS LMS brake vans enough ?! Simon 5 Link to comment Share on other sites More sharing options...
Sithlord75 Posted May 20, 2021 Share Posted May 20, 2021 Thursday night knitting club tonight - back at my place after two weeks of being at @nebnoswal's. We made a start on the collection which turned up from Shop 2 earlier this week. I'd have made more progress but for an enjoyable half hour chatting with @John Brenchley in WA. Another chassis for a RCH 1907 7 planker, a 8'6" chassis for a SDJR Horsebox and a 9'6" chassis for the LBSC wagon (body in place to check the fit). Neb got a chassis built to go under his SDJR Cattle wagon. 5 Link to comment Share on other sites More sharing options...
Popular Post Klaus ojo Posted May 21, 2021 Popular Post Share Posted May 21, 2021 (edited) This little class 02 shunter is a Worsley Works kit I´ve built during last months with addition of 2mmSA wheels and other parts. It comes with chassis but without a gearbox. As it is one of my first attempts of a loco with chassis it is looking a bit freestyle. However, I am slightly proud that it is running now after changing to that little black 6x12mm coreless motor. ( Julia, thanks for this and other hints!) With a slightly bigger motor I had mounted before I did not manage to add enough weight to ensure rail contact. Maybe it needs a bit more refurbishing, new painting and weight and possibly a DCC decoder. But all that must wait for after the SEQLAG 2021 challange: There are already many pretty trains almost finished and I´d like to see my own train finished in time as well... Edited May 21, 2021 by Klaus ojo typo 21 3 2 Link to comment Share on other sites More sharing options...
RMweb Gold TomE Posted May 22, 2021 RMweb Gold Share Posted May 22, 2021 Not quite on my workbench yet but heading that way are these test etches for the balustrades on the former Kings Cross footbridge, now at Ropley. These will be used in conjunction with the 3D printed parts to make up the stair sections. Now I know they are a realistic prospect for etching (they're only 6.64mm tall!) the full sides can be produced. Thanks to @Pixie for chucking them on a spare section of etch! 6.64mm tall!! Tom. 14 1 Link to comment Share on other sites More sharing options...
Popular Post JohnBS Posted May 25, 2021 Popular Post Share Posted May 25, 2021 (edited) Hi all, Well, I haven’t managed to get to grips with my larger layout - Totnes - as it is in storage in Wells, fifteen miles away, and, in these times of plague, it has been impossible to get over there. However, I’ve been gently pegging away at a stand alone model. It's hardly the Quinquereme of Nineveh but rather a coaster unloading timber from Danzig for Reeves at the Totnes quayside. It started life as the Scalescene kit T030 Cargo Ship, but antedated to be a steam-driven ship from the 1930s, rather than a diesel-powered ship from the 1950s. Scalescenes T030 Cargo Ship as intended. "Baltic Adventurer" as modified. She now has a much bluffer bow, hold positions moved to give space for the central winch, derrick and booms, bridge changed, a tall smokestack (salt-caked?), ventilators and a skylight to the engine room, a single lifeboat and a catboat on the davits and cargo, basic rigging and portholes. The ship will be in the middle distance on the layout so is intended to be a sketch rather than an exhibition model. So all I now need to do is unite the ship with the layout - I am looking forward to it. Best wishes to you all, John Edited May 25, 2021 by JohnBS Correction 19 6 1 Link to comment Share on other sites More sharing options...
RMweb Gold queensquare Posted May 25, 2021 RMweb Gold Share Posted May 25, 2021 13 minutes ago, JohnBS said: Hi all, Well, I haven’t managed to get to grips with my larger layout - Totnes - as it is in storage in Wells, fifteen miles away, and, in these times of plague, it has been impossible to get over there. However, I’ve been gently pegging away at a stand alone model. It's hardly the Quinquereme of Nineveh but rather a coaster unloading timber from Danzig for Reeves at the Totnes quayside. It started life as the Scalescene kit T030 Cargo Ship, but antedated to be a steam-driven ship from the 1930s, rather than a diesel-powered ship from the 1950s. Scalescenes T030 Cargo Ship as intended. "Baltic Adventurer" as modified. She now has a much bluffer bow, hold positions moved to give space for the central winch, derrick and booms, bridge changed, a tall smokestack (salt-caked?), ventilators and a skylight to the engine room, a single lifeboat and a cutter on the davits and cargo, basic rigging and portholes. The ship will be in the middle distance on the layout so is intended to be a sketch rather than an exhibition model. So all I now need to do is unite the ship with the layout - I am looking forward to it. Best wishes to you all, John Wonderful stuff John. I saw Totnes last night, my first visit to the club under the rule of six for months - fingers crossed we can get back down there at the end of June. The layout was safe and well, Laurie G and I had a quick peak under the dust sheet. i have my second jab this coming Saturday and am long overdue a visit to 'me Julie' to sort my hair out so will call in. Jerry 1 Link to comment Share on other sites More sharing options...
RMweb Gold Donw Posted May 25, 2021 RMweb Gold Share Posted May 25, 2021 Nice bit of work John. Don 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now