bob hughes60 Posted June 18, 2013 Share Posted June 18, 2013 I have desoldered the pin in the photograph so I now have one red lead from RH side pickup to capacitor and one black LH side pickup to capacitor. What I would like to do is fit a Hornby PCB (shown in photo) and blanking plate so the model is DCC ready. The decoders I have are not wired up. Essentially I need some nice kind person to tell me or direct me to a blog which shows which wires go where on the PCB and which way is front on the PCB? Manty thanks Bob Hughes Link to post Share on other sites More sharing options...
smokebox Posted June 18, 2013 Share Posted June 18, 2013 Orange wire from motor to pin 1Black wire from pickups goes to pin 4Grey wire from motor goes to pin 5Red wire from pickups goes to pin 8Socket viewed from above.1 ----- 82 ----- 73 ----- 64 ----- 5 Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.