CazRail

I was the same thinking it was almost complete before I took a closer look!

Thanks, Rich, using Heki's Wildgrass makes the job easier and faster, but it had a knack to it to get it to look good, Thanks again, Nick. How's progress with Maentwrog Road's extension? Had some more unexpected modelling time this afternoon, so out with the glue and wildgrass and I finished off board 3 and begun the lineside on board 4. In this photo it shows the blending I've managed between the 6mm static grass matting and the Heki wildgrass. Around the crossing will be somewhat clearer as vegetation is regularly cut to maintain sighting for the user, as well for the train driver to be able to observe any possible risks on the crossing. I finished the linesides on board 3, where the line enters the cutting which leads onto board 4. I've now run out of Wildgrass, so will need to wait until I have some funds to get more. Happy modelling!

Some scenic progress today with the arrival of a parcel from Howard Scenery Supplies... Heli Wildgrass: HSS' own tufts and elements: So I began experimenting with the three products on board 2, then on to board 3. I infilled gaps between bushes with the Heki wildgrass, then planting the tufts and elements where I saw fit. I was inspired to try Heki wildgrass from the Bennet Railroad on YouTube, a stunning US layout. These are the results... Really enjoying using these scenic products, and really recommend Howard Scenic Supplies.

Off topic, but what a model this would be in 'OO'... Britannia Bridge from the Anglesey end.

Liking this thread... For me, as well as others, a DB 60 is an obvious choice, the ones Hornby have made were all 'special' ones, so a plain one would be good. I'd also like a Romanian 56 in Dutch with Transrail branding, one of the DB 67s with lies written down the sides and maybe a few new post 1970 wagons.

Very intetesting. Did the story of Tryweryn as well as a trip there back when I was in school, so this is very interesting to me

The track has been ballasted and a start made on the user-worked crossing... I then had a short photo-shoot with my weathered EWS 37703..

Some footage of testing after wiring was complete.

The base scenery all glued in, it was time to lay the eagarly awaited track! Again, just a single length of bullhead track, glued down. 56087 appeared again with it's spoil train... Wiring and testing next, then ballast! [EDIT: Why the first image of 56087 is upside-down i havent a clue]

His profile says "this member is no longer active"

The 68 looks the part! Makes me want to dirt mine up! Caz

This project is really coming along- watching with keen interest! Caz.

Base layer of scatter down, signs for the crossing made... Colas sent 56087 on an engineering train to Amlwch...

Today got some more done due to a visit to my parents. First job was to skim over the polystyrene with a palm sander to smoothen it out, and to form the fields either side of the track. Then, using sheets of static grass, I grassed the upper field, and grassed the crossing to create the effect of vehicles going through long grass. I havent yet finished gluing down around the crossing, as the shape the grass sheet needs to be coundn't be achieved in a oner. The Network Rail Land Rover demonstrates the crossing... Then to get a feel for things, I posed 31296 with a brake van and a VDA on the board...

More done to the lanscape with the knife this afternoon, including blending in hill slopes, cutting sides and earthworks for the crossing. The small raised part on the down side... Ready to be shaped. Earth works for the user worked crossing coming on... More to do, but the rest of the shaping will be with a palm sander. Once done, I can glue down static grass sheet where required.

More polystyrene has been added to the Llangefni end of board 4, which will represent a very short rock cutting, which Ill use as a scenic break leading into the Dingle. Ive also purchased a pot of Acrylic Gloss Medium to represent water. Will post photos when I progress.

Looks very interesting looking forwards to more!

My layout's boards can only hold the length of 1 flexitrack, so my plan is to use immitation fishplates, and cut just the railhead so it looks like a joint. Im going to space the joints every 24 sleepers, trying not to allow joints fallon structures. Yes there will be shorter panels, but that happens on the real railway.

For a 60ft panel, 24 sleepers, to be accurate the 4 around a joint are closer together.

Ive found the same using ballast bond, i just put it down to the fact Im using fine Woodland Scenics ballast, which to me is good for representling the old smaller type of ballast, still to this day found on branch lines. I give it a quick misting of water before ballast bond which seems to work. Any patching I do with a small brush, teaspoon and neat pva, which is something to keep me ocupied! Caz.

Ive been to sites where sections of line have been made red-zone prohibites due to vegetation(or close proximity of it to the running line). Signals and crossings are managed, obscured signals and signage reported by drivers to fault control, and crossings periodically inspected by crossing inspectors. All these instances are regarded as faults and responded to by on-call NR staff.

A small update this evening, just some polystyrene sheet added for landform. Will be shaped as soon as I get a chance.

Thanks guys. I think my course of action will be to firstly lay my length of Peco Bullhead, then to use C+L chairs and rail using 4-screw chairs(as check-rail chairs are 4-screw, so the four-foot will be correct!) glued to the peco sleepers. Thanks for the input guys.

Thanks Merfyn. I didn't explain my idea very well, sorry! I meant the chairs/ trimmed sleepers of the checkrail would sit in the cribs between sleepers of the flexi track, so it's staggered or interlaced if you like. You'r method with C&L chairs is the better option, Ill have full cribs and it'll look better accross longitudinals. I'll have a look into it.

I'm not sure if anyone has discussed this previously on here, probably have. Would anyone know of a way to model check rails on a tight curve? I'm using Peco Bullhead, my idea is to use spare left over lengths, trim the sleepers and fit it within the sleepers on the track. Does anyone have any possible alternative? Cheers Caz.