Annie

Some years ago I fitted a set of 2 rail Hornby Dublo wheels on to a Triang TT Jinty chassis and it took me no time at all to do. It was a very easy conversion. I fitted a Triang 'Nellie' bodyshell that had been carefully painted in LMS lined black livery onto the chassis and a right corker little engine it looked too.

Fits with it being possibly red I suppose. 🤨 It's just with it being so high up on the side of the van and neatly written twice it didn't strike me as being a shunter's chalk mark.

Good information to have for those of us that follow the left hand path. Any clues as to what the script-like writing says on the second plank down from the top side edge on No.35015?

Thank you very much Tom. The 1887 OS map shows a plain field and the next map which was revised in 1902 and published in 1904 shows the field converted to a dedicated auction site, - so from your information I guess that means somewhere in the 1890s the field started being used for cattle auctions. My standard gauge version of the Minehead branch is intended to represent the 1890s so I think that should work out very nicely. I had a thought about the long siding behind the cattle dock that seems to have a loading platform on the seaward side and I wonder if that was installed once cattle auctions became a regular event in that field beside the station yard. I think I will go with that and add in that siding. Since I split off a clone of the layout so i can create the earlier Broad Gauge era during the 1880s should I want to there's nothing stopping me from making these later additions.

This is what the 1904 OS Map shows of Minehead station. Not a lot has changed really except that there is a new long siding that runs up behind the cattle dock. The 1880s goods yard as shown on the OS map that I've modelled at Minehead doesn't have that much siding space so I can see why the extra siding was added. However what I hadn't noticed before is that a cattle auction yard is now sited in what was shown as an empty field on the 1880s map. I haven't been able to find out a thing about it, - though discovering that Minehead was a major centre for training mules for the army during WW1 was certainly interesting, apparently they were brought in by the sizeable trainload about every six weeks and then taken away again once they got their army mule practicing certificates. I suppose the cattle auction site in the field would look much the same as any other in the district should I decide to model it. I doubt very much that it suddenly appeared in 1904 just in time to be surveyed.

My copy of the 'O' Gauge Guild Gazette has just arrived to remind me what an 'O' Gauge failure I am and have been over the past months. I must say though that it certainly is a darn fine read with plenty that's of interest. There was an additional bonus a week or two ago when the GER Society Journal arrived and it was almost entirely taken up with lengthy, detailed and informative articles about Great Eastern Tram Engines. That made a very nice change as for a while there the Journal had been drifting further and further away from anything about the Great Eastern Railway and even had some articles about diesels (shudder). With the price of membership fees ever rising for those of us who live in the far flung colonies it's become a major economic decision to stick with a Uk railway line society for another year so I hope the GER Society continues to keep it's socks pulled up.

Morning Broad Gauge Cheer Up Picture: Millbay Railway Station 1880s. From the collection of Malcolm McCarthy.

The Longridge is back from the 'works' as well, - though it only need a fairly minor adjustment before it was declared fit for duty again. Most of my mid-19th century engines that did duty on the Eastlingwold & Great Mulling use Hawthorne Hicks tenders because I think they are the nicest of the mid-19th century tenders I have in my collection.

I was able to get the three SER Cramptons sorted out today so that they no longer attract council bin men wearing hi-viz. Now that they have a proper footplate crew I should be able enjoy running trains with them again. As I mentioned I have three of these Cramptons ranging from slightly weathered through to heavily weathered, - this is the grubby one.

With working in digital environments as I do with railway simulators it is possible to have some parts of the timetable running under AI control. My main interest is parcels traffic, trip working and shunting so I'm quite happy to have the passenger service largely running by itself while I shunt wagons and vans about and keep an eye out for signals for my own slots in the timetable. That said though I don't know if I would want to be operating a layout much bigger than my own modified version of Minories.

Coating extremist Tories in layers of zinc plating sounds like a good idea to me. It's not a joke at all really since we have have our own brand of newly arisen extreme conservative politicians here who are preaching barely disguised eugenics based policies against anyone who dares to be the wrong colour and poor.

The Longridge has gone off to the works for some minor adjustments so here in the meantime is a snap of a WIP attempt at restoring the Broad Gauge trackwork again on cloned version of my Minehead layout. No mixed gauge track this time and no procedural trackwork either. Procedural track is all very nice with the way it automatically generates point frogs and check rails, but in the case of Broad Gauge track using this system the cross-ties tend not to be evenly spaced and sometimes even closed up close together and it ruins the appearance of the trackwork. So what I've done is go back to the original plain and ordinary Broad Gauge track I was using in Trainz TS2009 and TS2012. It might not have moveable point blades and frogs and check rails, but at least it does what it says on the tin and doesn't cause any problems. I've only done the basic trackwork change over so far with the necessary adjustments around platforms and in goods sheds & etc still to do, but that won't be any real problem to sort out.

May I ask where that plan is taken from?

