Ian Smith

I've used the 6x15mm motor in both my Steam Railmotor and 517 (0-4-2 tank). The SRM has a 2-stage reduction (14:20) then driving through a 21:1 worm/gear, with 7.5mm drivers (the 14 tooth pinion is on the motor shaft). It is perhaps a little slow (but eminently suited for something that probably wouldn't exceed 35mph) but the ensemble is capable of pushing my rake of 6 wheeled (N/S) coaches (can't pull them cos the SRM doesn't have couplings). The 517 drives directly through a 30:1 worm/gear to 10mm drivers, and is a little nippy. It may be more "controllable" on DCC - I don't know as being a dinosaur I'm an old-fashioned DC kind of guy - however I find it is perfectly suitable for my uses on Modbury. Ian

Not seen any information about Abingdon & District MRC's exhibition on RMweb, so thought I'd post something. The exhibition is due to take place on Saturday 4th March 2023 at the Abingdon and Witney College, Wooton Road, Abingdon, OX14 1GG. There should be some 25 layouts there and assorted traders too. (https://admrc.org.uk/exhibitions/abrail-2023) I will be there with my 2mm Finescale layout "Modbury", along with another 2FS layout "Lighterman's Yard". Modbury (photo taken by me) Lighterman's Yard (photo randomly selected from t'internet photographer unknown) Ian

I don’t think that that wagon is a W2 cattle wagon. I think it is one of the undiagrammed “Large” outside framed cattle wagons. The framing on the ends is different (diagonals come all the way down to the bottom outside corner of the ends) and also the size wording on the end looks more like “LARGE” than “MEDIUM” to me. Ian

Lovely looking wagon! I’m so glad that others have found my wagon sheet artwork useful. For my 2mm scale wagons I inkjet print onto Rizzla cigarette paper, so it’s always interesting to see what others do in the larger scales. I particularly like the use of EZline for the ropes. Just out of interest what thickness is the line? Ian

Stu, I’ve been going to reply to you for a couple of weeks (either on here or the VAG), so apologies for my tardiness! There are copies of original drawings for the class in GWRJ nos 2 & 16. No 2 shows the class pretty much as built albeit with a larger bunker. My current project is also building a 45xx but in as built condition suitable for my circa 1906 Modbury layout. I am using a suitably modified Dapol body with a scratch built chassis. My chassis is built “traditionally” with phosphor bronze frames and pcb spacers. I decided not to mill one this time as there is plenty of space in the body for weight. I am/will detailing how I did it in my Modbury thread, but my chassis builds can be somewhat organic as I tend to adapt my ideas as I progress - a case in point on this one is the need to file away almost 0.5mm from the top of the chassis to allow body to sit lower, also I now realise that my original intention of fixing motion brackets in slots in chassis is a non starter as the leading wheels preclude this. Therefore I am now considering cantilevering them from the cylinders, speaking of which I am currently hacking from solid lumps of brass! Ian

