KingEdwardII

Like High Speed Railways? ;-) Yours, Mike.

Yes, but that did not make any impact on passenger numbers, as the graph shown by @AndrueC shows. The upturn in numbers occurred much later and only after privatisation. Yours, Mike.

Unfortunately, the increases apply equally inevitably to rail fares... Yours, Mike.

Makes me feel a lot happier that I use point motors with a built in switch to handle the frog polarity... Yours, Mike.

The next question to ask is "what kind of branch line?" A small branch line just serving local travel needs would be unlikely to have much in the way of MK1 coaches. Larger branch lines with longer distance trains would have had MK1s. Here I am thinking of branches such as those to Aberystwyth and to Minehead. Both of those would have longer services ("Cambrian Coast Express" etc) and there are photos of MK1 formations for those services in the 1950s. However, these are not typical "branch line" trains and are quite long (7 coaches or more). Shorter branch lines often had non-corridor stock of uncertain origins ;-), with trains 2 or 3 coaches long. Yours, Mike.

Aberystwyth station looked pretty sad a few years ago. It was always a rather grand building and the ironwork on the platform canopies was classic Victorian decoration, but it had been neglected for years. Now, it has been spruced up and a new use found for the abandoned platforms 4 & 5 with a very sympathetic adaptation. The rerouting of the Devils Bridge line to terminate in the old platforms 1 & 2 area also means that many more people get to see the station. Yours, Mike.

I don't remember many of those while travelling to/from Cambridge in those years. From KGX, it was pretty well always an EMU to Royston and then a change to a DMU for the rest of the journey. A big contrast with the loco hauled services from Cambridge to Liverpool Street. Yours, Mike.

Bribery CAN win you friends...

I would imagine so, since the weekday traffic would hardly justify longer trains of this sort. I mostly find DMUs in the later photos of places on the line to Barnstaple (post 1970), just as today. Quite a contrast with Newquay where there are loads of photos with Warships, Westerns, Peaks, Class 47s and so on. However, the strange thing is that modern records of passenger numbers for these stations tell a different story. Newquay recorded about 130K passenger entries/exits in 22/23, while Barnstaple recorded almost 537K in the same year. Barnstaple has a steady 1 train per hour schedule to/from Exeter, while Newquay has a much sparser service (~every 2 hours) with most services terminating ar Par and needing a change to get to Plymouth. So these days, it seems that Barnstaple is much more heavily used... Yours, Mike.

That line retained loco hauled services on summer Saturdays while the line to Ilfracombe survived, but once that closed in 1970, DMUs ruled the roost. I think Newquay is a place where loco hauled trains survived much longer. Newquay has always had a proportion of longer distance trains, including HSTs and IETs in more recent times. There has also been significant freight on that branch. There are a lot of photos on the Cornwall Railway Society site. Yours, Mike.

Extraordinary to see my stomping ground of the 1970s being dragged into the 21st century. I shall have to go on a celebratory trip once the electric trains are in service, although I no longer have family living in the Cardiff area - but I do have some still in Aberdare. Many thanks for the photos. Yours, Mike.

Hmm. The length of a branch line train could vary a lot even on one branch - 1, 2, 3, 4 coaches are all visible in photos of the 1950s and 1960s (& I'm going to ignore summer Saturdays trains on branches with holiday traffic!!). Even well into the '60s a classic configuration on ex-GWR lines was the 2 coach B set - not usually MK1s - although I can see examples of 2 coach trains with at least 1 MK1 included. I suspect that the average branch line was not top of the list to receive the latest coaching stock... As time went by, loco hauled passenger trains on branches gradually dwindled with replacement by DMUs, for those that didn't get closed. So, it really depends on the kind of branch you're modelling and the era. Yours, Mike.

I installed and wired my 30+ point motors from underneath my boards without much hassle. The main thing is to provide yourself with a good means of support so that you are relatively close to the underside of the boards rather than stretching from the floor. Cushions from an old sofa are one idea... I agree about the need to do all the pre-drilling of holes for the point motors before the turnouts are installed. Yours, Mike.

I can imagine a small oil depot, but in my experience, refineries are inevitably rather large. Yours, Mike

Well done for being prepared to stand there in those conditions - reminds me of my mile long trudge to school in the rain back in the '70s! Definitely. It's a huge step forward. Fantastic to see. Yours, Mike.