Tom F

Fresh off the bench today. @Accurascale FranDeltic finished for my client. This is the second on I've weathered for them, and with this one they asked if I could remove the allocation panel (as it hadn't been added during their operating period). Superb locomotives to work on.

Merry Christmas everyone. I only dip in here occasionally these days, but always like to keep up with what Tony is up to. No matter what you do over these next few days, make sure it involves some modelling time.

Thank you again for all the kind comments. It is genuinely humbling to have such lovely things said about my work. My modelling has been a very big support to my mental health and in some ways I maybe use it too much as a support. Members of the Thomas fandom have had such a negative effect on me, that the only way I feel I can continue to share my work is through the private facebook group I and others have referenced. It allows me to keep a greater control on what I post, and I think there is something to be said about keeping everything in one place. @JustinDean, thanks so much for positive comments about the facebook group. I'm glad my ramblings are appreciated. Thanks again folks, but I think I will sign off here. You know where to find me 🙂

Thank you John for your kind words. A book is something I'm looking in to. The main issue, is the copyright of the characters/locations/names that now belong to toy company Mattel. I'd love to do something similar to 'Ffestiniog Odyssey', but would wish to describe the fictional history in a realistic manner, it is the reason I created the layout after all. I really appreciate the comment and the wish for me to continue posting in this thread. However I just feel it is something I can not do. The Thomas fandom has had such a detrimental effect on my mental health, that I'm no longer comfortable posting my modelling on open forum as it has attracted unwanted attention. My facebook group gives me a nice sense of control, and allows me to limit who can access my material. For those not on facebook, it's only a few clicks to get registered. The group allows me to go into more depth to, discussing the published and unpublished material by Wilbert Awdry which I've used in modelling.

Thanks for all the lovely comments, I’ve been genuinely touched. I am really pleased how the article has been presented, over a 6 page spread too! The good news is another magazine has been in touch who would like photograph and possibly film the layout which has grown since Scaca, and will continue to grow. ‘Dry rails and good running…..’

Thanks Paul I only post in my private Facebook group these days (happy to send you a link if you drop you a message, rather thank hijack the thread further)

Thank you for the mention Paul. I don’t post my modelling on RMweb anymore, but I thought some of you maybe interested to know my Skarloey layout (which has now grown considerably) is in this coming months Railway Modeller.

Dear Tony I thought you (and others) may like to see the finished results on the loco I brought down with Ben two weeks ago. The loco was bought built from a modelling friend. I stripped it down, fettled and repainted, lined and weathered. Now finished, and posed ready for photographs which I'll be submitting for the Railway Modeller article on the layout. Next step, extending to depict the mineral extension.

Thank you Tony for a lovely day once again! My two locos are based on Talyllyn Railway prototypes, Fletcher Jennings No. 1 'Talyllyn' and No. 2 'Dolgoch'. Awdry created twins of these engines (also built at Fletcher Jennings) for his Skarloey Railway, the engines being No. 1 'Skarloey' and No. 2 'Rheneas'. The line being based in the eastern district of Sodor. Rheneas started like as a Bachmann TV series Rheneas with a face, a caricature of the real engine. Face removed, and new chimney and cab as well as other pieces provided from the narrow planet detailing kit. Skarloey, is a meridian kit I bought from a fellow modeller already built. It has been stripped down and some tweaking made so it is not as back end heavy. Next step is to add some detailing bits, ready for painting and lining (similar style to Rheneas). Ben @BritishGypsum4 I'm sure will be happy to discuss his models he brought down when he get's chance.

MSR No. 7 'TIM', quietly simmers at the Quarry before the crew begin to start shunting the wagons, ready to head back to Marthwaite.

If only it was Nick! Jim working an EBV

Thank you! 15 though platicard, roughly cut and painted grey and weathered with washes and drybrushing. Hope that helps

'No. 2's driver eases the regulator as they begin the climb beyond Arlesdale...'

Thanks again everyone for the positive feedback, Had a nice surprise when I came home from work, the painted Modelu figures by @Dan Evason 'No. 2's driver eases the regulator as they begin the climb beyond Arlesdale...'

Finally got around to writing the article for Scaca Fell Forestry Crossing tonight, just a few edits required. Hope for it to be in Railway Modeller later in the year.

Some recent commissions I’ve just finished for my client’s GWR layout. Very much looking forward to working on an Accurascale Manor when they are released.

What a lovely surprise! Fresh off the paint brush! Dan Evason has just shared these images of the beautifully finished Modelu figures. Crew and Passengers for Ballamoddey! Thanks Dan, they are perfect!

Thanks Martyn, it's become a real labour of love!