Modelling over the last few months has taken very much of a back seat, indeed very little has been done at all!! However, when I have returned to the workbench I have been progressing the 45xx that I started. The basis being a Dapol later 4575 sloping tank top version which will be completely inappropriate for Modbury's circa 1906 period but could be pressed into service on St. Ruth. It transpired that Chris Carlson (MinerChris of this parish) had a couple of flat top tanked 45xx bodies in his collection, one of which he was prepared to donate to the cause. This came as a collection of bits and pieces that he had purchased from DCC Supplies when these things were available as spares from them. In reality all I needed was the main body element comprising the footplate, tanks and bunker. I intended to separate the 4575 body I had to salvage the boiler assembly and the cab, and then fabricate any other bits as necessary. With a suitable donor body at my disposal, I set about looking at it to decide what I wanted to do with it - the view now being to build a model of the prototype 45xx (No. 2161). The body was compared to the drawings and photos I had in my collection to try to establish what I would need to do to back date it to original condition. The list was quite extensive : Remove all of the handrails (to be replaced with wire examples) Remove smokebox door handles (to be replaced) Remove the lamp irons (to be replaced with finer examples) Convert the lower footplate to a straight drop (rather than curve drop) example Remove the cab side sliding shutters Remove the safety valve casing and top feeds (to be replaced with a turned brass example) Remove and replace the whistles Replace the tank top furniture with better home-made examples (the tank fillers are of the later tall design anyway) Replace the buffers with a "Dean" tapered type rather than the parallel version Dapol have provided Shorten the smokebox (in the end I've decided not to do this as I think I stand more chance of making a complete hash of it than a good job) - it only needs about 0.5mm removing anyway Shorten and lower the bunker Lower the cab roof Convert cab roof from steel type to canvas covered wood Remove rear cab window grills and open out the windows Lower the cab doors - they should be 3'0" tall but the modelled ones are about 3'6" so about 1mm too tall So, quite a list (which will probably develop as the project progresses)! Firstly, the handrails were all carefully carved and scraped away, and while at it the cab side sliding shutters were carefully scraped off trying to preserve the raised cab beading around the openings. While working in the cab area, a fine square file was introduced into the cab openings to file down the cab doors to be 6mm tall too. The boiler assembly was removed from the original 4575 body (Chris didn't have this in his collection of bits and pieces), this involved drilling away the footplate mounting peg from below the footplate under the smokebox. Once separated, the smokebox door handles and the handrails were removed, and the safety valve/top feed assembly prised out of the huge recess in the top of the boiler. The clip on cab assembly was addressed next, the roof surface detail was simply filed away to leave a smooth surface. Then the grills over the rear cab windows were carefully pared away, and finally the cab windows were drilled out and filed to shape and size. In an effort to lower the cab roof slightly, the tops of the cab sides above the side cut outs were carefully filed down as much as I dared (probably lowering the cab roof by at least 0.5mm). Boiler assembly after handrails, door handles and safety valves and top feeds removed. Cab assembly showing the attention given to the rear to remove the widow grills and open out the windows. Then came the fun!!! Sorting out the bunker. As originally built, the 45xx had a much smaller bunker, being the same height as the tanks and also being 9" shorter. Therefore I had to give consideration as to try to modify the Dapol model or simply fabricate a whole new bunker area from scratch. In the end, I elected to try to modify the Dapol bunker and if I failed then employ the build one from scratch approach! Firstly, lower the bunker. This was a simple piercing saw exercise of cutting away the raised bunker extension, then making good with fine files. As can be seen, the buffer housings have been pared off ready to be replaced with some of my own turnings which will represent the tapered version that the first of the class originally sported. Secondly, shorten the bunker by 1.5mm. Again the piercing saw was employed to carefully cut away the rear of the bunker (whilst also preserving the chassis mount below the bunker). Then fine files were used to get rid of the excess length in the bunker whilst also maintaining a good set of mating surfaces so that when reassembled the bunker rear would be vertical and need a minimal amount of filling. You can see that I had forgotten to complete the removal of the top of the near side cab door at this point - luckily I remembered later!! I took the opportunity to remove the steps and lamp irons from the bunker rear too. Thirdly, reinstate the bunker rear. As the Dapol body is plastic, I elected to try DLimonene as a solvent to re-join the parts. As this solvent is relatively mild compared to some others, it was necessary to hold the parts together while the joint made good. Placing the boiler assembly in place gave the elastic band somewhere to anchor itself to whilst preventing it from pulling the tank sides inwards. The twist of fine copper wire ensured that the cab sides and hence the bunker sides were held vertical and in alignment with the bunker rear (they had a slight tendency to splay outwards!). The curved valance was subsequently made good by gluing in a small noggin of 0.020" black plasticard which was filed to shape once secure. Finally, the beading around the top of the bunker needed to be re-instated. However, before I did this I tried to re-shape the flare at the top of the rear bunker sheet a little - The bend should be a bit sharper than what I had been left with after removal of the top bunker extension. It's not prefect but will have to do! Anyway, back to the beading. An oversized piece of 0.005" plasticard was welded in place around the top of the bunker sheets. I've also filled all of the various holes in the footplate, tank top and boiler assembly with milliput. The beading was then carefully pared back to be a little proud of the outside faces of the bunker by using a piece of 0.006" nickel silver sheet as a fence against which a sharp razor blade was run to remove the excess. The inside was then trimmed flush with the Dapol sides. Obviously it's over scale but is in keeping with the tank beading of the original model. I will run a file around the inside edges of the bunker to try to thin them a little before I glue the cab in place though. That's about all for now, hopefully I will start to feel like cracking on with both this and my Duke projects in the new year! Thanks for looking, Ian

Richard, So glad that you’ve started a thread on Lambourn. I look forward to seeing future posts! Ian PS thank you for the kind remark regarding Modbury’s stock

