richard-g8jvm Posted September 7, 2013 Share Posted September 7, 2013 Hi, this kit was purchased back in the late 80's, its compledte except for some of the paper work. I have the little booklet which has some drawings in it, but no dimensions, except on the back of the booklet in feet, and the scale division marks are in feet. I believe there were some templates originally in the box, but no longer. If need be I guess its out with the vernier and measure all parameter and try to first scale up, then drop down to 1:76. OK IF the printed booklet wasn't reduced in the process of printing....unknown The dimensions that would help me are the length & width of the building, and the height to the apex. BTW the price tag on the box was £8.95 or if there were templates with dimensions on a copy would be useful. many thanks Richard Link to post Share on other sites More sharing options...
gordon s Posted September 7, 2013 Share Posted September 7, 2013 Hi Richard. I have the kit here with the instructions, but they appear to be generic and are titled 'Craftmanship in Plastic, Getting the best from Wills Craftsman's kits'. There are no templates in the kit I have, so I guess not a lot of help. Link to post Share on other sites More sharing options...
richard-g8jvm Posted September 7, 2013 Author Share Posted September 7, 2013 Thanks. I have to booklet that refers to the one you have with no dimensions, except they give the size of the internal floor, so I could get the length and width from that. The awkward one is the height to the roof apex, as the building end is made up of three sheet sections. I'll go through it a few more times, and see what I can find. cheers Richard Link to post Share on other sites More sharing options...
moore43grm Posted September 7, 2013 Share Posted September 7, 2013 hi there, there should be a A3 sheet of templates, I have scanned them into 3 A4 size sheets, I hope these help. Link to post Share on other sites More sharing options...
richard-g8jvm Posted September 7, 2013 Author Share Posted September 7, 2013 Fantastic Thats saved a lot of work trying to get the dimensions. Many thanks Richard Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.