Thank you so much Rob for that. I love the photography side, and being able to bring Awdry's creations to life. So glad others are enjoying it too. Speaking of which....I was going to post this tomorrow, but might as well do it now 😉 MSR No. 7 ‘TIM’ (livery unlined black) The early years of the 20th century were very much the ‘Golden Age’ of the Mid Sodor Railway. With traffic increasing at Arlesburgh, the board felt another locomotive was needed predominantly for working around the dockland area. In 1912, MSR No. 7 ‘TIM” arrived at Arlesburgh by ship from England. The engine was a second (or possibly third hand) Sharp Stewart Tram locomotive, which had a strong similarity to the larger 3ft Clogher Tramway engines in Ireland, but designed for 2ft-2ft 6in gauge. Due to the loading gauge issues of the mountain section, for the short term the locomotive was utilised at the Arlesburgh Harbour, shunting the vans and wagons being imported and exported from ‘Man’ and further afield. The locomotive was strong and versatile, and on occasions was borrowed for mineral traffic out of the quarries and mines at Marthwaite and Ffarquhar Road. No. 7 was later utilised on the workman trains out of Arlesburgh but always came off the train at Arlesdale, due to the aforementioned clearances. This was all to change in 1914. Not even the pleasant way of life on remote Sodor could escape the upheaval of war across Europe. The SODOR REGIMENT at Peel Godred was thrust into action and troop trains were provided by the MSR. It soon became clear that the army would be required to transport munitions and such on the railway, and decision was finally made to open out the fourth tunnel near Ulfstead Road. The army were good enough to oblige and help the MSR engineers. The infrastructure work finished in early 1915. No. 7 made his first venture on a test train not long after. No. 7 and No. 6 ‘JIM’ were utilised heavily for the war effort (being the strongest locomotives in the MSR fleet). In the late 1920’s until the closure of the Cas-ny-Hawin-Peel Godred section, No. 7 would be used extensively on the morning workmen’s train from Peel Godred, being stabled at the old station site ‘Arlesburgh Road’. With the 1936 closure, and the engine being in poor mechanical condition due to years of hard work, No. 7 TIM was sold. Whether this was to another railway, or scrap is sadly unknown.

We have had some new arrivals in the last month. I'd like to reveal firstly, MSR No. 6 'JIM'. Awdry's models were the old varikit from GEM that were not based on any particular prototype. Over the last few months I've been researching various prototypes that I feel were suited to a 25 mile railway with a steep mountain section. Enjoy! MSR No. 6 ‘JIM’ Livery - Green By the early 1900s, it had become clear that the MSR had severely underestimated the demand for goods traffic on the line. Numerous engines had come and gone over the years, but nothing that was present at this time, was particularly suitable. For goods traffic covering the 25 miles between Arlesburgh and Peel Godred double heading was becoming far more frequent, more than the MSR board were happy with. By 1906, the situation was becoming desperate. The board had been keeping its eyes on narrow gauge events further afield. 1906 saw the construction and delivery of a large 2-6-2 tank engine by Hunslet of Leeds, for the North Wales Narrow Gauge Railway. The MSR board were particular impressed and a locomotive of a similar type was ordered. On arrival in 1907, the engine was named ‘JIM’ and given the No. 6. There was a however, a problem before the locomotive had even turned a wheel. There were severe clearance issues, in particularly regarding height, in the fourth tunnel of the ‘Mountain Road’. This information was common knowledge, but did not appear to have been passed on to Hunslet. There was a brief quarrel! The Board, blamed the Manager, the Manager blamed the foreman, the foreman blamed the chief fitter and the chief fitter blamed....well he had no one else to blame, so had to come up with a solution quickly! It was decided to cut down the locos fittings to within the loading gauge, reducing the height of the chimney, dome and cab. The tunnel situation was alleviated years later during ‘The Great War’ when the MSR carried military material from the Peel Godred garrison and the tunnels were opened out to a more generous clearance. Jim’s lower fittings were never altered throughout his working life on the MSR, which lasted until November 1936 when the locomotive was sold.

Thanks for all the kind comments. Genuinely touched by the feedback. I’ll update the first post of the thread with images and then do a link to where the images start again. I’ll do a proper post with updates tonight. 🙂

Old No. 2 'RHENEAS' prepares the last slate load of the day, as the autumn sun begins to hang low in the sky...

Thanks for the kind feedback. I will continue to post on RMweb, but just need to think about the best way forward. I really don't want to go back through the thread re adding photos to posts, as I'm not sure I have all of them still. In the meantime, a photo 🙂

Thanks for the kind comments SR71 I'm still here, but have generally been posting more in my Facebook group and on Narrow Gauge Railways Modelling Forum since RMweb went down. I've lost some of my enthusiasm to post since all the photos have gone. Photography is one of my main enjoyments of the hobby, and to see all of them have gone from the thread was a little soul destroying. I appreciate this was no fault of Andy or BRM, and I feel for them in what must have been a very difficult time. I'm just deciding the best cause of action going forward.

Quite a big arrival came today. My bespoke Mid Sodor Railway goods stock transfers from Endon Valley Custom Decals. Absolutely superb quality and exactly to the specifications I requested. Looking forward to building up the goods fleet for Ballamoddey.