No modelling to report (as I have completely lost my mojo since the end of summer). However, yesterday saw myself and Modbury out and about at the North Mercia Area Group (NMAG) - some weeks ago Laurie had invited me to come along to show Modbury off and provide a presentation to the members there of what, how and why my modelling had taken the course it had. From my perspective I think the day went very well, Modbury certainly seemed to generate a lot of interest. I hope that the audience went away inspired and eager to progress their own projects. I’d like to use this forum to publicly thank Laurie for inviting me and my train set along for the day, and hope that all those present took something away from the day (apart from full bellies from the wonderful buffet😆) Ian

Very kind of you to say so but I would like to say that Modbury is my first 2FS layout and when I started it I had not done any track building (or any other railway modelling) for well over 20 years. For info, my baseboards are located together with brass dowels and sockets and bolted up solid with 6mm bolts. Experience has shown that this approach gives perfect track alignment every time because the boards “lock” together perfectly every time. It therefore matters not how many rails cross the baseboard joints so long as they are secure (by being soldered to brass screws) very close to the baseboard edge, and of course those rails were laid level and in line originally. As Jim said, patience, care and attention to detail is all that is required - remember that your permanent way should be exactly that - permanent - most things that come after can be replaced if you feel your skills have developed sufficiently to render early efforts replaceable. Ian

Similar to Jim but not quite the same, I have a whole turnout straddling a baseboard joint - switch on one board and crossing on t’other. Never given any problems, again like Jim my rails are soldered to brass screws at the baseboard edges. Modbury has been out to 8 or 9 exhibitions since this was layed (and separated and re-erected many times at home , including 2 house moves). I really don’t know what all the fuss is about 🤣 Like so many things, care and attention are paid in the first place pays dividends. Ian PS I always was a bit of a maverick 😂

John, My first 3 engines (1854 class, Metro and Buffalo) all have number plates from my own artwork and etched by PPD in 0.005” brass. The 517 and Dean Goods both sport number plates etched for me by “Narrow Planet”. Very satisfied with the NP ones, but as they are bespoke the delivery time can be a couple of months (not that I found that an issue!) Hope that helps Ian

For anyone interested, I have just uploaded the two GWR Wagon Sheet JPGs that I drew several years ago that have been lost in the RMweb problems. They were originally in my personal gallery but I can't even find that in the new system, so I have therefore uploaded the two files to the "Community - Modelling" gallery : I hope that these prove useful to fellow modellers of the Edwardian era. Ian

I’ll say the body has been damaged. Looks like all of the boiler furniture has been knocked off and it may be sitting a little high 🤣

Modbury is now all packed up and ready for loading into the car tomorrow. This weekend's outing is to the Farnham & District Model Railway Exhibition in Aldershot : https://farnhammrc.org.uk/?page_id=158 Looking forward to the weekend. I've just about managed to get the 45xx ready for the weekend - it runs. I haven't got any photos of it at the moment, as I've been too busy getting it into a running state to actually take any snaps. Suffice to say that all did not go to plan - the major fly in the ointment was that two of the white metal centred driving wheels decided to part company with their respective stub axles (all my own doing, in that I had glued them into the wrong muff (with a worm gear wheel on rather than a spur gear), and trying to break the bond managed to effectively destroy the wheel set!!) A quick order to shop 3 furnished me with a bright shiny new set of Mk5 wheels but they didn't arrive until Tuesday. Getting the chassis running as an 0-6-0 was a doddle, but the two pony trucks have proved a little troublesome. In the end I've employed small amounts of lead where ever I could put it and some springy wire to get them to stay on the track. The wire springs-cum-pickup wires were tricky little blighters to adjust as too strong and the drivers were lifted slightly off the rails so it barely moved, and of course too soft and the pony trucks would derail on almost anything but plain track. Hopefully for the weekend it will provide an extra item of motive power, but I may well borrow John Russell's 2251 again just in case 😂 Thanks for looking, and if you're anywhere near Aldershot this weekend pop along to the show. I haven't looked to see what else is on offer layout-wise, but I do know that Dave Stone will be there with Sherton Abbas (another GWR Edwardian layout but in 7mm scale) - but do bring your platform shoes as Dave displays his layout at about (my) eye level, although for him it's probably about waist level 🤣 Ian

Exquisite!! You know you really need a Steam Railmotor now 😂 I’ll get my coat … Ian

