grw184
-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Blog Comments posted by grw184
-
-
"As I've bored you all before with my 48DS builds..."
Personally, I would use the word enlightened, anyway, could you possibly bore us again in as much detail as you are able? - pics - diags - whatever - particularly on what techniques/former you use to roll the bonnet...
I have 2 of these to start before the Judith Edge kit turns up
Many Thanks - GRW184
-
Perfect - Thanks Halfwit - now to damage some brass!
-
"I need to make the wooden groynes for the beach and it is hard trying to work out what I can use..."
just some ideas I am using for the S&B terminus at Porlock Wier:
1. Cocktail sticks - cut to length and glued together vertically over a couple of lengths of 1 or 2mm stripwood runner - or a piece of 2 below split down the middle
2. I recycle the most amazing junk - cheap bamboo 'venetian type' blinds are often made from around 2mm dia. bamboo rod - I am using this as a free alternative to 1. - I've got many miles of groyne out of 1 broken blind bought from the bargain bin at a homecare center
3. Ply sleeper strip. again cut to length and glued vertically over 1 or 2mm stripwood runner - leave a slight gap between the uprights and simulate the 'chair bolt' holes with a pin! or for the masochist - use Grandt Line nuts & bolts
all dyed with light grey ink to let the wood show through
Just a thiught
DS1169 part 2 - Bonnet forming.
in halfwit's fantastic workbench!
A blog by halfwit in RMweb Blogs
Posted
Brilliant - many thanks for this - now to mangle some brass!
GRW184