charliepetty Posted May 21, 2014 Share Posted May 21, 2014 Anyone had issues with the lights not working using 'ANY' 21Pin decoder apart from the expensive Murphy Models ones, seems as though we have non standard mapping on these and the 201 locos. Link to post Share on other sites More sharing options...
murphyfp Posted May 22, 2014 Share Posted May 22, 2014 Hi Charlie Are your sure that it is a 21 Pin on the loco and not the 22 Pin as some decoders would fit but not work due to the different signals. Richard Link to post Share on other sites More sharing options...
pauliebanger Posted May 22, 2014 Share Posted May 22, 2014 Hi Charlie, Not sure what is meant by a 22 pin connector in this regard, but Murphy's Models customised ESU instructions show the 201 as a 21MTC interface. Download the instructions here: http://www.murphymodels.com/Technical.html Paul Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted May 22, 2014 RMweb Gold Share Posted May 22, 2014 Anyone had issues with the lights not working using 'ANY' 21Pin decoder apart from the expensive Murphy Models ones, seems as though we have non standard mapping on these and the 201 locos. I'm pretty sure they're non standard in their mapping. I used the latest Bachmann ones in mine, means I havent got cab lights but since they're so awful I can live without them! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.