Dave, Many congratulations on your retirement!! Looking forward to seeing you and Sherton Abbas at Aldershot - We’re there with Modbury too 😀 Ian

A couple of weeks ago I went along to TINGS (The International N Gauge Show) to help my friend Benn with his "Barton Road" layout. While there I had a look at what was on offer on the Dapol stand - not something I would normally do as RTR N Gauge holds little to no interest for me - however, on sale was a "Wobbly & Stuttering" 45xx for £25. I parted with the necessary cash and with Modbury's next outing just a few weeks away (now just a couple of weeks), I thought I could do a "quicky" to add to the Modbury loco roster. This post relates the progress so far. I have to say that I was a bit disappointed when I opened the box as it purports to be 4518 (an early member of the class with straight tanks), but what I actually got was a 4575 class (a 45xx with larger sloping tanks). I've always had a bit of a soft spot for these small prairie locos, and a 45xx was one of my failed attempts at 2mm Finescale loco building from the 1980's. A result of that failure is that I still have a full set of wheels in readiness for this project, albeit the old white metal wheels with steel tyres. The Dapol loco as purchased (or nearly so, as I have stripped and rebuilt the N Gauge chassis so that it will actually move - although not well). Obviously, I didn't actually give a hoot about the N Gauge chassis as I will be replacing it anyway! The first thing (after fixing the N Gauge chassis) was to measure the loco and compare it to drawings of the 45xx class in Great Western Journal's Now 2 & 16. It was then a simple matter of drawing up in CAD a set of frames that will fit under the N Gauge body. I had decided to scratch build a chassis rather than purchase the chassis David Eveleigh has produced, I don't quite know whether David's chassis is "wrong", but I have seen at least three 2mm Finescale 45xx's all suffering from the same affliction - the cylinders don't line up correctly with the outside steam pipes (the pipes should line up with the centre of the cylinders whereas the models I've seen have the pipes offset toward the front of the cylinders!) I will be using a Nigel Lawton 8mm motor in this engine, driving a 30:1 worm/gear, then using 18/22 tooth spur gears onto the leading driving axle. This arrangement was also included in the CAD, and once happy with the arrangement the drawing was printed out (at scale). The drawing was superglued to a couple of laminations of 0.25mm phosphor bronze strips, and the piercing saw and files brought to bear. Before cutting the frames out however, I had to cobble up some coupling rods by cutting and splicing from Association etched coupling rods. To aid in this, I set up my lathe with the vertical slide so I could attach a sheet of tufnol to it to drill a set of three 0.5mm holes at crankpin centres. Putting chemically blackened pins in these holes allowed the coupling rods to be assembled without getting soldered to the pins. The basic frames fretted out of a laminated pair of phosphor bronze strips. The axle holes were pilot holed 0.5mm using the previously made coupling rods, then opened out to 1.5mm for the axles. The slot in the top of the frames just forward of the leading driving wheel axle hole is where the motionn bracket will eventually attach. A couple of lengths of 6.4mm wide double sided PCB were cut for the chassis spacers (1.6mm thick), and an extra 0.5mm thick piece of double sided PCB was cut to go above the front pony truck. A couple of photos of the resultant chassis - although before it was assembled, I drilled further holes for the brake hanger pivots and also for "Simpson" springs. I've also drilled a couple of holes where the outside cylinders will eventually go - I intend to file the cylinders from solid brass blocks, which will be pegged and glued to the frames, the holes are for the pegs. And finally for now, the chassis sitting below the Dapol body : Earlier today, I trial fitted the wheels and was absolutely astonished that when once quartered all I had to do was open out the crankpin holes to 0.55mm to have smoothly rolling chassis. It seems a shame that I've got to strip it down in order to paint it!! Thanks for looking Ian

Pure luck 🤣 Seriously though, I just took it carefully using mainly parallel jawed pliers and thumbs. Part way through the process I did wonder if I should have annealed the brass first though.