Another of my mid-19th century engines has had the digital dust blown off it. This is a Longridge 0-6-0 of circa the mid 1840s. R.B. Longridge & Co were a Locomotive Works established in 1838 at Bedington. They quickly developed a reputation for quality work, but due to strong competition from other makes they found themselves unable to compete and the works closed in 1853. It's been estimated that they made 209 locomotives altogether including six Broad Gauge engines for Daniel Gooch. No.5 was a 2-4-0 standard gauge Longridge locomotive absorbed into the GWR from the Shrewsbury & Chester Railway during the mid-1840s. A good enough excuse for me to run my 0-6-0 about on GWR metals. It needs a little bit of tidying up here and there, but it always was a good runner when I had it hauling mineral trains on the Eastlingwold & Great Mulling. Brakes are a wee bit on the appalling side which is why I've set the tender up with functional brakes.

Tight curves as evidenced by those check rails. Thanks for posting the interesting picture link. I don't know if I'll do anything just yet, but it's certainly something to think about.

Definitely interesting. (1900s OS map)

Something tells me the final result was an LMS 4-6-0 of indeterminate origins. BUT I was only young back then and still learning what was one end of a locomotive from the other.

I remember that article, - and (cough) I even had a go at it myself. Some sawn off bits from a Kitmaster 'Coronation' Pacific were thrown into the mix as well.

I'm delighted to read that you originally created this model in Sketchup Linny as Sketchup 8 is the only 3D modelling software I have managed to master and know how to use.

I can remember when the plasticard revolution hit the shops and the railway mags. Many articles were published about how plasticard was the miracle material that was going to transform modelling. Not in any way wishing to denigrate Brother TurboSnail's modelling skills or methods, but I knew the day would come when my adherence to the John Ahern school of model building construction would be shown to be worthy. Wood and card models have their own ways of demonstrating their aging with the passing of time, but at least shattering isn't one of them.

Yes I must agree Mike, - without the work done by the late Eddy Brown it would be considerably more difficult to model the Broad Gauge era. I've just paid my BG Society sub for the year and while the exchange rate with the British pound took a good sized bite out of my budget I was only too glad to pay up so I could continue to access the society's invaluable resources. Even though I used to make finescale brass models when I was in better health I really do have to comment that things are so much easier to do in the digital world. No fuss, no mess, no burning my fingers or ending up with my clothing getting covered with brass filings and swarf. In a way I do miss that kind of fine handwork, but it's no use moaning about what's impossible for me to do anymore. Examining how something fits together is certainly easier to do in a 3D environment where parts can be readily adjusted for size and shape as opposed to spending hours cutting and filing metal. Looking at your 3D Fusion models I can't help wondering how easy it might be to turn them into models for Trainz. Steve Flanders made a collection of mid-19th century Broad Gauge models for Trainz almost a decade ago now and most of them seem to hold up well despite their age. You must have a considerable collection of Broad Gauge rolling stock parts by now. I always enjoy reading your blog posts about assembling your printed models, but then I'm not having to find somewhere to put them once they are done.

Having just sprayed my cup of tea across the room I'm finding it difficult to stop giggling. Like the Australian parish members I'm finding it difficult to understand why any number of a variety of rust resistant corrugated steel roofing products that are commonplace here in Australia and New Zealand aren't made use of in the UK. The corrugated steel roof on my 1930s miners cottage might be getting on a bit, but it still keeps the water out. It even managed to make a heroic job of it during the tropical cyclones we suffered during our 2023 Summer that wasn't.

Lovely 3D modelling work Mike and excellent research as always.

Nooooooooo GWR wagon colours were mentioned! Run! hide! Tin hats must be worn, - don't come out until you hear the all clear siren.

Thanks, - it's been really nice to bring out some of my older layouts from my archive hard drives. I messed things up with trying to make the Minehead branch dual track in TRS22 and once TRS22 started having stupid faults and issues and broken scripts with every 'update' I was stuck because I couldn't take the layout back to TS2019-TRS19 where things were still sensible and working as they should. At least with this version I still have the good work I did on Minehead, Dunster and Blue Anchor. Doing Stogumber again won't be so terrible, but with Crowcombe Heathfield I had done a lot of topographical work with the landscape as well as rebuilding the village and the station and that's just going to have to be flagged away. Perhaps a year from now TRS22 might have been properly sorted out, but I'm not going to hang around waiting. It would be wonderful to see the rescue layout restored to usefulness again, but on the other hand a roundy roundy test track has a lot of advantages when it comes to fettling locomotives and rolling stock. You've had a good many issues and responsibilities lately with moving your elderly parents out of their house to a better situation so being able to retreat sometimes to the peace of your own small created world is definitely beneficial, is good for the soul and has much to recommend it. These past 6 months my daughter has been unwell and if it wasn't for 'Tristyn in Winter' and being able to run trains about in the snow during quiet moments I don't think I would have done so well as I have.