Jim, I’ve corrected the spelling mistake 😃

Further progress on the Duke ... Before the cab could be secured in place on the footplate, the cab beading had to be installed around the cab side openings. As is my wont, I did this in the same way as all of the other locos I've built by cutting a narrow strip of 0.004" nickel silver and soldering it around the inside of the cut outs. Once secure a gentle filing operation ensues to reduce the thickness of the strip so that it is just proud of the outside faces of the cab sides and pretty much flush with the inside faces. Little tongues of the strip are left protruding from the lower edge of the cab cutout to later attach the vertical handrails to. Before fixing the cab in place a couple of holes were drilled in the footplate just behind the cab sides to accommodate aforesaid handrails. The cab was then soldered in place over the rear splashers : I then decided that it was about time that I progressed the chassis! Therefore a block of brass was cut which would provide a bearing for the worm shaft, a horizontal 1.5mm hole was drilled for the shaft, and a 1mm hole drilled perpendicular to it to provide an oiling hole. I could have milled the resulting block to shape but elected to do it the old fashioned way with initially a large coarse file, then a finer file to clean it up. The bottom of the block was filed at an angle so that the worm shaft would be inclined as the centre line of the motor in the tender will be lower than a horizontal worm shaft. The idea being that I will incline the cardon shaft slightly, thereby accommodating the height differential through two smaller angles. If it doesn't work out, I'll simply make a new worm bearing block with a horizontal hole. The worm shaft itself is a length of 1.5mm silver steel, one end having a pair of flats filed on it through which a 0.5mm hole was drilled to accept the looped end of the cardan shaft. To prevent the shaft disappearing inside the bearing block (as far as the loop will allow), a small brass washer was soldered to the shaft - to make sure said washer doesn't come adrift at any time in the future, a further 0.5mm hole was drilled across the shaft and a piece of nickel silver wire was inserted, the washer actually being soldered to this wire rather than the steel shaft. The finished product can be seen below with a temporary cardan shaft which allowed me to connect the ensemble to a mini drill to make sure it all worked. The bearing block is secured to the frame spacer between the driving wheels with a pair of 14BA bolts : The boiler is next on the agenda, so a piece of suitable sized tube was cut for the boiler/firebox, and a further piece of the same tube was cut for the smokebox. The smokebox piece was cut along its length to allow it to be opened out to fit over the end of the boiler. The boiler/firebox length was cut with a fine piercing saw (an 8/0 blade) across, then a lengthways cut was made to meet the cross cut. These cuts allowed the round topped firebox sides to be bent down. This took a little time to ensure that the firebox was formed with its correct waisted form. Once I was happy with the shape, the boiler/firebox were offered up to the cab front/footplate/splashers, and marked so that I could remove a little material around the wheels, but more importantly to gauge the height of the boiler. Where necessary, a small amount of material was carefully filed and sanded from the lower edges of the firebox to allow the boiler to sit at the right height. The photos below show the various steps : The two pieces of tube with the various saw cuts made - down the length of the firebox tube to allow it to fit over the boiler tube, and across and along to allow the firebox sides to be formed. Bending and filing operations complete on the firebox. Finally, a couple of photos that show the boiler assembly temporarily plonked in place (with a small piece of PCB to support the smokebox end) : Thanks for looking Ian

Edwardian, Just checked, Darlington is about 160 miles from me (so similar to Portsmouth). I would have to discuss with my usual operators to see if they would be interested. If you can PM me some details (exhibition organiser, dates, etc), I’ll get in touch. Ian

Edwardian, et al, Modbury’s next outing is to the Farnham and district exhibition in Aldershot on 8/9th October. Next year the only exhibition I currently have booked is RailEx in Aylesbury (although I have just been invited to Portsmouth sometime in November) Ian

A little more progress on the Duke ... (shown in a sequence of photos) : Firstly, the "splasher disks" that I previously turned were cut in half, then carefully filed such that their lower edges followed the profile of the curved footplate over the wheels. As I had (purposely) turned them over wide, once soldered in place the correct width was scribed using a locked off Vernier Calliper before they were carefully filed back to the scribed line. The steps were then added to the uprights - these were cut and folded up from strip of 0.004" nickel silver. Thoughts then turned to the cab. The basic outline of the two cab sides and the cab front were marked out onto a sheet of 0.010" nickel silver, the corners where the sides and front meet were initially scribed as part of the marking out process before being gouged out as a bend line with a skrawker. The centres of the cab windows were carefully marked and a depression to start the drill made with my usual tool for this, a sharpened gramophone needle ground with 3 facets (and therefore 3 cutting edges). The cab spectacle centres were then drilled 0.8mm and the part cut and filed to shape. The cab sides and front cut to overall size and shape before the side cutouts were filed to shape. The rough shape of the cut outs was marked on the part with a needle so that the majority of the waste could be removed with a piercing saw to save filing time. While the side cut outs were being filed to shape, the part was constantly compared to a photograph to ensure that I was getting curves that looked reasonable. Prior to folding up the cab, the previously scrawked bend lines were made a little deeper with a square escapement file, trying not to break through to the other side of the metal! Even so, when the bends were actually made, the fracture lines caused nearly separated the cab into its 3 parts! A quick application of 188 degree solder gave the corners sufficient strength to allow the fairly rough handling that was about to descend. LET THE FILING BEGIN!! It was then a simple (although time consuming) task to employ a half-round file to the areas of the cab sides until the cab could sit comfortably over the rear splashers. And the other side showing where the solder had leached through the fractures at the bend line. As can be seen the cab spectacles have been opened out from their initial 0.8mm to about 2mm by using ever increasing sizes of tapered broaches. Even so, they are still undersize so will need final opening out with a rat tail file. And finally, a shot to show that all of that filing was worth it as the cab now sits snuggly over the tops of the rear splashers (although not fixed yet). The next phase will see the cab beading fitted around the cab cutouts, and of course the cab front needs a hole putting through it to allow a cardan shaft to go through it. Thanks for looking Ian

Last weekend Modbury made it's first physical appearance at an exhibition this year at RailWells. I think it's fair to say that myself and fellow operators John and Steve enjoyed our weekend but is was flipping hot!! Modbury performed reasonably well despite the heat, over the course of the weekend 2 of the signals failed, both with the same fault - the guitar wire actuators became unsoldered from their respective levers (I use servos for the signals which have a drive rod from the rotating servo horn to a simple pivoted lever to convert the rotary motion into a linear one. The lever having a piece of springy guitar string to compensate for any excess throw). The 6 wheeled brake van decided to regularly throw itself off the track on one of the points by about lunchtime each day (it seemed fine in the cooler morning!!). Once home I was able to test thoroughly (and closely) and as assumed there was just a little binding as the van went through the offending point. Therefore I applied the soldering iron to the affected area to provide a little gauge widening through the area. The rake of 6 wheeled coaches were also temperamental on occasion coming off the Plymouth end train table. They were prone to derail every now and then or uncouple themselves. I think that in setting up the layout we (I) had introduced a bit of a hump across the two boards. The learning here is to make sure I include a 6" rule in my box so that I can check that the track work across the board joints is level. The final problems were at the board joint of the other fiddle yard board. There was a step of about 6-8 thou across one rail which caused the odd derailment. We decided to live with the problem over the weekend as once we knew what the problem was we were able to shepherd the stock across the joint. The resolution once home was to lift the offending rail and solder a slip of nickel silver shim beneath the offending rail. The other issue at this board joint related to the mouse hole and the Steam Railmotor - when coming off the outermost (tightest curved) train table road the rail motor just rubbed the side of the mouse hole. The weekend fix was not to use the outermost the railmotor on tighter outer roads of the train table, the permanent fix was to carve a little off the side of the mouse hole once home. Now some photos from the weekend : Some of the additions to the layout prior to the exhibition - firstly I have added a little more colour to the layout with the introduction of some white and yellow flowers at the font of the layout. The rose bay willow herb, nettles and thistles have been there for a while. To achieve this, some small pieces of Woodland Scenics Polyfibre were pinched off the main wad to give me little pieces about 3-4mm in size, the tops of which were brushed over with matt varnish and some Woodland Scenics "flowers" were sprinkled onto the wet varnish. Once dry the resultant flowery clumps were set onto a little more matt varnish within the existing scenery. Hopefully, this gives the impression of the flowers floating above the surrounding grasses and weeds in a natural way. I have to thank Steve Martin for this method of adding colour to a 2mm scale landscape. The second addition to the layout are the two point levers for the points not controlled by the signal box. The construction of these was detailed a couple of entries back in this thread. The point lever controlling the turnout for the cattle dock/goods shed sidings. Finally, some images of the latest motive power addition to the Modbury roster - the Steam Railmotor. This attracted a lot of interest over the weekend, probably helped by Jerry Clifford (who was immediately across the room from us) encouraging visitors to "have a look at the steam railcar" 😂 Anyway here she is : Thanks for looking! Ian

I’d forgotten all about the online competition. Just had a look on the Association website under Events only to find that “further details, including the 2022 model competition to follow”. I guess I’d better dig out the last newsletter to see what the categories, etc are!! Ian